Help to make a Windows PE disc

Thanks,

I had forgotten there are two "program" folders in that version of BR10.

Will have a look and see if that may be causing the issue.

m256997683119 said:

Hi,

Am back here to report. I used the PARAGONPEv3.zip and rebooted to cd. It went well and I was to boot and see the same image as posted previously. I tested all the selectives in the menu and went well but could not launch "Paragon1" or "Paragon2". Please see image attached (I borrowed your image as I can't take an screenshot while using the winpe cd -- can that be added in the selection, I mean snipping tool -- not important now :) )



It was all okay except that. Well I still have the same issue with the recovery function of Windows as it cannot see my 'Windows backup - vhd file' and it's location. But the "Explorer" shows all very well. Including the Paragon trial backup I made and stored in the Seagate portable. But if I can launch Paragon and can backup/restore from there. I do not need the Windows 7 recovery option.

Can you check if I selected something wrong in the Paragon folder? Please see attached image of,

C:\Program Files\Paragon Software\Paragon Backup and Recovery 10 Suite\program
C:\Program Files\Paragon Software\Paragon Backup and Recovery 10 Suite\program2



I selected the "launcher"(highligthed in yellow) in 'program2'. There isn't any launcher in 'program' folder.

Other than that I believe this is progressing okay. Thank you.

Will wait for your reply.

Regards :)

I tried from the start again. This time I installed Paragon Partition Manager 11 Personal Special Edition. Went along the usual "run" of the ParagonPEv3 creator with PBR 10 and PPM 11. Rebooted to cd. Please see image attached. The inclusion of PPM 11 went through and as seen in the image it launched. PBR still remained not included(no icon still on "Paragon1").



Since I have Image for Windows 8, I tried to install it. And include it in the pecreator. Image for Windows 8 was the first to be detected and included. I selected PPM 11 second and PBR 10 3rd. Please see 2nd image attached. Image for Windows 8 and PPM 11 launched but still there is no PBR10.



I rebooted and uninstalled PBR10. Re-installed again and repeated the pecreation using PARAGONPEv3. Did it all again but when I booted to the cd it was still like that. Only PBR10 has problems launching. I think there is something wrong with the launcher.exe or something...Prior to installing PPM11 I tried to select explauncher.exe but I got the same result.

Is there anything I can check to see why can't PBR10 be included in the winpe?

Thanks again :)

PS,

This is some awesome tool you made. I can't help imagining 'one winpe disk' with "Acronis-Paragon-Macrium-Easeus tools"...one ring to rule them all! (LOTR :) )

I need to change it to work with program2\launcher.exe

SIW2 said:

I need to change it to work with program2\launcher.exe

Okay. Will just wait for it. Thank you very very much for the help :)

You could try this one for me - should be ok with your BR10. m25-ONLY-PARAGON-RunMeAsAdmin.zip

Hi SIW2,

Okay will be back here later when I get home. I'll definitely try both and report back here. This is really a great help especially for those who like Paragon.

:)

That's good timing:

Giveaway of the Day - free licensed software daily. Paragon Backup and Recovery 12 Compact (English Version) - Paragon Backup and Recovery 12 Compact is a simple and powerful backup and recovery solution to secure stand-alone Windows desktops and lap

SIW2 said:

Thanks for all the feedback, everyone.

RK - the one you made with special .cmd is all working fine- paragon is in there and launching properly?

Yes it is, thank you. I have Paragon Hard Disk Manager 2010 Professional, and it works.

V4's multi select for drivers is working great!