Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: ATM 2013 (Acronis True Image 2013) with USB3 HDD

16 Sep 2012   #1
jimbo45

Linux CENTOS 7 / various Windows OS'es and servers
 
 
ATM 2013 (Acronis True Image 2013) with USB3 HDD

Hi there
Anybody used this yet -- I need to upgrade my imaging program - I now have USB3 slots on the laptop and want to know if Acronis 2013 will backup / restore to a USB3(only) external disk at USB3 speeds. I don't want this to run in USB2 compatibility mode speed.

I can use the try before buy - but hopefully someone has already tried this and saves me the bother of installing and testing this feature.

(OS W7 X-64 Enterprise).

Cheers
jimbo


My System SpecsSystem Spec
.
16 Sep 2012   #2
fireberd

Windows 10 64 bit
 
 

I haven't tried it as I don't have a USB 3.0 external hard drive (I have USB 3.0 ports on my new motherboard). But, I suspect that the port speed is independent of the applications software such as True Image.
My System SpecsSystem Spec
16 Sep 2012   #3
HammerHead

win 7 X64 Ultimate SP1
 
 
Side Note

The last issue of Acronis I used (2012) replaced my disk drivers when it was installed. When I had some other problems with it and tried to uninstall it the installed disk drivers were really difficult to remove. The problems are well documented on Acronis forums and also here if I can find the link. Could not find the link.
My System SpecsSystem Spec
.

16 Sep 2012   #4
fireberd

Windows 10 64 bit
 
 

I just checked my SSD, hard drives and optical drives and they all still have Microsoft supplied drivers, according to Device Manager. I have the new Acronis TI 2013 version. I checked another PC that has the 2012 version and it too shows Microsoft drivers.
My System SpecsSystem Spec
16 Sep 2012   #5
HammerHead

win 7 X64 Ultimate SP1
 
 
Disk Drivers

I can't explain that. The drivers were changed in my case. To correct that I finally did a clean reinstall. When I was working on it there were posts on the Acronis forum that refered to it. I finally demanded a refund.
My System SpecsSystem Spec
16 Sep 2012   #6
HammerHead

win 7 X64 Ultimate SP1
 
 
Explanation

This clip from the Acronis forum Pertains to the problem I mention with the disk drivers. I don't have a clip of device manager because the problem is now resolved.

Attachment 232066
My System SpecsSystem Spec
16 Sep 2012   #7
fireberd

Windows 10 64 bit
 
 

I've had Acronis since V10 and never was aware of any driver replacements. (They had Vxx numbers before they went to year numbered versions 2009).

The only problem I've had was the same one others had with a serial number. That problem was with the 2009 version, it was registered and working and then it came up with an invalid serial number. The fix was Acronis issued new serial numbers to those that needed them.

(I see you are ex WV, so is my wife, from the south Clarksburg area)
My System SpecsSystem Spec
16 Sep 2012   #8
HammerHead

win 7 X64 Ultimate SP1
 
 
Disk Drivers

I used to travel to Clarksburg from Parkersburg just for dinner. They had some good resturants.

My disk drivers details look like this now:

Attachment 232077

We are taking over someone else's thread. So I better quit.
My System SpecsSystem Spec
Reply

 ATM 2013 (Acronis True Image 2013) with USB3 HDD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Need help recovering image to dissimilar hardware with True Image 2013
My new computer, arriving soon, will have Windows 7 Home Premium OS, same OS I have on my current (Old) computer. Using True Image 2013, I made image of the entire Old Computer hard drive (I switched to disk mode). I will recover that image to the New Computer, using Universal Restore, from an ...
Backup and Restore
Problem Creating Acronis 2013 Boot CD
I recently upgraded from Acronis 2011 to 2013. Please note that Acronis 2011 boot cd works fine: tested booting with this cd and was able to boot to Acronis 2011. Upgraded recently to Acronis 2013 & made boot cd. Booted with 2013 CD. Acronis logo appeared on acreen & under logo appeared...
Backup and Restore
Basic Acronis 2013 ?'s
I took the plunge along with the new machine and purchased 2 new 2013 Acronis Home licenses. The immediate benefit--the backup email status notification that I could not get to work in either of the 2 existing, previous versions now works on both machines. Here are a few questions that I posted...
Backup and Restore
True Image Lite 2013 beta offers no-frill backups
Source A Guy
Backup and Restore
Does anyone know how to use Acronis true Image
Does anyone know how to use Acronis true Image. I have Lost 52GB from my hard drive how can i get it back. The reason for it was that i made 2 backups of my computer to my documents with Acronis true image 1 was sector by sector and 1 wasn't, I then cut and pasted them into my external hard drive,...
Backup and Restore
Acronis True Image
How many installs can I use with Acronis True Image? I have 4 computers that all need a backup program. Complete hard disk recovery solution, backup, drive copy, clone and image computer software
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 13:20.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App