Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Possible to covert a plain system part. copy to ISO and make bootable?

23 Aug 2012   #41
Dali362

Windows 7 Home Premium
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
You have win7 home premium? 32 bits or 64bits and what language? Do you have win7 install DVD? Have a win7 system repair disk? Other win7 machines in house?
You don't need recover DVD at all!! If all attempts fail... you can do a clean install

I think you're Swedish.. right?
If so:

Windows 7 Professional SP1-U ISO
Swedish x86: X17-59271.iso
Swedish x64: X17-59273.iso

So if you have 32bit win7 download the first one, otherwise the second one. You can unlock all versions (so also Home Premium) using
Create Windows 7 Universal ISO With All Editions Selection On Install with ei.cfg Removal Utility My Digital Life

After that burn the ISO using The Official ImgBurn Website to DVD.
Thanks a lot, yes, if all atempts fail I`ll use the clean install procedure you advice. By the way, we have another PC (desktop) at home with WIN7 professional, but it is 64 bit, wheras my Asus Eee is 32 bit. The Asus did not come with any installation media, as I wrote before. I have a system recovery DVD as well as System Reparation DVD for my stationary, but since it is 62bit,its of no use on my Asus.


My System SpecsSystem Spec
.
23 Aug 2012   #42
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Code:
reg   query  hklm\system\mounteddevices
Does work?
My System SpecsSystem Spec
23 Aug 2012   #43
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Dali362 View Post
Quote   Quote: Originally Posted by Kaktussoft View Post
You have win7 home premium? 32 bits or 64bits and what language? Do you have win7 install DVD? Have a win7 system repair disk? Other win7 machines in house?
You don't need recover DVD at all!! If all attempts fail... you can do a clean install

I think you're Swedish.. right?
If so:

Windows 7 Professional SP1-U ISO
Swedish x86: X17-59271.iso
Swedish x64: X17-59273.iso

So if you have 32bit win7 download the first one, otherwise the second one. You can unlock all versions (so also Home Premium) using
Create Windows 7 Universal ISO With All Editions Selection On Install with ei.cfg Removal Utility My Digital Life

After that burn the ISO using The Official ImgBurn Website to DVD.
Thanks a lot, yes, if all atempts fail I`ll use the clean install procedure you advice. By the way, we have another PC (desktop) at home with WIN7 professional, but it is 64 bit, wheras my Asus Eee is 32 bit. The Asus did not come with any installation media, as I wrote before. I have a system recovery DVD as well as System Reparation DVD for my stationary, but since it is 62bit,its of no use on my Asus.
System Reparation DVD??? You mean system repair disk?
System Repair Disc - Create
Do you have it?
My System SpecsSystem Spec
.

23 Aug 2012   #44
Dali362

Windows 7 Home Premium
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Code:
reg   query  hklm\system\mounteddevices
Does work?
Yes, it worked, the two numbers are different, for D it reads B2D25BCB005AA9DE1D000000


for C
B2D25BCB00007E0000000000
My System SpecsSystem Spec
23 Aug 2012   #45
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

reg query hklm\system\mounteddevices

What is listed at DosDevices\D ?
My System SpecsSystem Spec
23 Aug 2012   #46
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Code:
reg  load hklm\win7old  D:\windows\system32\config\system
reg  query  hklm\win7old\mounteddevices
What is listed at DosDevices\C ?
My System SpecsSystem Spec
23 Aug 2012   #47
Dali362

Windows 7 Home Premium
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
reg query hklm\system\mounteddevices

What is listed at DosDevices\D ?
There is a myriad of various numbers, I think the best will be for me to make a screenshot and post it here, but it will have to wait until tomorrow. Good night and hopefully "see you" tomorrow.
My System SpecsSystem Spec
23 Aug 2012   #48
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Dali362 View Post
Quote   Quote: Originally Posted by Kaktussoft View Post
reg query hklm\system\mounteddevices

What is listed at DosDevices\D ?
There is a myriad of various numbers, I think the best will be for me to make a screenshot and post it here, but it will have to wait until tomorrow. Good night and hopefully "see you" tomorrow.
I think it's B2D25BCB005AA9DE1D000000 ??
My System SpecsSystem Spec
23 Aug 2012   #49
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Code:
reg  load hklm\win7old  D:\windows\sytem32\config\system
reg  query  hklm\win7old\mounteddevices
What is listed at DosDevices\C ?
Do you see value B2D25BCB005AA9DE1D000000 as well in output?

I'm not interested in lines starting with \??\Volume{
My System SpecsSystem Spec
24 Aug 2012   #50
Dali362

Windows 7 Home Premium
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
reg query hklm\system\mounteddevices

What is listed at DosDevices\D ?
Possible to covert a plain system part. copy to ISO and make bootable?-screenshot-command-line.jpg

Good Morning Kaktussoft, heres the command line screenshot, down at the shot you will see that I tried to work the two lines you asked for, but no way, the first of the two says "File inaccessible as it is used by another process" and the second line: It was impossible to find the registerkey or the value that was given". Any ideas how to go around this?


My System SpecsSystem Spec
Reply

 Possible to covert a plain system part. copy to ISO and make bootable?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Why no copy of the windows folder when you make a system image?
Just wondering why Windows allows you to select all files but the windows folder on your C drive when choosing what files to backup? Also what is the best way to make a copy of the windows folder manually? In safe mode? Because alot of the files, especially .log, are in use, and can't be copied...
Backup and Restore
Make bootable ISO from bootable USB Drive
I have a USB drive with Ophcrack and a rainbow table in it. I can boot from it. I want to make an ISO from it with the table still installed. I'm trying to use it on VMware. I've tried using PowerISO by opening the files and saving them as an ISO. It wouldn't boot.
Software
Does my system image to a new hard drive make it bootable?
I used Macrium to make a system image of my existing drive onto a new hard drive and I made the system rescue boot disk too. (HP all-in-one desktop) I'm not certain about the next step. Do I just replace the old drive with the new one and boot up? It is a system image, so why not? What is...
Backup and Restore
Copy entire system from backup image over bootable fresh install?
Hi, I have a drive that was using PGP that has become damaged and will not boot despite trying 3 days of different fixes and repairs. I have a complete drive backup that will restore but when I try and boot after my PGP password I get 'Missing operating system'. Again I have tried decrypting...
Installation & Setup
System Part and Boot Part Diff Drives. Want to Align SYS and BOOT
Alright here is my issue as best as I can explain it. I have two drives, one with a system partition one with my boot. The one with the boot is the drive I want to use as my primary. I want to format the drive with the system partition. How can I move the sys partition to the boot drive so that...
Installation & Setup
how do i make a partition part of my c drive again
I basically have a partition thats is now unallocated space due to me deleting the volume and I would like to make it part of my c drive again how do i go about doing this?
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:53.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App