Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Macrium reflect & CRC Error

16 Feb 2014   #11
Sven1458

windows 7 ultimate x64
 
 

My computer is 8 month old and I will keep an eye on it.

Sven


My System SpecsSystem Spec
.
16 Feb 2014   #12
Sven1458

windows 7 ultimate x64
 
 

All is well again the backup worked
Thanks for your help

Sven
My System SpecsSystem Spec
16 Feb 2014   #13
richc46

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install
 
 

You are very welcome. Glad that we could solve your problem.
My System SpecsSystem Spec
.

16 Feb 2014   #14
richc46

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install
 
 

I want to give you one last piece of information. The way that chkdsk works is that it moves the bad clusters, so they are no longer used. Chkdsk can only move so many clusters. If your hard drive begin to have the problem on a constant basis, after a while the procedure will no longer work. At that point I would get a new hard drive, regardless of age.
My System SpecsSystem Spec
16 Feb 2014   #15
Sven1458

windows 7 ultimate x64
 
 

Thanks,
That is exactly what I mean when I said I keep an eye on it
Thanks Again
Sven
My System SpecsSystem Spec
17 Feb 2014   #16
mjf

Windows 7x64 Home Premium SP1
 
 

You can use
Download Center - Crystal Dew World
to keep an eye on reallocated sector count. If it climbs even over just a few months I'd dump the drive.
I use the portable version with no OpendCandy.
My System SpecsSystem Spec
17 Feb 2014   #17
Sven1458

windows 7 ultimate x64
 
 

mjf,
thanks for the link. I will check it out

Sven
My System SpecsSystem Spec
17 Feb 2014   #18
Sven1458

windows 7 ultimate x64
 
 

I downloaded crystal disk info and ran the program. I attach 2 screen shots and the only difference between HD 0 and HD 1 is in C5 and C6 The raw value has a 1 at the end, and it is yellow. Any comments on what that means?

Thanks
Sven


Attached Thumbnails
Macrium reflect & CRC Error-1.jpg   Macrium reflect & CRC Error-3.jpg  
My System SpecsSystem Spec
17 Feb 2014   #19
richc46

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install
 
 

Your report is very close to mine. Caution is the important notation. Your Hard Drive may be a problem in the future. I would RMA, since it is new. Try for a replacement while it is still under warranty
Uncorrectable sector count is important. You probably shut down incorrectly etc and there is permanent damge which cannot be repaired, using the method that I gave you.
My System SpecsSystem Spec
17 Feb 2014   #20
Sven1458

windows 7 ultimate x64
 
 

Thanks
I will run the program once in a while and compare it to todays resuls

Sven
My System SpecsSystem Spec
Reply

 Macrium reflect & CRC Error




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Macrium Reflect error BEX64 (Win error?) on MR startup
I'm having same problem, but this solution didn't work for me. VSS is autostart and running. I've been running Macrium Reflect (free) for months on this system with no problem, but seem to remember it updated a few days ago. Any other ideas? BTW, I notice this thread is marked...
Backup and Restore
Macrium Reflect error BEX64 (Win error?) on MR startup
After installing win7 64bit home premium I cannot rum Macrium Reflect (free). On startup of MR I get this msg: Problem signature: Problem Event Name: BEX64 Application Name: Reflect.exe Application Version: 5.3.7109.0 Application Timestamp: 53ccfa37 Fault Module Name:...
Backup and Restore
BSOD; Macrium Reflect backup, error 0x00000019
So I was running Macrium Reflect after I did a clean install of Windows 7 Ultimate on my friends laptop and I got a BSOD BAD_POOL_HEADER. A few weeks ago, on my grandmas laptop it got a BSOD BAD_POOL_CALLER. Is this in error in Intel systems because both are Intel and both have had an issue...
BSOD Help and Support
Macrium reflect usb booting error
I tried with my usb drive.It came as follows.I couldnot take screen shots so i'm explaining the steps dat came in the blue screen wizard.Pls help me. Wen i opened ithe rescue.iso during booting from pendrive,a window opened As 1.Restore Wizard V5.0.4286. 2.Press next to continue.I pressed...
Backup and Restore
Macrium Reflect
Dell computer with Intel Celeron cpu, 2.0 GHz and 3.0 gb memory. Prior to installing Windows 7 Pro I had Vista Home Premium (came preinstalled on the pc, and had not be partitioned). I had made the rescue disks was prepared to restore to factory conditions. I even had Macrium Reflect image. ...
Backup and Restore
Macrium Reflect
I have made a query on this before but my memory is getting very short these days. Its regarding the Macrium Reflect software. I accidently deleted a section of Microsoft Office OneNote and I want to restore it from the backup file using copy paste. I go into the drive where my backups are...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:00.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App