View Single Post
09 Nov 2009  
ratePV

Windows 7 SP1 x64
 
 

Quote   Quote: Originally Posted by skunksmash View Post
Quote   Quote: Originally Posted by ratePV View Post
Quote   Quote: Originally Posted by skunksmash View Post

45nm C2Ds are good for 1.4v 24/7 (with good cooling), the early ones were dying when you passed 1.35v but those days are gone....
A good 1.22 V would be good on my CPU.
The FSB is double-pumped so FSB:RAM should be 1:2
or in my case 400:800
And 400 x multiplier(9) equals 3.6 GHZ exact

The cooler is box but its surrounded by 2x12cm Fans witch gives me a
45-50 C so there shouldn't be any problems with that i think

What do you think?
i hope that (45-50c) is your load temp..?? not idle..??

It's always on these marks (loaded or idled)
The max i had is in this summer(abt 53 C) but never anything above...

Hey here is a good article:How to overclock an Intel E8400 CPU to 3.6GHz with a Gigabyte mainboard and DDR2 800MHz RAM | eHow.com
My System SpecsSystem Spec