Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win 7 can't boot but start-up repair can't detect anything

17 Jan 2014   #71
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Windows 7 Home Premium 32bit SP1 included English: X17-58996.iso It's USA version. But that's no prblme for troubleshooting. Download and burn it. Source Windows 7 Direct Download Links

Burning can be done with Microsoft Store

We need a bootable install DVD for troubleshooting! Did you backup important files already?


My System SpecsSystem Spec
.
17 Jan 2014   #72
Lennardson

Windows 7 Home Premium 32bit
 
 

3rd time lucky


Attached Files
File Type: txt bcd_c.txt (2.7 KB, 1 views)
File Type: txt bcd_d.txt (3.5 KB, 1 views)
My System SpecsSystem Spec
17 Jan 2014   #73
Lennardson

Windows 7 Home Premium 32bit
 
 

don't have a blank cd to put it on might be able to get one later this week
My System SpecsSystem Spec
.

17 Jan 2014   #74
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Copy important stuff to external usb disk. I think we can't continue now. I want you to make/borrow a bootable win7 install dvd. We use it in case my tricks fail and you can't boot at all. At the moment you don't have anything at all!
My System SpecsSystem Spec
17 Jan 2014   #75
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

In command prompt:
Code:
diskpart
select disk 0
list part
exit
Tell me what partitions you see? Assume 3 then:
Code:
diskpart
select disk 0
select part 0
detail part
select part 1
detail part
select part 2
detail part
what are the sizes of the partitions?
My System SpecsSystem Spec
21 Jan 2014   #76
aravindh226

Windows 7
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
In command prompt:
Code:
diskpart
select disk 0
list part
exit
Tell me what partitions you see? Assume 3 then:
Code:
diskpart
select disk 0
select part 0
detail part
select part 1
detail part
select part 2
detail part
what are the sizes of the partitions?
I tried everything mentioned in the whole thread. I also tried cacls command earlier, but did not work out either.
I have 2 partitions. part 1 is Recovery with 10 GB, status Healthy. Part 2 is 287 GB with status Healthy. Please tell me how to proceed.
Im getting the black screen with cursor. I dont have a boot CD as of now, so I need to try that later. Im just trying to fix it wothout the boot CD if possible. Please help.
My System SpecsSystem Spec
Reply

 Win 7 can't boot but start-up repair can't detect anything




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows 7 will not boot, repair start up launch also doesn't work
Hello, I hope you guys can help me. I have A Dell Laptop with Windows 7. Today my laptop stopped working. When I try to turn it on normally, it will go to request to either launch the start up repair or to try booting it up normally again. When I try to launch the start up repair it will state...
Hardware & Devices
'Windows failed to start' message on boot, but nothing to repair?
I have an intermitant problem where I get 'Windows failed to start' with the options 1.Start windows normally 2.Launch system repair. If I select 1. It will run for well over an hour and give a 'cannot repair message' after which it boots normally anyway. If I select 2. It boots fine with no...
General Discussion
Only options: Start-up repair, Start normally. CD/USB boot no result.
Hey. My toshiba laptop was working fine yesterday. This morning when I turn it on I see start-up repair or start normally. I always make sure to use shut down so that screen shouldn't show but it did. I didn't install any new software/updates. So now I try normal, "Starting Windows" then...
Installation & Setup
Win 7 x86 can't boot up, startup repair could not detect problem.
My system crashed on my acer laptop - I wasn't doing anything out of the ordinary - It wouldn't boot back up. Would boot into safe mode so I did this & followed instructions to stop all other programs running other than microsoft, still wouldn't boot up - just hangs at the win7 logo screen. I tried...
BSOD Help and Support
windows won't start/can't do system repair/won't boot from CD
help please all... sony vaio PCG-71314L on turning on, hangs at "windows is starting" for ever F10 says "disc read error" F8 says "no operating system found" booting/repairing/reinstalling from CD hangs at "windows is loading" for ever what is wrong? how could i get it to...
General Discussion
My laptop won't boot and the start up repair it recommends fails
Hey, I'm posting this from my older computer but heres the problem My laptop can't load windows. After work today, I opened it up and logged in, it was in standby before i opened it. Soon AVG popped up and told me it needed to restart to finish an update. Of course, i allowed this. Then as it...
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:36.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App