Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win 7 can't boot but start-up repair can't detect anything

14 Jan 2014   #21
Lennardson

Windows 7 Home Premium 32bit
 
 

Completely black I go through the whole starting windows animation then plunged into black with just the mouse


My System SpecsSystem Spec
.
14 Jan 2014   #22
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Lennardson View Post
Well I was installing an update to a game, but I doubt that was it since no one else who I know had the the same problem, then my computer froze I could ctrl alt del or anything, I could still open windows from my task bar but I couldn't interact with them so I manually shut it down and got this.
You just pressed the power button? Reboot again with f8 "repair your computer". Select "system restore". go back in time prior to having problems.
My System SpecsSystem Spec
14 Jan 2014   #23
Lennardson

Windows 7 Home Premium 32bit
 
 

I haven't made any back ups, and yes I just pushed the power button
My System SpecsSystem Spec
.

14 Jan 2014   #24
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Lennardson View Post
I haven't made any back ups, and yes I just pushed the power button
Do #22
How...read here: System Restore OPTION TWO
My System SpecsSystem Spec
14 Jan 2014   #25
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Lennardson View Post
Completely black I go through the whole starting windows animation then plunged into black with just the mouse
So just before logon screen. Correct?
My System SpecsSystem Spec
14 Jan 2014   #26
Lennardson

Windows 7 Home Premium 32bit
 
 

When I click on system restore it says: 'no restore points have been created on you computer's system drive. To create a restore point open system protector.' When I open the link it says: 'the computer is running in limited diagnostic state. If you use system restore in this limited state you can't undo the restore operation'
My System SpecsSystem Spec
14 Jan 2014   #27
Lennardson

Windows 7 Home Premium 32bit
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Quote   Quote: Originally Posted by Lennardson View Post
Completely black I go through the whole starting windows animation then plunged into black with just the mouse
So just before logon screen. Correct?
Yes
My System SpecsSystem Spec
14 Jan 2014   #28
Lennardson

Windows 7 Home Premium 32bit
 
 

Sorry have to go and sleep now got work at 4 tomorrow, thanks for the help and sorry for causing you trouble.

My System SpecsSystem Spec
14 Jan 2014   #29
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Disks are fine. Startup repair thinks it boots fine... actually is booting without problems. Only you cannot logon. No image backups. No restore points.

Do you have a win7 system repair disc or win7 install DVD?
------------------
Does boot to safe mode work? Safe mode with command prompt?
My System SpecsSystem Spec
15 Jan 2014   #30
Lennardson

Windows 7 Home Premium 32bit
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Disks are fine. Startup repair thinks it boots fine... actually is booting without problems. Only you cannot logon. No image backups. No restore points.

Do you have a win7 system repair disc or win7 install DVD?
------------------
Does boot to safe mode work? Safe mode with command prompt?
My computer didn't come with any repair disks all pe-installed I guess, also none of the safe modes work
My System SpecsSystem Spec
Reply

 Win 7 can't boot but start-up repair can't detect anything




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows 7 will not boot, repair start up launch also doesn't work
Hello, I hope you guys can help me. I have A Dell Laptop with Windows 7. Today my laptop stopped working. When I try to turn it on normally, it will go to request to either launch the start up repair or to try booting it up normally again. When I try to launch the start up repair it will state...
Hardware & Devices
'Windows failed to start' message on boot, but nothing to repair?
I have an intermitant problem where I get 'Windows failed to start' with the options 1.Start windows normally 2.Launch system repair. If I select 1. It will run for well over an hour and give a 'cannot repair message' after which it boots normally anyway. If I select 2. It boots fine with no...
General Discussion
Only options: Start-up repair, Start normally. CD/USB boot no result.
Hey. My toshiba laptop was working fine yesterday. This morning when I turn it on I see start-up repair or start normally. I always make sure to use shut down so that screen shouldn't show but it did. I didn't install any new software/updates. So now I try normal, "Starting Windows" then...
Installation & Setup
Win 7 x86 can't boot up, startup repair could not detect problem.
My system crashed on my acer laptop - I wasn't doing anything out of the ordinary - It wouldn't boot back up. Would boot into safe mode so I did this & followed instructions to stop all other programs running other than microsoft, still wouldn't boot up - just hangs at the win7 logo screen. I tried...
BSOD Help and Support
windows won't start/can't do system repair/won't boot from CD
help please all... sony vaio PCG-71314L on turning on, hangs at "windows is starting" for ever F10 says "disc read error" F8 says "no operating system found" booting/repairing/reinstalling from CD hangs at "windows is loading" for ever what is wrong? how could i get it to...
General Discussion
My laptop won't boot and the start up repair it recommends fails
Hey, I'm posting this from my older computer but heres the problem My laptop can't load windows. After work today, I opened it up and logged in, it was in standby before i opened it. Soon AVG popped up and told me it needed to restart to finish an update. Of course, i allowed this. Then as it...
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App