Windows Error Reporting pt 2

swarfega · Jan 31, 2009

Ok so I disabled WER couple weekds ago due to it slowing down my connection as it was reporting hundreds of issues with GLID.

Now that there appears to be no more GLID problems I would like to re-enable WER so I can help MS improve Windows 7.

Unfortunately it wont restart. When I go into Services and change startup type from disabled to automatic or manual an error saying "The system cannot find the path specified" comes up. Is there anything I need to enable before restarting this service?

Brink · Jan 31, 2009

Hi Swarfega,

Did you already undo this as well if you did it to?

http://www.sevenforums.com/media-center/2864-critical-events.html#post27034

swarfega · Jan 31, 2009

Yes I did, its currently set to 1. Im relunctant to enable that again for WMP as it was that which was generating all those errors. Unless theres a way to enable WER for everything EXCEPT WMP.

Brink · Jan 31, 2009

Swarfega,

You might see if running a sfc /scannow command can fix the problem with the path not being found.

I do not know how to do it with only WMP not included, but you should be able to also enable it through the Local Group Policy Editor. It will be under Computer Configuration->Administrative Templates->System->Internet Communication Management->Internet Communication settings, then disable (not configured) Turn off Windows Customer Experience Improvement Program.

swarfega · Jan 31, 2009

Ok set that to disabled but still unable to set the WER service.

Brink · Jan 31, 2009

Swarfega,

My WER Service is set to Manual and not started by default.

Right click on the WER Service and click on the Log On tab, then double check to make sure that only Local System account is selected.

Mark · Jan 31, 2009

I'm having the same problem with several services and I can't enable them again,

Services that wont start are:

Computer Browser: Disabled

IKE and AuthIP IPsec Keying Modules: Disabled

Human Interface Device Access: Disabled

IPsec Policy Agent: Disabled

KtmRm for Distributed Transaction Coordinator: Disabled

Net.Msmq Listener Adapter, Set to Auto but wont start; Error 1075: The dependency service does not exist or has been marked for deletion.

Portable Device Enumerator Service: Disabled

Tablet PC Input Service: Disabled

TCP/IP NetBIOS Helper: Disabled

WebClient: Disabled

Windows Defender: Disabled

Windows Driver Foundation - User-mode Driver Framework: Disabled

Windows Error Reporting Service: Disabled

All services that are disabled show the message: The system cannot find the path specified.

davehc · Jan 31, 2009

This is serious! I have no prblems yet but am interested, now, in any other feedback. In Ms config, I have quite a few services which show stopped. They are mostly on manual in Services.msc, so I am not too concerned.
But,Mr.Grim, have you tried logging in under another usr or, better, as the global Administrator. Perhaps you need the latter to restart services?

Mark · Jan 31, 2009

Yes I tried in safe mode and I enabled the administrator account to see if that worked but still no difference, one thing I should mention is that UAC has been off since I installed, so I don't know if I have been infected with something that's stopping me from starting services.

Saying that, I have not seen any unusual network or CPU activity so I think this is something else, maybe some sort of device conflict or software that I installed. I also noticed the my Reliability monitor stopped after the second day of install so thats probably when the other services got disabled.

swarfega · Jan 31, 2009

Brink said:
Swarfega,

My WER Service is set to Manual and not started by default.

Right click on the WER Service and click on the Log On tab, then double check to make sure that only Local System account is selected.

Yes thats the only thing thats ticked in that tab. I cant even set the service to manual atm.

Brink · Jan 31, 2009

Swarfega,

Have you already tried doing a System Restore to see if that may help?

swarfega · Jan 31, 2009

No, Id rather not have to resort to that if it can be avoided :/

swarfega · Jan 31, 2009

Ive ran sfc /scannow which didnt find any problems. Ive set DisableInbandScheduleLoading and GLID to 0 in registry. Ive reset Turn off Windows Customer Experience Improvement Program to not configured.

Brink · Jan 31, 2009

Swarfega,

I do not know what else to suggest. It's got me baffled to.

davehc · Feb 1, 2009

Just had a quick google and found some repeated entries on the web concerning this problem on Vista with Powershute. ???

swarfega · Feb 1, 2009

Hopefully this will be fixed in RC1.

Mark · Feb 2, 2009

Thought I would let you know that the repair/upgrade installation applies to Windows 7 as well, I just tried it to see if I could get those disabled services back up and it all went smoothly and is now fully functional again, all programs and settings remained untouched aside for a registry tweak for the sidebar to work with UAC off.

Repair Install For Vista - Vista Forums

UPDATE - Windows 7 tutorial:

http://www.sevenforums.com/tutorials/3413-repair-install.html

swarfega · Feb 3, 2009

Yes that suggestion worked. I had to reinstall a couple of apps and windows updates but no big deal. It could be an idea to do this once a year to stabilise your system.

Windows Error Reporting pt 2

da Cleaner

My Computer

Administrator

My Computer

da Cleaner

My Computer

Administrator

My Computer

da Cleaner

My Computer

Administrator

My Computer

AKA Mr GRiM

My Computer

New member

My Computer

AKA Mr GRiM

My Computer

da Cleaner

My Computer

Administrator

My Computer

da Cleaner

My Computer

da Cleaner

My Computer

Administrator

My Computer

New member

My Computer

da Cleaner

My Computer

AKA Mr GRiM

My Computer

da Cleaner

My Computer