Question about Backup System Image

Page 1 of 2 12 LastLast

  1. Posts : 1,219
    Windows 7 Pro 32/64 bit and Windows 10 Pro 32 Bit/64bit
       #1

    Question about Backup System Image


    I originally posted this to the tutorial section but no one has answered me and if i posted it in the wrong section you can remove it and leave it where it does belong but i really would like an answer before i go out and purchase a new external HD and find out i bought it for nawt.

    I used the system image backup in windows 7 home premium.
    btw i backed it up to an external HD
    It made a folder with several subfolders after the backup and was about 55gigs
    Now it is next month and i added programs, updates etc and i want to make another image does it go over the existing image backup or does it create a new folder with new subfolders?
    I would like to understand this because i plan on purchasing a bigger HD and want to estimate how much I need

    Also when i get the bigger external HD and do another backup image since it will not see the first one will it make a new beginning one? or will it have a fit and look for the old one on the other smaller external HD- then what would I do?
    I did the first one just so i could see how it is done and to have something until I get a bigger external HD

    thank you very much
    Robin
      My Computer


  2. Posts : 2,036
    Windows 7 Professional x64
       #2

    I am not sure how much room it will use but you don't need to worry about it not fitting. It MAY overwrite the existing image. It may give you a warning when you start it. You will want to use the last one you created anyway, so it's okay to create another "on top of the one you have now.

    I have a 250GB external and back up 4 systems on it with Windows imaging tool. I have run it on each computer several times and still have 60-70GBGB free space.

    Hope this helps.
      My Computer


  3. Posts : 1
    windows 7 ultimate
       #3

    I'm a total windows 7 newbie (ultimate)

    When about to do the backup, Windows will tell you something like "this may take up to 232gigabytes. proceed?".

    Is this a fairly accurate estimate? ... or does it actually compress the system image?
    I'm wondering how you have so many computers fitting on a single external drive. (also, I think that answers my next question, "can you back up multiple computers to a single drive?")

    OP - I'm trying to keep this on your topic (and avoiding hijacking!)... but I'm also trying to avoid adding another post to this forum that some may feel is repetitive.

    Thanks
      My Computer


  4. Posts : 1,219
    Windows 7 Pro 32/64 bit and Windows 10 Pro 32 Bit/64bit
    Thread Starter
       #4

    nate42nd said:
    I am not sure how much room it will use but you don't need to worry about it not fitting. It MAY overwrite the existing image. It may give you a warning when you start it. You will want to use the last one you created anyway, so it's okay to create another "on top of the one you have now.

    I have a 250GB external and back up 4 systems on it with Windows imaging tool. I have run it on each computer several times and still have 60-70GBGB free space.

    Hope this helps.
    but the drive i have it on is only 100gigs each partition and it is a 200gig ex HD. I have the laptop for one partition- the desktop for the other. and have used 55gigs.
    I want to buy a 1-tb so i can partitioin it 3 ways and make it 325 gig each and keep updating and using the 3rd partition for anything else. Since the first backup will not be on there what is going to happen when i put it on the new drive since it will not see it?

    Will it start all over again or is it going to have a fit because it cannot see the other backup?
    I was going to get a 750gig but i got the same price for the 1-tb so why not get the 1-tb if it is the same price.

    robin

    robin
      My Computer


  5. Posts : 2,036
    Windows 7 Professional x64
       #5

    Windows will compress and overwrite the last backup and current one too. The compression ratio I can't remember, but you will be fine. You will always have the last image you run. If you get a 1TB you can split it up for back-ups (if I understand you right) but you don't need to....Windows will find the correct one if you ever need it. It will create a folder and put ALL images into that. You can have several images from different computers on the same drive and it will be no problem.

    I hope I understand your question. I hope this helps you. Have a great day.
      My Computer


  6. Posts : 16,129
    7 X64
       #6

    Hi Robin,

    I understand where you are coming from.

    There are some major shortcomings with Windows System Image.

    The GUI forces you to image the system and boot partitions - you can add other partitions if you like - BUT you will have to restore them all. You might only want to restore one.

    It adds the extra/incremental images to the same folder - you can't put them somewhere else if you are short of space.

    If you move the image , or change the drive/partition arrangement, it might not recognize them - and you won't be able to restore.

    There are free 3rd party programs which allow you to choose which partition(s) to image, where to store the images, which to restore, and where to restore them to. They also allow you to browse to locate an image - so if something is different about the drive arrangement, or the name has been changed - you can still pick it up and restore it.

    In addition, they are faster and offer better compression.

    Paragon Backup & Recovery 10 Free Edition

    Macrium Reflect FREE Edition - Information and download

    Hope it helps.
      My Computers


  7. Posts : 2,036
    Windows 7 Professional x64
       #7

    Thanks SIW. You're the man.

    I took your advice months ago and have had mixed results with Macrium and Paragon. Sometimes they work and sometime they don't. Windows imaging has worked every time.

    What might be my problem? User error?

    I thought it was my external disk for a while....but it works fine in every other way and with Windows imaging.

    I can't figure out what it may be. I get "write errors" when I use Macrium or Paragon. (even got one trying to back up to a network drive) Do you know what would cause that (considering the drive works fine otherwise)
      My Computer


  8. Posts : 16,129
    7 X64
       #8

    That's odd. Particularly as you get it with both apps.

    Not sure - maybe you need to run chkdsk /f /r on the drive.

    Why you should get that on a network drive is a mystery - maybe a permissions issue - any error messages?

    I see you have a WD drive. Try the free WD Acronis app. - see if that works.

    http://support.wdc.com/product/downloaddetail.asp
      My Computers


  9. Posts : 2,036
    Windows 7 Professional x64
       #9

    It's been a while since I tries the network drive. I can't remember what the problem was there.

    Someone gave me advice to run chkdsk /f /r on the drive. It came out fine as I recall.

    I have read ALL of Macrium's tutorials and followed them to the letter. I have test PCs and I think I have had one (maybe two) successful image and restore with it. This is out of 12-15 tries. I finally gave up.

    I always run 64bit but Macrium seems to install the correct version. It says at install it for 64 bit systems.

    I don't know what to think. I have read a lot of great reviews and I know it's a good app. I will look you up next time I get the time to try again and tell you what the errors are....I think it may have been you who told me my external disk may be going bad. That's when I ran the chkdsk /f /r

    It MUST be something with me....but on 5 different systems and 3 different drives...I just don't knwo what to think.

    Anyone reading this should not be afraid to try Macrium or Paragon.
      My Computer


  10. Posts : 1,219
    Windows 7 Pro 32/64 bit and Windows 10 Pro 32 Bit/64bit
    Thread Starter
       #10

    I am still a bit confused.

    All I want to do is start a brand new system image on a brand new external HD even though I already made one on another ex HD. Can I do this without windows 7 barking?

    robin
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 08:06.
Find Us