View Single Post
09 Dec 2012  
x BlueRobot

 

Code:
BugCheck 116, {fffffa800a6c1010, fffff880051a5b10, ffffffffc000009a, 4}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+993b10 )
Reinstall NVIDIA GeForce GTX 680:

Code:
 Timestamp:        Sat Dec 01 03:24:02 2012 (50B97852)
Download Latest Driver > Uninstall Current Driver > Reboot > Run Driver Sweeper > Reboot > Reinstall Driver

Code:
Usual causes:  Video driver, overheating, bad video card, BIOS, Power to card
Driver Sweeper will scan for any left over files from the old driver, old driver files can cause conflicts with new driver installations. Create a System Restore point beforehand, in case any problems or issues arise.

Driver Sweeper:Driver Download Page:
Follow these steps:Overclocking -
I recommend if you are overclocking any hardware, that you reset these values within the BIOS to their default values in order to increase the stability of your system.

Please run the following tests for your graphics card and RAM:
Run Memtest86+ for least 7-8 passes, and preferrly overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Graphics Card:Read all the steps within the hardware test tutorials very carefully, as stress tests is designed run components to their maximum capacity, in order to point out failing or faulty hardware components.

Use the following program to monitor your hardware temperatures during the stress test:Hard Drive:Scan for corrupted or missing Windows files with:Check for any driver compatibility issues with:If you are using DirectX, then try uninstalling and then reinstalling the DirectX Runtime:
Please post back your results
My System SpecsSystem Spec