View Single Post
07 May 2012  
writhziden

Windows 7 Home Premium 64 Bit
 
 

Security Software: ??? I recommend either of these two setups:Download and install the security setup of your choice, update the software, and then run a full scan of your system for viruses and malware. If you only install MSE, I would also suggest installing and updating Malwarebytes : Free anti-malware, anti-virus and spyware removal download, but do not start the free trial/full version of Malwarebytes. Run a full scan with Malwarebytes after updating it. Post back the results.


The crashes were caused by a USB device. Could be remnants of the keyboard that gave the Lycosa.sys crash, or it may be another device. What USB peripherals are you using? Before doing the following, disable Verifier using the steps given by zigzag3143.
  • Start with USB Driver - General Fix for Problems to resolve the USB issues. Also, USB ports can sometimes enter a safe power state to protect the system from power surges due to USB devices. To reset the USB ports to a nominal power state:
    1. Shut down and turn off the computer.
    2. Unplug the computer from the wall or surge protector (then remove the battery if it is a laptop).
    3. "Remove the computer from any port replicator or docking station, disconnect
      cables to printers or devices such as external monitors, USB memory sticks or SD cards, headset or external speakers, mouse or auxiliary keyboard, turn off WIFI and Bluetooth wireless devices." (Use Hard Reset to Resolve Hardware and Software Issues HP Pavilion dv5000 Notebook PC series - HP Customer Care (United States - English))
    4. Hold down the power button for 30 seconds. This closes the circuit and ensures all
      power from components is drained to clear the software connections between the BIOS
      and hardware and clear any corruption in the temporary memory.
    5. (If it is a laptop, plug the battery back into the laptop and then) Plug the computer back into the wall. Do not reconnect any unnecessary peripherals; monitor, keyboard,
      and mouse should suffice and be the only peripherals reconnected.
    6. Turn it on to reinitialize the software connections between the BIOS and hardware
My System SpecsSystem Spec