Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BCD missing status:0xc000000f & Diskpart won't list my main partition

08 Jan 2013   #11
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Assume "system reserved" and "Acer" have drive letters C and D now (If different repalce dirve letters in follwing commands)

Code:
chkdsk/f  c:
chkdsk/f d:
Any problems on system reserved, any problems on Acer? Are disk problems repaired?
If repaired... run commands again to check if problems are really gone.


My System SpecsSystem Spec
.
08 Jan 2013   #12
tisungeni

Windows 7 Professional 64bit
 
 

I just checked PQSERVICE is D.
My System SpecsSystem Spec
08 Jan 2013   #13
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by tisungeni View Post
I just checked PQSERVICE is D.
System reserved is C? Acer is E?
My System SpecsSystem Spec
.

08 Jan 2013   #14
tisungeni

Windows 7 Professional 64bit
 
 

NO Acer is C and its the active one. System Reserved is E. I run chkdsk c: and it found some errors but says its in read-only mode so it can't continue. here is an image
BCD missing status:0xc000000f & Diskpart won't list my main partition-photo-0070.jpg


My System SpecsSystem Spec
08 Jan 2013   #15
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

chkdsk/f c:
chkdsk/f e:

as I told you.
My System SpecsSystem Spec
08 Jan 2013   #16
tisungeni

Windows 7 Professional 64bit
 
 

sorry. my bad
My System SpecsSystem Spec
08 Jan 2013   #17
tisungeni

Windows 7 Professional 64bit
 
 

ok the errors on ahve been fixed. On E there weren't any errors. I'll try rebuilding the BCD again now
My System SpecsSystem Spec
08 Jan 2013   #18
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

"system reserved" was active prior to having problems. It has bootmgr and boot menu. And it was called C when Acer and PQSERVICE were lost.

Do you want to have "system reserved" as the boot partition? If not you have to create bootmgr and boot menu from scratch on Acer partition. Easy to accomplish btw.

But maybe better is to mark "system reserved" as active. It is already holding bootmgr and bootmenu. At least if partition is not corrupt. If corrupt we can format it and create stuff from scratch.

Tell me what you want.
My System SpecsSystem Spec
08 Jan 2013   #19
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

diskpart
sel vol e (so system reserved)
active
exit


Now reboot.
My System SpecsSystem Spec
08 Jan 2013   #20
tisungeni

Windows 7 Professional 64bit
 
 

I've tried to run the commands again but the problem remains. when i run the attrib command it still says "file not found"
My System SpecsSystem Spec
Reply

 BCD missing status:0xc000000f & Diskpart won't list my main partition




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Boot error, status 0xc000000f
Guys, Today my OS got freezed at the loading screen and it doesn't boot anymore. After that I restarted my PC and chose the safe mode but it got stuck on the drivers selection part. Now I got this: "Windows failed to load because the system registry file is missing, or corrupt"
General Discussion
cant boot into windows 7 status: 0xc000000f
i cant get windows every time i try i get the message "File:\boot\BCD\ Stauts: 0xc00000f Info: an error occcured while trying to read the boot conifguration data." ive tried going into windows repair from my repair cd but theres no os in recovery options
Installation & Setup
Status 0xc000000f And no repair disc.
So what happened was I went to restart my computer, while I was waiting my powercord unplugged (battery is dead so its always at 0 charge) and it shut off. When I tried to turn it back on I get a windows boot manager error stating the boot selection failed because a required device is inaccesible....
BSOD Help and Support
No bootable OS, status: 0xc000000f
So, this is my Mothers laptop and she wanted Windows XP, so I went ahead and tried to dual boot it along side Windows 7. I shrinked the volume and did all those steps of one of the topics here, anyway I noticed the laptop kept constantly booting to Windows XP automatically? It's frustrating...
Installation & Setup
Status 0xc000000f I'm stuck and don't know anything about computers!!!
Hey I have a Gateway ZX6961 Windows 7 Prem OA Acer. It's a touch screen, and the guy at best buy sold me the computer fully loaded so I was given no discs. Everytime I turn it on it comes up that I need installation and backup or restore discs or whatever. I have no discs. It says status...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:58.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App