Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BCD missing status:0xc000000f & Diskpart won't list my main partition

08 Jan 2013   #71
tisungeni

Windows 7 Professional 64bit
 
 

after the sfc/scannow some errors were found corrected. I had to restart the pc. I created the manual restore point successfully. then i tried to run the chkdsk but it said the volume is in use right now and could run it at the next restart. I selected yes and restarted. It running right now.

I hope its all good. fingers crossed.


My System SpecsSystem Spec
.
08 Jan 2013   #72
tisungeni

Windows 7 Professional 64bit
 
 

the chkdsk was done. no problems. i think i can finally say its over.

thanks a lot all those who helped. Especially to Kaktussoft and mjf.
My System SpecsSystem Spec
08 Jan 2013   #73
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by tisungeni View Post
after the sfc/scannow some errors were found corrected. I had to restart the pc. I created the manual restore point successfully. then i tried to run the chkdsk but it said the volume is in use right now and could run it at the next restart. I selected yes and restarted. It running right now.

I hope its all good. fingers crossed.
run sfc/scannow again. It should find no integrity errors at all!
My System SpecsSystem Spec
.

09 Jan 2013   #74
tisungeni

Windows 7 Professional 64bit
 
 

wow i thought i was done. I ran the scan and it said they were some corrupt files but wasn't able to fix. what now? here is a printscrn.
BCD missing status:0xc000000f & Diskpart won't list my main partition-scannow.jpg


My System SpecsSystem Spec
09 Jan 2013   #75
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by tisungeni View Post
wow i thought i was done. I ran the scan and it said they were some corrupt files but wasn't able to fix. what now? here is a printscrn.
Attachment 249334
Copy that CBS.LOG file to desktop. Zip it and post the zip file
My System SpecsSystem Spec
09 Jan 2013   #76
tisungeni

Windows 7 Professional 64bit
 
 

My System SpecsSystem Spec
09 Jan 2013   #77
tisungeni

Windows 7 Professional 64bit
 
 

This is becoming too much now
My System SpecsSystem Spec
09 Jan 2013   #78
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by tisungeni View Post
This is becoming too much now
reboot. After that run sfc/scannow again

Post CBS.LOG again afterwards. Run scannow only once please. So I can analyze better
My System SpecsSystem Spec
09 Jan 2013   #79
tisungeni

Windows 7 Professional 64bit
 
 

I meant the problem is becoming too much. Not you. I appreciate that your really trying to help. I'm running the scan again right now
My System SpecsSystem Spec
09 Jan 2013   #80
tisungeni

Windows 7 Professional 64bit
 
 

Attachment 249354
Here it is again
My System SpecsSystem Spec
Reply

 BCD missing status:0xc000000f & Diskpart won't list my main partition




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Boot error, status 0xc000000f
Guys, Today my OS got freezed at the loading screen and it doesn't boot anymore. After that I restarted my PC and chose the safe mode but it got stuck on the drivers selection part. Now I got this: "Windows failed to load because the system registry file is missing, or corrupt"
General Discussion
cant boot into windows 7 status: 0xc000000f
i cant get windows every time i try i get the message "File:\boot\BCD\ Stauts: 0xc00000f Info: an error occcured while trying to read the boot conifguration data." ive tried going into windows repair from my repair cd but theres no os in recovery options
Installation & Setup
Status 0xc000000f And no repair disc.
So what happened was I went to restart my computer, while I was waiting my powercord unplugged (battery is dead so its always at 0 charge) and it shut off. When I tried to turn it back on I get a windows boot manager error stating the boot selection failed because a required device is inaccesible....
BSOD Help and Support
No bootable OS, status: 0xc000000f
So, this is my Mothers laptop and she wanted Windows XP, so I went ahead and tried to dual boot it along side Windows 7. I shrinked the volume and did all those steps of one of the topics here, anyway I noticed the laptop kept constantly booting to Windows XP automatically? It's frustrating...
Installation & Setup
Status 0xc000000f I'm stuck and don't know anything about computers!!!
Hey I have a Gateway ZX6961 Windows 7 Prem OA Acer. It's a touch screen, and the guy at best buy sold me the computer fully loaded so I was given no discs. Everytime I turn it on it comes up that I need installation and backup or restore discs or whatever. I have no discs. It says status...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App