Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Macrium Reflect FREE question

24 May 2015   #1
abuela101

Windows 7 Home Premium 64bit
 
 
Macrium Reflect FREE question

Fairly new to this software and have a question regarding it.

There are 2 selections available and those are:

1: Image selected disk on this computer.
2: Create an image of the partitions required to backup and restore windows.

I tried both 1 and 2.

1: showed 32.7 GB after imaging.
2: showed 29.0 GB after imaging.

What is the difference? What is #1 including what #2 is not including?

Which one is recommended to use to restore all what I need to restore Windows, including the software I installed?

TIA


My System SpecsSystem Spec
.
24 May 2015   #2
ignatzatsonic

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium SP1, 64-bit
 
 

Post a screen shot of Windows Disk Management.

You presumably have multiple partitions--maybe as many as 3. We need to know what's in them and that would be shown by the screen shot.

Choice 1 would appear to include a partition that is NOT needed to restore Windows. Choice 2 would likely be C only or possibly C plus another partition that happens to be marked as "system"---which the screen shot will reveal.

To restore Windows, you need to restore C and any separate partition marked as "system". On some PCs, C is "system", so that's all you'd have to restore. On others, it isn't--so you'd have to restore 2 partitions in that case. Macrium is smart enough to tell which partitions are needed--that's what is meant by "Create an image of the partitions required to backup and restore windows."

Unless you did something cuckoo, your software should be on C and would be included in both choice 1 or choice 2.
My System SpecsSystem Spec
24 May 2015   #3
whs
Microsoft MVP

Vista, Windows7, Mint Mate, Zorin, Windows 8
 
 

Why don't you mount the images and see where the difference is.
My System SpecsSystem Spec
.

24 May 2015   #4
abuela101

Windows 7 Home Premium 64bit
 
 

Thanks ignatzatsonic for the info. Here is the pic. Hopefully it's the one you wanted so see. EDIT: The blue square you see under volume is shown as blank.
My System SpecsSystem Spec
24 May 2015   #5
abuela101

Windows 7 Home Premium 64bit
 
 

@whs. I don't know how to do that because I'm a complete (senior) noob and goes way above my paygrade. Thanks anyway.
My System SpecsSystem Spec
24 May 2015   #6
Lady Fitzgerald

Win 7 Ultimate 64 bit
 
 

The difference is the Recovery partition isn't being included in the image of the partitions required to backup and restore windows. The Recovery partition is used to restore your computer back to the factory state should things get hopelessly fouled up. While most purists would say to image that partition separately from the System partitions and even move it to another drive, for you it would be much simpler to just image the entire C: drive, same as you did in Option 1. That way, you will have to make only the one image and it isn't all that much bigger than just imaging the other two.
My System SpecsSystem Spec
24 May 2015   #7
ignatzatsonic

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium SP1, 64-bit
 
 

The recovery partition is marked "system". That's where your boot files are. That partition is needed to restore Windows for that reason, along with C.

This is a Dell. Dell has some weird ideas about where to put boot files. They choose to put them on the recovery partition, unlike most builders.

You could copy those boot files to C if you wanted, and then would only have to image C to restore Windows and programs.

Or leave things as they are and make a single image file of C and recovery.

Or leave things as they are and make separate image files of C and recovery.

Or leave things as they are and make a single image of C, recovery, and that partition with no letter.

Or leave things as they are and make separate images of C, recovery, and that partition with no letter.

I'm not sure what that unlettered partition is. Hmmm...no file system on it. Ask Dell.

Simplest thing to do is just make one image file of all of them, like Lady Fitzgerald recommended. Then you don't have to worry about it.
My System SpecsSystem Spec
24 May 2015   #8
abuela101

Windows 7 Home Premium 64bit
 
 

@Lady Fitzgerald and ignatzatsonic. Thank you both so very much to give clarity to my question and therefore will continue to use #1 to make sure the image will have everything it needs in case a restore with Macrium needs to be done.

Since there is a 13.15 GB on Recovery I got confused because Macrium showed a difference of 3.7 GB between #1 and #2 which doesn't correspond with the 13.15 GB Recovery although Macrium compresses the info. So it's Dell that puts the stuff in there.

Signed, a grateful abuela101
My System SpecsSystem Spec
24 May 2015   #9
whs
Microsoft MVP

Vista, Windows7, Mint Mate, Zorin, Windows 8
 
 

1. To mount Macrium image, you only need to double click on the image file

2. This is a typical Dell setup with the recovery partition as the active partition. For boot purposed that recovery partition needs to be included into the image.

3. If you want to ignore the recovery partition, you can copy the bootmgr to the C partition. Here is how.
My System SpecsSystem Spec
24 May 2015   #10
whs
Microsoft MVP

Vista, Windows7, Mint Mate, Zorin, Windows 8
 
 

Quote:
Since there is a 13.15 GB on Recovery I got confused because Macrium showed a difference of 3.7 GB between #1 and #2 which doesn't correspond with the 13.15 GB Recovery although Macrium compresses the info.
It is not the size of the recovery partition that determines the size of the image but the amount of data in that partition. Unfortunately you have posted an incomplete picture of your disk management which does not show how much space is actually being used.

This is how a snip of the complete disk management would look like.


Attached Thumbnails
Macrium Reflect FREE question-2015-05-25_0040.png  
My System SpecsSystem Spec
Reply

 Macrium Reflect FREE question




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Macrium reflect free features?
Referring to the Feature comparison chart at: Macrium Reflect Free 1) "File and folder backup" is not available in Macrium reflect free? Then what do you use Macrium free for? 2) Does Macrium reflect free have incremental and differential backup? What are these called in Macrium? (I am...
Backup and Restore
Macrium Reflect Free ...I'm in :-)
Sorry, it's me again! I started my Macrium imaging experience today with the Tecra R840 laptop (Win7 Pro 64-bit). 1- After installation, I created the Rescue disc with sucess :) (I already had the 1.7 GB WAIK stored in one of my USB 3.0 external hdd, so it was done in a breeze. But...I...
Backup and Restore
<ASK> Macrium Reflect FREE backup to Ext HDD fat32
Hello everyone... my name is kungfupanda7 from indonesia... i have a simple question to ask.... is anyone here using Macrium (free)...? I just did a macrium disk image backup to my fat32 external HDD
Backup and Restore
Can I use Macrium Reflect free to clone my laptop?
Not sure if I can do this or not but hopefully someone will know. At the moment I have two Sony Vaio laptops. My old one has an 80 GB hard drive partitioned as a C and D drive and has Windows XP. My new one has a 320 GB hard drive in one partition C running Windows 7 64 bit. I have several...
Backup and Restore
Macrium Reflect (free version)
I am trying to restore a backup image of my C: partition which is on an external drive. When I use the macrium boot cd it asks me to select the image file, but does not list the external drive the image in on. My setup has two external drives H: and M: my image is on M and only H: is listed. I...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:31.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App