Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win 7 can't boot but start-up repair can't detect anything

16 Jan 2014   #61
Lennardson

Windows 7 Home Premium 32bit
 
 

here is the file for C:




Attached Files
File Type: txt bcd_c.txt (3.5 KB, 6 views)
My System SpecsSystem Spec
.
16 Jan 2014   #62
Lennardson

Windows 7 Home Premium 32bit
 
 

I am not drunk and there wasn't any outputs at all I did C: again and got this
My System SpecsSystem Spec
16 Jan 2014   #63
Lennardson

Windows 7 Home Premium 32bit
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Are you drunk? Did you type this at all? those command give output, or error message!

Code:
Bcdedit/enum all 
Bcdedit/enum all /store e:\boot\bcd
ok yes if you take off the bit after the > it does display the command and it turns out that e: is my dvd drive i needed to do C:
My System SpecsSystem Spec
.

16 Jan 2014   #64
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Code:
Bcdedit/enum all /store D:\boot\bcd > c:\bcd_d.txt
Post c:\bcd_d.txt as well
My System SpecsSystem Spec
16 Jan 2014   #65
Lennardson

Windows 7 Home Premium 32bit
 
 

here you go


Attached Files
File Type: txt bcd_d.txt (3.5 KB, 3 views)
My System SpecsSystem Spec
16 Jan 2014   #66
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Lennardson View Post
here you go
It looks the same as bcd_c.txt. Sure you did the commands correct?
No info in output that I can use to force a recovery
My System SpecsSystem Spec
17 Jan 2014   #67
Lennardson

Windows 7 Home Premium 32bit
 
 

sorry I don't know what happened did the commands again and I think there are different:


Attached Files
File Type: txt bcd_c.txt (3.5 KB, 3 views)
File Type: txt bcd_d.txt (3.5 KB, 4 views)
My System SpecsSystem Spec
17 Jan 2014   #68
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Lennardson View Post
sorry I don't know what happened did the commands again and I think there are different:
I did a file compare.... they are exactly the same
My System SpecsSystem Spec
17 Jan 2014   #69
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Maybe this gives different output(?)
Code:
 
Bcdedit/enum all /store C:\boot\bcd > c:\bcd_c.txt
My System SpecsSystem Spec
17 Jan 2014   #70
Lennardson

Windows 7 Home Premium 32bit
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Quote   Quote: Originally Posted by Lennardson View Post
sorry I don't know what happened did the commands again and I think there are different:
I did a file compare.... they are exactly the same
thats weird because under boot loader the Identifier is different on both also the device so maybe its the website

there is more than one boot loader ignore this
My System SpecsSystem Spec
Reply

 Win 7 can't boot but start-up repair can't detect anything




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows 7 will not boot, repair start up launch also doesn't work
Hello, I hope you guys can help me. I have A Dell Laptop with Windows 7. Today my laptop stopped working. When I try to turn it on normally, it will go to request to either launch the start up repair or to try booting it up normally again. When I try to launch the start up repair it will state...
Hardware & Devices
'Windows failed to start' message on boot, but nothing to repair?
I have an intermitant problem where I get 'Windows failed to start' with the options 1.Start windows normally 2.Launch system repair. If I select 1. It will run for well over an hour and give a 'cannot repair message' after which it boots normally anyway. If I select 2. It boots fine with no...
General Discussion
Only options: Start-up repair, Start normally. CD/USB boot no result.
Hey. My toshiba laptop was working fine yesterday. This morning when I turn it on I see start-up repair or start normally. I always make sure to use shut down so that screen shouldn't show but it did. I didn't install any new software/updates. So now I try normal, "Starting Windows" then...
Installation & Setup
Win 7 x86 can't boot up, startup repair could not detect problem.
My system crashed on my acer laptop - I wasn't doing anything out of the ordinary - It wouldn't boot back up. Would boot into safe mode so I did this & followed instructions to stop all other programs running other than microsoft, still wouldn't boot up - just hangs at the win7 logo screen. I tried...
BSOD Help and Support
windows won't start/can't do system repair/won't boot from CD
help please all... sony vaio PCG-71314L on turning on, hangs at "windows is starting" for ever F10 says "disc read error" F8 says "no operating system found" booting/repairing/reinstalling from CD hangs at "windows is loading" for ever what is wrong? how could i get it to...
General Discussion
My laptop won't boot and the start up repair it recommends fails
Hey, I'm posting this from my older computer but heres the problem My laptop can't load windows. After work today, I opened it up and logged in, it was in standby before i opened it. Soon AVG popped up and told me it needed to restart to finish an update. Of course, i allowed this. Then as it...
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:07.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App