Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Cannot figure out how to factory reset

26 Sep 2013   #1
Joeydoane89

windows 7 ultimate x64
 
 
Cannot figure out how to factory reset

When computer is started the windows logo is missing but the loading bar scrolls through 2 times the flashes over to the next screen and says "services are started" then an error message spops up and says "the installation could not be completed. Restart the computer again to continue the installation of windows" I click okay, and another error pops up that says " setup will continue after restart of computer" I click okay on that and the computer restarts and does the exact same thing...

I read that you could do a factort reset by turning off " boot booster" in the bios but I do not have this option in my bios. I did do a boot log and saw it was loading somthing called rdyboost.sys which I suspect is boot booster

. How do I factory reset my computer? Also pleasr note I do not have a cdrom nor do iI have a repair disk.

Asus eee pc x101ch
Windows 7 ultimate x64


My System SpecsSystem Spec
.

26 Sep 2013   #2
Golden

Microsoft Community Contributor Award Recipient

Windows 7 Ult. x64
 
 

Did the computer come pre-installed with Windows 7 Ultimate? What make of computer is it (Dell, Asus, Acer etc.)?
My System SpecsSystem Spec
26 Sep 2013   #3
Joeydoane89

windows 7 ultimate x64
 
 

Yed it came preloadef. Asus eeepc x101ch.
My System SpecsSystem Spec
.


26 Sep 2013   #4
johnsmith45jock

Windows 7 Home Premium 64-bit
 
 

My System SpecsSystem Spec
26 Sep 2013   #5
SandeepP

Winndows 7 32 bit
 
 

Quote   Quote: Originally Posted by Joeydoane89 View Post
When computer is started the windows logo is missing but the loading bar scrolls through 2 times the flashes over to the next screen and says "services are started" then an error message spops up and says "the installation could not be completed. Restart the computer again to continue the installation of windows" I click okay, and another error pops up that says " setup will continue after restart of computer" I click okay on that and the computer restarts and does the exact same thing...

I read that you could do a factort reset by turning off " boot booster" in the bios but I do not have this option in my bios. I did do a boot log and saw it was loading somthing called rdyboost.sys which I suspect is boot booster

. How do I factory reset my computer? Also pleasr note I do not have a cdrom nor do iI have a repair disk.

Asus eee pc x101ch
Windows 7 ultimate x64
Hi Joeydoane89,

Welcome to Seven forums.

It would be better you perform a clean reinstall on the system. Please check this tutorial which would help you perform the same:

Clean Install Windows 7

Keep us posted with the results so we can advise you further.
My System SpecsSystem Spec
Reply

 Cannot figure out how to factory reset




Thread Tools





Similar help and support threads
Thread Forum
Want to factory reset PC without CDs.
Hello, I have an older custom built PC from my father and it's starting to get a little buggy as of late, freezing and such, and honestly the hard drives are getting too full, I feel it'd be better to just wipe the thing clean and start over. The downside is I have no CD with which to reset it,...
Backup and Restore
I want to factory reset!
I am gonna cut to the chase: i have clean installed windows 7, updated Bios, my bios boot configuration are reset, i have asus k55a and an OEM recover parition and after the clean install i can`t use f9 (as it shown in this site ) and i can`t use my oem parition i am sure it`s there as show in the...
Installation & Setup
BSOD Still crashes after a factory reset. Attempt to reset the display
BSOD Still crashes after a factory reset. Attempt to reset the display driver and recover from timeout failed. I thought a clean factory reset will fix the issue. But it is still has the BSOD. I have uploaded the zip file that contains the dump as instructed.
BSOD Help and Support
I could use some help with a factory reset...
I am new to this forum and this is my first post... In light of recent events my computer has a ton of malware and spyware for the second time now... The first time I was able to go in and just go to control panel and factory reset it by clicking the option... now it no longer exists and It says I...
Backup and Restore
Need help with factory reset.
Hi everyone. I have had an Hp G60t-200 laptop for about 5 years and I want to do a factory reset. I have way too much stuff on it and would like to just start out with a clean slate again. There is a problem. It orgionally came with windows vista pre-installed without the OS disks. I got the...
Backup and Restore
cannot factory reset
hi all have been trying to factory reset a dell xps210 with vista as op sys when get to final stage and authorise it say Access to \tools\dp.sc was denied any help to get reset grateully accepted
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:16.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App