Macrium BU User needs advice

Page 1 of 2 12 LastLast

  1. Posts : 20
    Microsoft Windows 7 Ultimate 32-bit
       #1

    Macrium BU User needs advice


    I have used Macrim BU on my external Hard Disk (G) for several years. I used to keep two copies of the BU, a fresh one and the previous one which I would delete. Over the years I have used up the availablae spece somehow.

    External HARD Drive; G (Macrium BU) & J
    What I backed up was Disk D operating system with XP Partition. Disk C with W7 and Partition F with my data
    I would like to change the Macruim to backup just C and F.

    I don't really know if I can just delete what is on G and start over or if there is something else taking up so much space. Any advice appreciated.

    Perhaps I should reinstall Macrium?
    I am not up to par on compers.
    Attached Thumbnails Attached Thumbnails Macrium BU User needs advice-w7-computer-pg..jpg   Macrium BU User needs advice-w7-macrium-bu-properties-g-upload..jpg   Macrium BU User needs advice-w7-macrium-bu-used-space-g..jpg  
      My Computer


  2. Posts : 12,012
    Windows 7 Home Premium SP1, 64-bit
       #2

    Macrium image files have an mrimg extension. How many files do you have on the G drive with that extension?

    Your pictures above show just one: it's 161 GB in size and is dated April 2, 2014. But there is no indication whether it is a backup of C, D, or F. Or all 3?

    I assume you have others?

    It's tough to evaluate your situation without knowing how many mrimg files you have. The G drive is about 900 GB. Should it have anything on it other than Macrium backups?

    If I were you, I would start over and do this:

    Delete all but the most recent Macrium image file.

    That should free up hundreds of GB of space on G.

    Then re-evaluate.

    Have you been backing up images of C, D, and F into a single image file? Or do you make separate images of each partition?

    I would probably make separate images of each rather than combining them. Put them in folders named like "C image 051914" so you can keep track of them by date.

    An image of C should take up about 25 GB. An image of F should take up about 50 or 60 GB. Around 80 GB for both. So you should be able to keep several images of both C and F on a 900 GB drive.

    Do you have a small "system reserved" partition? You need to back it up also.
      My Computer


  3. Posts : 20
    Microsoft Windows 7 Ultimate 32-bit
    Thread Starter
       #3

    Hi, Macrium image files have an mrimg extension. How many files do you have on the G drive with that extension?

    It is Disk 1, partition C, partition D (XP) and partition F (data)
    I have one copy on Disk 4 G, no others. The only other thing I have on G is Windows Image Backup 128GB, 13 April 2014.

    I do not understand why the 161 GB from Macrium and the 128 GB from the WIBU show as using almost all of Disk G.?

    I know I am confused on how Macrium works. What do you do with the XML DEFINITION FILES? They say MyBackup and there are 9 on the list.
    Attached Thumbnails Attached Thumbnails Macrium BU User needs advice-w7-macrim-page..jpg   Macrium BU User needs advice-w7-disk-g..jpg  
      My Computer


  4. Posts : 12,012
    Windows 7 Home Premium SP1, 64-bit
       #4

    The last picture you posted includes a folder called "Patti-PC".

    How large is that folder and what is its purpose?

    Have you burned a Macrium recovery disk and have you confirmed that it will boot your PC?

    Post a screen shot of Windows Disk Management.
    Last edited by ignatzatsonic; 20 May 2014 at 14:15.
      My Computer


  5. Posts : 20
    Microsoft Windows 7 Ultimate 32-bit
    Thread Starter
       #5

    ignatzatsonic said:
    The last picture you posted includes a folder called "Patti-PC".

    How large is that folder and what is its purpose? See the snap shot. It is part of Windows Image Backup
    (missed the snap shop but it has 537 GB on it even though this properties snap shot shows 128 GB.)

    Have you burned a Macrium recovery disk and have you confirmed that it will boot your PC? I burned a recovery disk 18-08-12nand it worked ok with W7 at that time.

    Post a screen shot of Windows Disk Management.
    Ok.
    Attached Thumbnails Attached Thumbnails Macrium BU User needs advice-w7-macrium-disk-management..jpg   Macrium BU User needs advice-windowsimagebackup-properties..jpg  
      My Computer


  6. Posts : 12,012
    Windows 7 Home Premium SP1, 64-bit
       #6

    Do you intend to keep Windows XP on this PC—the D partition? You say you no longer want to back it up.

    What is the purpose of J partition?

    Is this a home-built PC or is it a major brand such as Dell, HP, etc. I’m wondering why I don’t see a “system reserved” partition?

