View Single Post
04 Nov 2012  

win7 ultimate x64
what now?

i d/l the zip file.
the manifests fo;der is empty in it.

after pasting the files to the packeges folder i ran the SURT. it tooks time and finished succesfully.

i didn't get the error that you mentioned (0x8024200D) si i didn't pressed the link you entered. should i? although there were no error?

should i try the windows update now?

thanks again!

Quote   Quote: Originally Posted by tom982 View Post
Hello eyino and welcome to the forums

Windows Update Package Replacement

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. Please download the attached file, and save this to your Desktop.
  2. Right-click on the file and select Extract All...
  3. Tick the box labelled Show extracted files when complete then click Extract
  4. A window will open showing two folders, Manifests and Packages
  5. Open the Manifests folder and copy the files into the following folder (if there are any files)


  6. Open the Packages folder and copy the files into the following folder (if there are any files)


  7. Run the System Update Readiness Tool (SURT) again
  8. When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:


You will probably be shown the error code 0x8024200D after performing this fix, if so, please download and install the update from this link. It must be downloaded using Internet Explorer.

Download Update for Windows 7 for x64-based Systems (KB2732487) from Official Microsoft Download Center

My System SpecsSystem Spec