Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Image restore query!

01 Nov 2016   #1
Alexey2912

W7 Pro 32bit
 
 
Image restore query!

Hi,

While restoring an image, the restoration stalls after verification for at least 5 mins...

SSD target detected... Attempting Trim.

Though SSD trim is checked... Any ideas.

Never happened with earlier version, seen with version 6.2.1549.

Thanks.


My System SpecsSystem Spec
.
02 Nov 2016   #2
mjf

Windows 7x64 Home Premium SP1
 
 

Your description of the problem is not totally clear.
But as a start

Did you successfully perform a system image restore?
Afterwards is the SSD Trim enabled - use elevated command prompt:

fsutil behavior query disabledeletenotify
Results-
DisableDeleteNotify = 1 (Windows TRIM commands are disabled)
DisableDeleteNotify = 0 (Windows TRIM commands are enabled)

While you are at it do a file system check
> sfc /scannow

Another thing to check is can you mount the Macrium image in question and browse through the contents.
My System SpecsSystem Spec
03 Nov 2016   #3
Alexey2912

W7 Pro 32bit
 
 

Results:

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\XPS>fsutil behavior query disabledeletenotify
DisableDeleteNotify = 0

C:\Users\XPS>> sfc /scannow
'/scannow' is not recognized as an internal or external command,
operable program or batch file.

C:\Users\XPS>sfc /scannow

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.

Windows Resource Protection found corrupt files and successfully repaired
them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
example C:\Windows\Logs\CBS\CBS.log

C:\Users\XPS>



Thanks for replying.

Above the results of fsutil behavior query disabledeletenotify and sfcscan, as seen windows trim commands are enabled but sfc found corrupted files in CBS.log.

Now I'll try to make things clearer.....

1. Creating a full back along with verification takes approx 14 mins.

2. Restoring a backup, using boot Rescue media and usb external drive on which the image is stored, takes around 29 mins.

3. System reserved is restored in less than a min, while restoring Windows, verification is fine but after that it stalls for 10-15 mins, at SSD targeted, Trim starting, till Trim is successful take around 12-15 mins. Total time for verification and restoring is approx 29 mins with 10-15 mins of rescue media stuck.

4. Tried restoring the 2nd backup, same results.

5. Can install a AV, but windows action center wouldn't recognize, despite it's running, prompting to activate AV.

6. Do you feel that after this sfc repair this won't happen?

7. Do I need to create new backups, or is it possible to correct the 2 images?

Appreciate your expert assistance.

Kind regards!






Edit:

1. Just wanted to make it more clear, create backups on live, running windows, restoration using boot rescue media. (Cold imaging).
My System SpecsSystem Spec
.

03 Nov 2016   #4
mjf

Windows 7x64 Home Premium SP1
 
 

Quote   Quote: Originally Posted by Alexey2912 View Post
6. Do you feel that after this sfc repair this won't happen?

7. Do I need to create new backups, or is it possible to correct the 2 images?
It's hard to say what caused the system file corruption. On the positive side it was repairable - sometimes it can't be repaired.
Did this cause the Macrium problem or did your version of Macrium cause the problem? - I don't know.

Here is what I would do
1) Update to the latest V6 if this isn't the latest and make another restore pe disk.
2) Keep the old system images since they appear to eventually restore with a repairable system file error.
3) Make a new system image after the system file fix.

The acid test will be restoring the new system image using the latest restore pe disk and see if the problem persists. This is your call.
This sort of test is always less risky if you have a spare SSD/HDD lying around as the "new" restore OS drive.
My System SpecsSystem Spec
04 Nov 2016   #5
Alexey2912

W7 Pro 32bit
 
 

Thanks again for replying.

Shall do as suggested.

Its the latest Macrium reflect, updated.

Faced none such issues, using 6.1.

Created rescue media on multiple optical discs, but same.

I feel the issue is with the PE ...

Anyways shall keep you posted.

Kind regards.
My System SpecsSystem Spec
04 Nov 2016   #6
mjf

Windows 7x64 Home Premium SP1
 
 

Keep us informed Alex as many people use Macrium with a high level of confidence.

It would be useful if other members could comment on their experience with the latest version of Macrium including any issues with the rescue pe.
My System SpecsSystem Spec
04 Nov 2016   #7
Alexey2912

W7 Pro 32bit
 
 

Hi,

I shall keep you informed, once I create a new backup of the repaired W7, and perform a restore of it.

Thanks.
My System SpecsSystem Spec
04 Nov 2016   #8
Alexey2912

W7 Pro 32bit
 
 

Hi,

The sfc scan results, display that corrupted files have been repaired, but they reappear on re scan.......strange?

May be the fresh W7 install is a corrupted one....

I will only be sure only after have seen a non corrupted W7 install, create it's backup and restore using Macrium 6.2.......

Any methods, besides another clean install to repair them?

Thanks.



PS: The CBS log file is huge to post.....



Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\XPS>sfc /scannow

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.

Windows Resource Protection found corrupt files and successfully repaired
them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
example C:\Windows\Logs\CBS\CBS.log

C:\Users\XPS>sfc /scannow

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.

Windows Resource Protection found corrupt files and successfully repaired
them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
example C:\Windows\Logs\CBS\CBS.log

C:\Users\XPS>
My System SpecsSystem Spec
04 Nov 2016   #9
mjf

Windows 7x64 Home Premium SP1
 
 

You sometimes need to run sfc /scannow a number of times. See how you go.

If you do this and sfc still reports errors then a data backup and a clean install could be an option.
My System SpecsSystem Spec
04 Nov 2016   #10
Alexey2912

W7 Pro 32bit
 
 

I ran it 3 times and another on reboot, still the same....

Clean install again.....

Thanks anyways for trying to figure out, using you smart brains.
My System SpecsSystem Spec
Reply

 Image restore query!




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Factory Restore not working, error 0xe0ef000d, Image Restore?
Hello people. I'm new to this so please bear with me. Okay so I'll give a brief explanation of what's going on. So a couple of years ago I gave my old computer(HP Pavillion p2 Series /with Windows 7 home) to my younger siblings, because I moved and got a new computer for school. I put a secure...
Backup and Restore
windows system image backup query
I have my system on drive "c" which is a 125gb ssd. I have partitioned a second internal drive. I have put programmes in one partition called "f". I have put all my data in a partition labelled "m". I have a third partition labelled "z" to take the system image backup. When I made a system...
Backup and Restore
Restore points query
Hi. How can I have all restore points to persist, so they are not deleted ?
Backup and Restore
Image Query for new SSD
Hi Guys, have had mega problems with my OCZ Vertex 128GB SSD and I know it is failing see link here for info and pics. http://www.sevenforums.com/hardware-devices/131065-failing-ssd.html My question is this: I have made two Images 1. A bare installation with all current drivers. 2. A...
Hardware & Devices
System Restore and Personal Data Query
Hi I'm getting just a little confused regarding System Restore and just what goes into Restore Points. I have some 6.5Tb of disc space 18 partitions, most of which contains only personal data, i.e. no system files or installed programs of ANY kind. Up to now all partitions have been enabled...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:33.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App