View Single Post
26 Jan 2010  
pete256

windows 7 Ultimate 64 Bit
 
 

well, i plugged the HDD back in and its working now... makes it hard to narrow the problem down seeing as it is so inconsistan.

I finally got the HDD checking utility to run, it took a while, on the newest version i got a cable test error for all my HDDs went back to an older version and got the extended test to work, here are the results

Test Option: QUICK TEST Model Number: WDC WD1500HLFS-01G6U1 Unit Serial Number: WD-WXC0CA972650 Firmware Number: 04.04V02 Capacity: 150.04 GB SMART Status: PASS Test Result: FAIL Test Error Code: 06-Quick Test on drive 1 did not complete! Status code = 07 (Failed read test element), Failure Checkpoint = 97 (Unknown Test) SMART self-test did not complete on drive 1! Test Time: 21:58:21, January 26, 2010 Test Option: EXTENDED TEST Model Number: WDC WD1500HLFS-01G6U1 Unit Serial Number: WD-WXC0CA972650 Firmware Number: 04.04V02 Capacity: 150.04 GB SMART Status: PASS Test Result: FAIL Test Error Code: 08-Error was detected while repairing bad sectors. Test Time: 22:27:00, January 26, 2010
My System SpecsSystem Spec