    Did you do the original installation of XP and Windows 7 on this PC?

    Are you willing or unwilling to give up on Windows Backup, which appears to be using at least 537 GB on G, possibly over 600 GB? I’m wondering why you are using it and Macrium both, rather than one or the other.
      My Computer


  7. Posts : 20
    Microsoft Windows 7 Ultimate 32-bit
    Thread Starter
       #7

    Do you intend to keep Windows XP on this PC—the D partition? You say you no longer want to back it up.
    I am writing a book and I have one program that scans and translates Norwegian and that program will only run on XP. When book is finished I want to delete XP.


    What is the purpose of J partition?
    J is for old stuff I am getting rid of. Just an extra partition on External Hard Drive.

    Is this a home-built PC or is it a major brand such as Dell, HP, etc. I’m wondering why I don’t see a “system reserved” partition?
    This is a home build desk top (a friend built it)

    Did you do the original installation of XP and Windows 7 on this PC?
    Yes

    Are you willing or unwilling to give up on Windows Backup, which appears to be using at least 537 GB on G, possibly over 600 GB? I’m wondering why you are using it and Macrium both, rather than one or the other.

    I am very willing to give up Windows BU. Before I got this computer I had a disastrous crash on my old one and lost a lot of material I needed. Since them I have been paranoid about losing data & my book, hence all the partitions and BU's.
    I am not very proficient with computers - need step by step instruction for anything new. I never really understood Macrium and was afraid it would not work if I got infected or crashed. I read a computer Magazine and try to keep my machine up to date but feel I don't have confidence.
      My Computer


  8. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #8

    Hi Patti, here's a couple of guides which should be helpful with using Macrium Reflect.

    Imaging with free Macrium

    MACRIUM REFLECT - Create Bootable Rescue USB Drive

    It's much more configurable than Windows back up and takes less space too.
      My Computer


  9. Posts : 12,012
    Windows 7 Home Premium SP1, 64-bit
       #9

    Read those links Britton supplied---they are quite detailed.

    I would not use XML files as they apparently just confuse you. When you want to make an image, just start Macrium and walk through its steps for each partition (C and F) separately—maybe 8 or 10 mouse clicks. Just ignore the XML choices.

    Here is what I would do. You get to decide if it makes sense for you.

    1: Confirm that the recovery disk you made 2 years ago will boot your PC today.

    2: Let us know whether it boots into a Macrium interface or into a slower Linux-based interface.

    Don’t go any farther until 1 and 2 are done. I’d seriously consider making a new recovery disk, even if the current one boots the PC.

    3: Give up on Windows Backup and delete those files from G.

    4: Make 2 folders on G. One called “Macrium image of C, 052314”. The other called “Macrium image of F, 052314”. Adjust the date as needed.

    5: Make a new Macrium image of C and store it in the “Macrium image of C, 052314” folder. Make a new image of F and store it in “Macrium image of F, 052314”.

    6: Periodically, make new folders with the current date and make new images, storing them in the new folders. Maybe keep the last 2 images for each partition. Those 2 images combined should probably total less than 150. So you could store 2 of each on maybe 300 GB.

    Additional comments:

    Your use of separate partitions doesn’t give you any additional protection. It’s a good idea to keep Windows and data on separate partitions, but beyond that the advantages are dubious. You may as well just use a folder structure. Partitioning can be inefficient as you can never tell in advance how fast your data will grow and you can run out of space—as you have with G. If you did not have that unused 77 GB on J, it could be utilized by G. As it is, that 77 GB is not usable to store your images. The Macrium images will occupy only a relatively small percentage of G, so you needn’t do anything about this partitioning issue now. I just mention it for future reference.

    You say you are paranoid about losing data. Therefore, I would also consider using something OTHER than Macrium to back up data (as opposed to Windows), such as an ordinary “file by file” backup program. There are several free versions that work well. The advantage is that your personal data is presumably very important to you as a writer, but imaging is an imperfect technology. It is possible that Macrium (as good as it is) or any other imaging program will fail at a critical time and that could mean your data backups are inaccessible.

    “File by file” backups don’t have this added complication of imaging. You can ponder that and ask more questions in another thread as you see fit. Another advantage is that file by file backups can be configured to run with a single mouse click and usually take no more than a minute or two to complete, so you can do them daily or even hourly with little effort.
      My Computer


  10. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #10

    What I do is keep all images on separate physical drives. The XML isn't needed as Ignatz said, Macrium will do restores without them. The XML method is like a shortcut to the operations. :)
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 18:10.
Find Us