View Single Post
05 Apr 2011  
dsperber

Windows 7 Pro x64 (1), Win7 Pro X64 (2)
 
 

Quote   Quote: Originally Posted by saeen View Post
I restarted my pc and now its giving me this error. "the boot selection failed because a required device is inaccessible". I've 2 drives 500GB + 1000GB, windows is on 500GB drive which I check through BiOS & shows SATA Port 0 = (0.0GB), SATA Port 1 WDC WD10EARS-0 (1000.2GB). Please guide.
Assuming your motherboard has more than just two SATA connectors, how about trying removing the 500GB drive cable from "Port 0" and reconnecting it to say SATA Port 3" (or just some other available SATA connector on the motherboard)?

It might be the SATA port 0 connector on the motherboard that is flaky.

Note that by moving the drive to another SATA connector, you might get some rumblings from Win7 at first boot after that, talking about "new hardware detected" and requesting a re-boot after the drivers get installed. Really, not much is going on here but if it does you should reboot. Everything should be back to normal after that second reboot.

Anyway, hopefully this use of another SATA connector might solve your problem.

You might also try removing the SATA cable from the drive, and then re-seating it again. Sometimes that's all it takes.

Hopefully, your 500GB drive hasn't actually died.
My System SpecsSystem Spec