View Single Post
26 Dec 2009  
chev65

Windows 7 Ult, Windows 8.1 Pro,
 
 

Just go to the router set up page and look for the firmware update tab. Although they show no Windows 7 support it might be worth a try. Didn't work for the last guy though as you can see.

Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Use admin for both Username & Password...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".

Now reset your Gateway :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your Gateway, wait for 30 seconds and re-connect the power cable...Now re-configure your Gateway...
My System SpecsSystem Spec