Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: image restore 0x80042302

11 Mar 2015   #1
prk1212

windows 7 professional 64 bit
 
 
image restore 0x80042302

Trying to do image restore to blank hard drive but I keep getting message a volume shadow copy service component encounted an unexpected error check the application event log for more information (0x80042302).THe computer is a hp 6530b, I was running windows 7 pro. I have try just about everything I found on the internet. I do not have a install disk as I got this on the internet a couple of years ago.I created a recovery and image disk as soon as I got the system. I do not run anything of importance so I was not worrying about what it restore to. My old hard drive crashed so I was unable to recover anything. Any help anyone can give I am willing to try. Thank ahead of time.


My System SpecsSystem Spec
.
12 Mar 2015   #2
Irene

Windows 7 Home Premium 64bit
 
 

Perhaps something here will help:
0x80042302 on system restore.. - Microsoft Community

Quote:
Check whether Volume Shadow Copy Service, System Restore Service is started and Set to Automatic

1. Type Services.msc in Start Menu search box, hit Enter.
2. Make sure that the Volume Shadow Copy Service is Running and set on Automatic.
3. If the Status of System Restore Service is not Started, Start it. Also set it on Automatic if it is not.
4. restart your computer.
Now try to do a system restore.
You may also download the Norton removal tool and completely remove all the components of Norton. Check if that helps.
Check how the computer works in safe mode.
Start your computer in safe mode - Windows Help
If the computer works fine in safe mode, then do a clean boot.
Refer this KB article:
How to perform a clean boot in Windows
Also, run System File Checker tool (SFC.exe) to make sure system files are intact and to replace the file. Follow these steps:
1. Click Start, and then type cmd in the Start Search box.
2. Right-click cmd in the Programs list, and then click Run as administrator.
If you are prompted for an administrator password or confirmation, type your password or click Continue
3. At the command prompt, the following line, and then press ENTER:
sfc /scannow
Use the System File Checker tool to repair missing or corrupted system files
My System SpecsSystem Spec
12 Mar 2015   #3
prk1212

windows 7 professional 64 bit
 
 

thank for the reply but as I stated I am trying to do a image restore to a blank drive, so I am unable to check any of the suggested items, as least I do not know how if I have no system to load and do my image restore.
My System SpecsSystem Spec
.

13 Mar 2015   #4
Irene

Windows 7 Home Premium 64bit
 
 

Sorry it didn't help. Hopefully another member will have some suggestions for you.
My System SpecsSystem Spec
13 Mar 2015   #5
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

I'm guessing you are using the built in Windows Imaging...
If you are using a different program such as Macrium, post that info, there would be different instructions.

See if this tutorial by Brink helps for the W7 built in utility:
System Image Recovery
My System SpecsSystem Spec
13 Mar 2015   #6
prk1212

windows 7 professional 64 bit
 
 
0x8042302

I created my image disk using window 7 recovery, there are 3 image dvd disks and the bootable repair disk. I have tried bootable repair disks that I made using Aomei,,paragon with the same result of course I do not have image disks by those programs only windows 7 that I created when I got the laptop (HP 6530b). I have tried to load the image disks onto a difference system running win 7 and win 10 with smaller and larger hard drives than I had in my laptop. Last night I loader a friend win 7 installation disk but still could not run the image disks. I have tried to image to a blank drive, one with win 7, one with win 10 all to equal, larger, and smaller disks. The equal size was on the original lap top, the others on a desktop. I do not have a win 7 install disk for my laptop as I got it over the internet. I have printed Brinks instructions but I do not know when I will try it as I have loaded win 10 on my system but will try them on another system that I have a blank drive on. I will try anything anyone suggests as Microsoft will probably want a product key when they release the final win 10. I thank you and everyone for any suggestions.
My System SpecsSystem Spec
Reply

 image restore 0x80042302




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
0x80042302 on system restore..
I am having some problems with my laptop Windows 7 Home Premium pc. It has been working fine until one day after school I open my laptop and soon as I type in my password the brightness of the screen goes down ( turns dark. ) and im trying to make it bright by pressing on the brightness button on...
General Discussion
How to restore windows 7 image created in EFI to restore in UEFI mode
Hello, first let me introduce myself, I am new to Seven forums, I am an expert in Windows OSes...... Now lets get to the question, I want to change my hard disk's partition table to GPT (its currently in MBR partition table) for that i created a system image of my windows 7, its currently booting...
Backup and Restore
Cannot create system restore point (0x80042302)
Been trying for about 3 days to create a restore point but the same message keeps popping up. "A volume shadow copy service component encountered an unexpected error. Check the application even log for more information." I currently have no access to Internet on my laptop and Windows 7...
Backup and Restore
Trying to make a restore image partition with restore program
I have been trying to do this for the past 3 days, I have a Toshiba laptop that a few years ago the hdd died on taking my restore disks with it, now a friend of mine wants it but I want to remake the restore partition along with the image of a fully installed windows os with drivers and preloaded...
Backup and Restore
Factory Restore not working, error 0xe0ef000d, Image Restore?
Hello people. I'm new to this so please bear with me. Okay so I'll give a brief explanation of what's going on. So a couple of years ago I gave my old computer(HP Pavillion p2 Series /with Windows 7 home) to my younger siblings, because I moved and got a new computer for school. I put a secure...
Backup and Restore
0x80042302 System Image Restore Failed
So Gateway put a new HD in my laptop and sent it with working Win 7 HP. If I make a new System Image Backup to the same USB HDD, it restores fine. But when I try to restore the image I WANT, with all my programs installed, etc, it fails. Both images are on the same USB drive and Restore Center...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:08.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App