Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Problems after restoring a Windows 7 system image

29 Jan 2015   #1
charlesactuary

Windows 7 Home Premium 64 bit
 
 
Problems after restoring a Windows 7 system image

I'd appreciate some advice please. I'm finding problems after installing a new hard disk on my Dell desktop PC and transferring everything from the old disk using Windows' system image creation capability. My question is, are there any ways I can confidently fix the problems that I am having with the new set up, or should I give up trying and so a clean installation of Windows?

Background

For some time there has been a fairly minor issue with my system, which usually worked but occasionally crashed, turning off without warning as if someone had pulled out the power cord and then immediately rebooting. This was happening fairly infrequently, perhaps every week or two. In addition, even less frequently, the system would set off a CHKDSK on booting up. Apart from this, there didn't appear to be any problems. As far as I could see, all my software was running as it should be.

I ran a diagnostic test on Dell's website, which said that the disk was in danger of failing and should be replaced. So I bought a replacement from Dell, the same size and specification to the original disk, but now made by Seagate instead of Western Digital.

To avoid having to reinstall Windows and all my programs, I tried to clone the old disk onto the new one, using Macrium Reflect Free and then EaseUS Todo Backup Free. Both of these failed each time I tried. Reflect came up with a Read error caused by a "broken pipe". I tried both its "intelligent" and sector by sector methods of cloning. EaseUS also failed (after trying for a few hours!); I forget the exact error.

So finally, I decided to try Windows' own facilities, creating a system image from the old disk onto an external hard drive, and then restoring back onto the new one. This completed, apparently successfully.

However, over the last two days, I have spotted a few things which suggest that all is not right.
  • Windows Update will not run because "the service is not running" - using Windows Update Troubleshooter has not fixed the problem, with Windows Update Error 0x80070057;
  • The MS Office programs are unable to load Help;
  • On my genealogy program, some of the settings have changed to a non-standard version, and the system will not allow me to change them back.

These are the ones I have discovered over the last two days. I expect that others will emerge over time.

So, as I said at the start, are there any good ways to sort out my problems, or should I cut my losses and reinstall Windows from scratch?


My System SpecsSystem Spec
.
29 Jan 2015   #2
mjf

Windows 7x64 Home Premium SP1
 
 

Quote   Quote: Originally Posted by charlesactuary View Post
I ran a diagnostic test on Dell's website, which said that the disk was in danger of failing and should be replaced. So I bought a replacement from Dell, the same size and specification to the original disk, but now made by Seagate instead of Western Digital.
Making an image of a potentially damaged HDD may be rolling over a problem. If you don't have a clean older system image I'd be tempted to backup all your data and do a clean install assuming you have the disks to do this. Once all your software is reinstalled I'd make and keep the clean install system image. If you then keep routine system images, deleting some when you think you're getting too many, you will never need to worry about this again. I keep both Windows inbuilt and (free) Macrium images. If I was going for one imaging program I'd pick Macrium but make sure you have a working rescue pe CD or USB.

Also, if you need replacement or additional internal HDDs you shouldn't need to go through Dell unless it's a warranty claim.

Other members may have some other suggestions.
My System SpecsSystem Spec
30 Jan 2015   #3
charlesactuary

Windows 7 Home Premium 64 bit
 
 

Thanks mjf, I was afraid that would be what you said. Oh well, that will give me something to do for the weekend.

All the best, Charles
My System SpecsSystem Spec
.

Reply

 Problems after restoring a Windows 7 system image




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows 7 restoring from system image
Dear experts, Few days ago my laptop started to act strange. When I checked HDD, I got notification that I have to do backup, and replace drive. My question is: Do I have to install Windows 7 on new hard drive and then restore system image, or do I have to use some software for that purpose?...
Backup and Restore
Restoring windows, System image backup?
Hi so I recently got a SSD for my comp, before installing I did a backup of windows and included the system image option. I am now on a fresh install of windows but can only restore the files I had on my old windows and not the entirety of windows (programs, program settings.. ect). How can I use...
Backup and Restore
restoring system image to a new SSD
This is a follow-on from the previous question that you kindly helped me with... So far.... 1. I have a system image saved on a External USB HDD 2. I am able to boot successly with the recovery disk I downloaded. 3. Windows successfully finds the image I made 4. When I try to restore the...
Backup and Restore
Restoring an XP image to my new Windows 7 system
Hello, I am trying to do something very similar, but not quite exactly the same as here. I hope that there might be someone here that has some tips that would be useful to what I am trying to acheive. I just got a new system running Windows 7. I bought the "professional" version of Windows...
Installation & Setup
Restoring Windows Backup System Image & Cluster Size
Hello all, I'm going to attempt to create a System Image for the first time with Windows Backup so when I need to reformat I can have the image handy. My question is this, I'm using 64kb cluster-size on my install drive. Will using the System Tools disc to restore the System Image correctly...
Backup and Restore
Restoring files from a Vista system image in Windows 7
I had to wipe and reinstall my system over the weekend, and I had created a Windows Vista image a few weeks back. I decided to run the Windows 7 RC 1 - 64 bit on my system. It's installed perfectly and it's running really well. However, I want to restore my docs and pictures from my 'Vista...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:01.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App