Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 0x80070017 cyclic redundancy check error after I/O device error

12 Aug 2015   #1
pervigilis

Windows 7 Professional 64bit
 
 
0x80070017 cyclic redundancy check error after I/O device error

I have a Fujitsu Siemens Amilo Pi 2515 running Windows 7 Pro 32 bit with an Intel Core Duo T5450 @1.67 GHz with 2 GB of RAM. This is a second computer, not the one registered in my profile.

I was hoping to take the Windows 10 upgrade but I will not do this before backing up the computer with a system image. I first tried to back it up to a Seagate 2 Tb Expansion Desktop drive which is pretty new and i have successfully created a system image on it for my other computer using Acronis True Image 2015.

I only have the 1 computer license for Acronis and I don't particularly want to get another for this machine. Windows Backup should work. When I first tried to cack up to the 2Tb drive I got the error "the request could not be performed because of a I/O device error. I tried twice. Each time the backup runs through to completion but finishes with this error.

I have another smaller Seagate 500 GB external drive, so I tried to run the backup to it. This backup also ran to conclusion then dumped the 0x80070017 CRC error.

I have read other threads with this error but, having just had help with a different problem on my Acer 4810T (being a problem with Windows not genuine messages) where I was advised to submit a new thread rather than act on suggestions in other threads, I thought I should do that with this problem.

Despite the I/O error, there are backup files on the Seagate 2TB drive in 148 zipped folders taking up 25.8 GB of space. There is 62.9 GB used on C: drive out of 91.4 capacity. The D: drive has nothing on it it though it shows 102 MB used out of 45.7 GB capacity.

Despite the CRC error, the 500 GB Seagate drive also has 2 VHD files in a backup folder representing the C and D drives content @ 67,701,062 KB and 110,713 KB respectively

In each case, after the backups finish, the backup program keeps saying try to run it again.

Advice would be much appreciated.

pervigilis


My System SpecsSystem Spec
.
13 Aug 2015   #2
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

The I/O error could pertain to the C: drive itself, it may not necessarily be the external HDD that's throwing up that error. You could try the alternative of creating an image with Macrium Reflect linked in my signature to see if that works.
My System SpecsSystem Spec
13 Aug 2015   #3
pervigilis

Windows 7 Professional 64bit
 
 

I'm going to be away for a few days and I may not get back to this till early next week. Thanks for the suggestion though, Boozad.

I am downloading the free trial version now but don't think I have time to run it. Will see.

It just annoys me that the Microsoft backup system always seems to have problems. That is why I bought Acronis for my other laptop at the suggestion of another 7 guru.

pervigilis
My System SpecsSystem Spec
.

18 Aug 2015   #4
pervigilis

Windows 7 Professional 64bit
 
 

Hi Boozad

Yesterday, when back looking at the problem in this thread, I decided to run chkdsk on my C: and D: drives before taking any other action. I should have done this before asking my question, sorry. After a couple or three hours running these checks, I retried Windows backup and successfully created a system image. I already had created a Win 7 32 bit recovery disc so all good now and no immediate requirement to set up Macrium.

thanks - I'll close this thread now.
pervigilis
My System SpecsSystem Spec
18 Aug 2015   #5
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Glad to hear you got your issue sorted.
My System SpecsSystem Spec
Reply

 0x80070017 cyclic redundancy check error after I/O device error




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Cyclic Redundancy Check Error!
Hi, I have a WD 500 GB external drive, ive been using this as my back-up for about 2 years. It was just recently, when i open my files and folders, and error pops-up "Cyclic Redundancy Check". I tried to reformat the drive but it says that it is being used by another program, it assigned a drive...
Hardware & Devices
Data error cyclic redundancy check ssd
Hi, Windows 7 doesn't recognize my SSD drive. When I go to disk management, it shows a message to initialize it (image no.1) but when I press OK to do that, one another message appears and says: Data error cyclic redundancy check (image no.2). My computer windows doesn't show that drive and also...
Hardware & Devices
DiskPart Error "Data Error (cyclic redundancy check)"
Im trying to do a clean install of Win7. Im installing it through usb i have already deleted the hard drive using Darik's Boot And Nuke.When i try to create a partition from the command prompt it gives me an error DiskPart Error "Data Error (cyclic redundancy check)" see the system event log for...
Installation & Setup
Error copying file: Data error (cyclic redundancy check). CRC Scan ?
Edit: Think my hard drive may be failing and was the cause of my file synchronizing crash. I use it mostly to stream music and video and access the hard drive a lot. Any advice thanks HDDStatus - Tool to check hard disk status, health and reliability Hey, I've been using GoodSync for the...
Backup and Restore
Cyclic Redundancy check error error_crc
I own two identical laptops. Both started having the same problem two days ago. Model is CQ61-410US Notebook from Compaq. Running Windows 7 Home Premium. 64-bit operating system. I started getting a cyclic redundancy check error (error_crc error per MS Windows). The error occurs when I attempt to...
Network & Sharing
Data Error Cyclic Redundancy Check
please help me.. my system show "Data Error<Cyclic Redundancy Check>":shock:
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:06.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App