Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: single drive, 3 paritions, one OS per parition, image backup/restore

08 May 2012   #11
kado897

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bit Service Pack 1
 
 

No Problem M18XR2 and by the way welcome to Seven Forums. You will get a lot of helpful advice here. Too much sometimes.


My System SpecsSystem Spec
.
19 Jul 2012   #12
M18XR2

window 7 64 bit
 
 

Quote   Quote: Originally Posted by kado897 View Post
No Problem M18XR2 and by the way welcome to Seven Forums. You will get a lot of helpful advice here. Too much sometimes.
thanks for all the help from before, but now i am facing new problem :'(
ive learned many things such as active partition, system partition (which is active) etc and now i recently tried to restore an old image and when done and try to boot into it i get BSOD.

after looking into it i realized its because i changed my array from AHCI to RAID, which imo it shouldnt matter much, its still the same file, same partition and same system files too.

backing up image from AHCI and used it on RAID cause BSOD in bootup during windows and vice versa. any idea? is it a known issue for reflect macrium? maybe i shouldnt have posted in here and should post in macrium forum instead, sorry if i break any forum rules.
My System SpecsSystem Spec
19 Jul 2012   #13
kado897

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bit Service Pack 1
 
 

Hi M18XR2.

RAID is not something I have any experience with. I think you may get a response from more people if you start a new thread for this.
My System SpecsSystem Spec
.

Reply

 single drive, 3 paritions, one OS per parition, image backup/restore




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Restore Image from "Two-Drive" Setup to Single SSD
I want my OS and programs on a new 256GB SSD. I've created an image of my current system - OS on C: drive and program files on D: (modified registry to install all programs to separate physical drive D: by default). Is this fairly straight-forward, or will I need to do any tweaking or...
Backup and Restore
Can Partition image restore to single HDD?
Hi I am not an expert and hope some one can help/advice. AIM: to restore an image of a working Win7 to a new HDD BACKGROUND: Original PC has 3 partitions .--1st Win XP , 2nd Win 7 64bit HPremium--no 100mb boot partition .3rd data partition. PLOP boot manager installed on MBR of HDD( I...
Backup and Restore
Restore from full image just one drive.. Possible? Windows Backup tool
Hello: newbie here I looked but I couldn't find the answer. I had made a full image of 3 drives using Win 7 backup tool. However, since then, I have removed 2 of the disks but I want to restore just one of the drives where the OS was installed (these are physical HDD= 3). Windows restore CD...
Backup and Restore
Image Restore can't find Backup Image
I need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location." Putting in the...
Backup and Restore
restore from raid 0 image to single drive
I have windows 7 pro and running a raid 0 system. I am using Macrium 5 to backup the disk image. In the event of a HD failure will I be able to replace the raid drives with a single drive and restore the disk image or will I have to stay with a raid 0. I understand the drive or drives will have to...
Backup and Restore
Backup Image with Windows Backup and Restore
I have been using Acronis Rescue disk to make images of my system. It works fine, but is a pain because I have open up the case and disconnect my secondary hard drive and change from my wireless mouse to a wired mouse. So I decided to try to the built-in Backup and Restore in Win 7 Pro and...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:45.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App