Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Help to make a Windows PE disc

13 Nov 2012   #31
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

Thanks,

I had forgotten there are two "program" folders in that version of BR10.

Will have a look and see if that may be causing the issue.


Quote   Quote: Originally Posted by m256997683119 View Post
Hi,

Am back here to report. I used the PARAGONPEv3.zip and rebooted to cd. It went well and I was to boot and see the same image as posted previously. I tested all the selectives in the menu and went well but could not launch "Paragon1" or "Paragon2". Please see image attached (I borrowed your image as I can't take an screenshot while using the winpe cd -- can that be added in the selection, I mean snipping tool -- not important now )

[img]http://s12.**************/ouyaj88m1/PPev3f.jpg[/img]

It was all okay except that. Well I still have the same issue with the recovery function of Windows as it cannot see my 'Windows backup - vhd file' and it's location. But the "Explorer" shows all very well. Including the Paragon trial backup I made and stored in the Seagate portable. But if I can launch Paragon and can backup/restore from there. I do not need the Windows 7 recovery option.

Can you check if I selected something wrong in the Paragon folder? Please see attached image of,

C:\Program Files\Paragon Software\Paragon Backup and Recovery 10 Suite\program
C:\Program Files\Paragon Software\Paragon Backup and Recovery 10 Suite\program2

[img]http://s9.**************/m3n2pk37v/Picture1.jpg[/img]

I selected the "launcher"(highligthed in yellow) in 'program2'. There isn't any launcher in 'program' folder.

Other than that I believe this is progressing okay. Thank you.

Will wait for your reply.

Regards



My System SpecsSystem Spec
.
13 Nov 2012   #32
m256997683119

Windows 7 Ultimate x32
 
 

I tried from the start again. This time I installed Paragon Partition Manager 11 Personal Special Edition. Went along the usual "run" of the ParagonPEv3 creator with PBR 10 and PPM 11. Rebooted to cd. Please see image attached. The inclusion of PPM 11 went through and as seen in the image it launched. PBR still remained not included(no icon still on "Paragon1").

[IMG]http://s9.**************/d8uleukaz/DSC03245.jpg[/IMG]

Since I have Image for Windows 8, I tried to install it. And include it in the pecreator. Image for Windows 8 was the first to be detected and included. I selected PPM 11 second and PBR 10 3rd. Please see 2nd image attached. Image for Windows 8 and PPM 11 launched but still there is no PBR10.

[IMG]http://s15.**************/dn4i61qcn/DSC03247.jpg[/IMG]

I rebooted and uninstalled PBR10. Re-installed again and repeated the pecreation using PARAGONPEv3. Did it all again but when I booted to the cd it was still like that. Only PBR10 has problems launching. I think there is something wrong with the launcher.exe or something...Prior to installing PPM11 I tried to select explauncher.exe but I got the same result.

Is there anything I can check to see why can't PBR10 be included in the winpe?

Thanks again

PS,

This is some awesome tool you made. I can't help imagining 'one winpe disk' with "Acronis-Paragon-Macrium-Easeus tools"...one ring to rule them all! (LOTR )
My System SpecsSystem Spec
13 Nov 2012   #33
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

I need to change it to work with program2\launcher.exe
My System SpecsSystem Spec
.

13 Nov 2012   #34
m256997683119

Windows 7 Ultimate x32
 
 

Quote   Quote: Originally Posted by SIW2 View Post
I need to change it to work with program2\launcher.exe
Okay. Will just wait for it. Thank you very very much for the help
My System SpecsSystem Spec
13 Nov 2012   #35
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

You could try this one for me - should be ok with your BR10. m25-ONLY-PARAGON-RunMeAsAdmin.zip


My System SpecsSystem Spec
13 Nov 2012   #36
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

New one:

PARAGONPEv4.zip
My System SpecsSystem Spec
14 Nov 2012   #37
m256997683119

Windows 7 Ultimate x32
 
 

Hi SIW2,

Okay will be back here later when I get home. I'll definitely try both and report back here. This is really a great help especially for those who like Paragon.

My System SpecsSystem Spec
14 Nov 2012   #38
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

My System SpecsSystem Spec
14 Nov 2012   #39
rkenimer

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by SIW2 View Post
Thanks for all the feedback, everyone.

RK - the one you made with special .cmd is all working fine- paragon is in there and launching properly?
Yes it is, thank you. I have Paragon Hard Disk Manager 2010 Professional, and it works.
My System SpecsSystem Spec
14 Nov 2012   #40
rkenimer

Windows 7 Professional x64
 
 

V4's multi select for drivers is working great!

My System SpecsSystem Spec
Reply

 Help to make a Windows PE disc




Thread Tools




Similar help and support threads
Thread Forum
How do I make a Windows 7 OS Disc?
I got a new computer with Windows 7 installed on it. I like to occasionally format my hard drive and start from scratch. Before I have anything else on the hard drive, I'd like to create a Windows 7 installation disc. I've read a bunch of the threads on this site and although many are close, none...
General Discussion
Way to make a Windows 7 restore disc to USB instead
Currently I can create a Windows 7 restore disk onto a CD or a DVD. Does anyone know if it's possible to create it to a USB drive instead? Thanks Josh
Backup and Restore
Make Window 7 x64 Ultimate Install Disc using Windows x64 Pro Disc
How do I make a Window 7 x64 Ultimate Install Disk using my Windows x64 Pro Disk? I read somewhere that the four versions of Windows 7 x64 (Starter, Home, Pro and Ultimate) are all on the Setup DVD you buy, the difference is only in the Setup.ins and boot pictures? I want to make a Slip-streamed...
Installation & Setup
Make Windows 7 boot disc from scratch?
Yes, you heard me, is it possible to make a Windows 7 boot disc from scratch? By scratch I mean, I want all the programs I currently have installed on my PC and some items in my secondary drives to be there too, in other words, can I take my current Windows AND the programs/items I have on my...
General Discussion
How to make a hard disc a system disc
I think I may have found an answer to my boot problem. After reading the tutorial on system image restore I saw this statement. "You can fool it into thinking that simply by marking the 7 partition as active. May be as well to make it a "secondary" system partition , by copying across the...
General Discussion
how to make bootable windows 7 disc ?
Hello all ! Im new here and i have found lots of interesting info here so far. I have been running windows 7 beta 6801 for a while, but wanted to try beta 7000, now, for some reason i cant make the dvd bootable, either my brain is just fried or im missing something, does anyone have any idea of...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App