Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Image your system with free Macrium

19 Mar 2012   #561

Windows 7 Ultimate
 
 

Quote   Quote: Originally Posted by whs View Post
Without the 100MB active system partition, it will not boot. Check first on the system from where the image came whether that 100MB partition exists. Then make 2 seperat images of that and of C: (you can use the one you have).

On the new system you will first have to define those 2 partitions before you can rstore them. The 100MB partition is the active partition.

But that is not the end of your troubles. The whole project will probably die in the drivers and the Windows 7 product activation. What I suggest is to install Windows 8 Consumer Preview on the old XP system. Then you have a clean slate.
Thanks - on my current Windows 7 system, there is a 100mb system partition set as active and two primary drives, of about 250gb each.

so first, I need to make an image of the system partition, then restore that to the old xp box? How or where to restore it to?


My System SpecsSystem Spec
.

19 Mar 2012   #562
whs
Microsoft MVP

Vista, Windows7, Mint Mate, Zorin, Windows 8
 
 

To get it on the XP system is no big deal. To make it work, is another matter. Do you in fact have an extra Windows 7 product key to make it work on another system?? If not, I would stop right here.
My System SpecsSystem Spec
21 Mar 2012   #563

Windows 7 Ultimate
 
 

I ended up just doing a new install and now trying to copy files and replicate settings. Thanks for the help.
My System SpecsSystem Spec
.


26 Mar 2012   #564

Linux Mint 17 Cinnamon | Win 7 Ult x64
 
 
Macrium Free: Create custom WinPE with added drivers

Hi,

I recently imaged my system with Macrium, and I got the missing drivers errors. I had my mobo cd handy and could load the drivers. Surprisingly, Macrium was missing the RTL8111 LAN driver.

Anyway, I integrated the drivers from my mobo into the .wim file per the knowledgebase article, but silly me, I didn't create a new rescue disk. So when I went to use the disk, it of course complained of missing drivers.

So I went to create a new WinPE, but I'm not sure how to proceed when I'm asked for the .wim file. The default one that is checked is the one dated 2009 (winPE.wim). The one I integrated my drivers into is called boot.wim, and is 14mb larger (for 2 drivers??)

Anyway, I note that Macrium do not allow users of the free version access to any support whatsoever, nor do they allow access to the forums (The latter is quite disappointing). So I'm hoping that some expertise exists here...

Can anyone clarify if I should use the boot.wim, or do I have to stick with the WinPE.wim installed with the software?

thanks
Tanya

ooops.. I meant to post this as a new thread. My mistake, sorry.
My System SpecsSystem Spec
26 Mar 2012   #565
mjf

Windows 7x64 Home Premium SP1
 
 

You can integrate your driver using the DISM command to the base winpe.wim then use the "custom" winpe.wim option in Macrium (free). If you have selected the option to always include new drivers manually after boot then that would work also.
My System SpecsSystem Spec
26 Mar 2012   #566

W7 X-64 W8.1 X-64 Opensuse 13.1 W2003 Server
 
 

Hi there
I know this is Windows 7 but some of you are probably trying out the new W8 consumer preview.
Hope I'll save you some time here ==:

This doesn't work on it !!! (yet).

IMO if you want a FREEBIE that is reliable -- takes a bit of a learning curve but works in Windows 7 and W8

1: get the imageex.exe from the WAIK (same program from Windows 7 WAIK can be used on W8 too).

2: Create an install.WIM file of your running system system

3: Image it.

4: extract it when you want to restore your image.

Commands are a bit fiddly but works every time. Google a bit as the explanation is a bit complex for this type of thread.


For Windows 8 there is a built in utility for restoring an image called recimg.

http://www.eightforums.com/installat...ronis-etc.html

For Windows 7 the utility doesn't exist but you can still restore a .WIM file

read through this link -- should help to further searches for you.

http://systemmanagement.ro/blog/2009...mage-wim-file/

On Windows 7 I have acronis -- which also works on W8 --but if you have a few machines paying 45 USD per machine gets expensive so on W8 I'm using the "Freebie".

Cheers
jimbo
My System SpecsSystem Spec
26 Mar 2012   #567

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I can confirm that it doesn't work on win 8. See this thread. Macrium Reflect Free BSODS - Windows 8 Forums
My System SpecsSystem Spec
26 Mar 2012   #568
Microsoft MVP

Windows 7 Ultimate SP1 X64 (Windows 8.1, Linux Mint, Windows XP and others in VM)
 
 

You can also use Hiren's Boot SD, download the ISO file and burn it to CD/USB drive boot into mini XP. One of the many programs on there is the linux version pf Macrium rescue.
My System SpecsSystem Spec
26 Mar 2012   #569

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by essenbe View Post
You can also use Hiren's Boot SD, download the ISO file and burn it to CD/USB drive boot into mini XP. One of the many programs on there is the linux version pf Macrium rescue.
It is actually an old PE version(4.2 I think) but it still works even with images created by v5.
My System SpecsSystem Spec
26 Mar 2012   #570

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

@Jimbo - have you only just realised this?

Wim imaging has been around for a few years. It is not intended as a backup mechanism - it is possible to use it that way - but it is not practical.

Yes , In am aware of recimg on win8 ( it is not for a complete restore btw - your data is not included ). It is nowhere near as good as a 3rd party app.

Free ( or paid ) 3rd party apps. specially made for the job are much better.




@ Kado - can you elaborate on macrium bsod on win8 ?

How and when did that happen?
My System SpecsSystem Spec
Reply

 Image your system with free Macrium




Thread Tools



Similar help and support threads for2: Image your system with free Macrium
Thread Forum
Imaging with free Macrium Tutorials
Solved Macrium Reflect Free ...I'm in :-) Backup and Restore
Solved Tie In Between Macrium Boot Disk And System Image Backup and Restore
Macrium free 5 couldn't create image Backup and Restore
Macrium Free question? Backup and Restore
Solved Macrium free backup won't end Backup and Restore

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 04:00 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33