Quote: Originally Posted by TrePaul86
Alright sorry for the overpost in the thread, but it's all related to the OP's question. So here's where I'm at again.
I uninstalled all the audio drivers and wiped the SWsetup folder and then ran the sp34634.exe audio driver installer. Of course came back failed so I went in and edited the "cpl308Ba.inf" file with the [Conexant] strings.
Added in as a 3rd line of "%*WDM_AMCAUD.DeviceDesc%=WDM_AMCAUD,<x>"
And for the <x> I first tried "HDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_103C30A0&REV_1000
" and let it run and it actually ran a lot longer trying to install then the first few attempts. So then I went in and changed the string to look like this:
Replacing the HDAUDIO\FUNC_01& to a simple PCI\. That way it matched the other 2 strings above it. Still ran about the same time trying to install and both cases I just tried came back with the same error message:
"This device cannot start. (Code 10)"
Now I'm stuck. I just want sound!
TrePaul86: just to clarify, you have downloaded the conexant ac-97 driver and not the HD driver? the HD driver will NOT work, ever. Also, restart your computer and smash F8 and select "Disable Driver Signature Enforcement" and see if that does anything. And one more thing: are you installing the drivers manually via Device Manager or are you using the setup program that came with it? If you are using the setup program don't, just do it manually.
And yea, using the HDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_103C30A0&REV_1000
was incorrect, since you don't have HD Audio on your dv1000. You need to use the PCI string.
Lastly, make sure that your PCI\VEN_14F1&DEV_5047&SUBSYS_103C30A0&REV_1000 isn't listed under the "flags" section. That will block installation.
Good luck, let us know