Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Disk Image Restore Problem

02 Jun 2010   #1

windows 7 premium
Disk Image Restore Problem

I generated a system repair disk for my W7 64 bit notebook. I also generated a system image on an external USB drive.

I have a virgin HDD that I wish to install the system image on. I go through the startup using the repair disk and with the USB drive connected. The system image is found but it is identified as being on C: drive of a computer with my computer's name.

The image installation fails with a message "The system image restore failed. No disk that can be used for recovering the system disk can be found."

The error instruction suggested I disconnect the USB drive, reboot and re-attach the USB drive. I did so with similar results.

Anyone with suggestions? Thanks

My System SpecsSystem Spec

03 Jun 2010   #2

Windows 7

Do you have any OS about WinPE which include a ghost software? You could run it with CD-Rom or U Disk. It will not take the C:
I had used it and copy the image from removable hard disk to local hard disk then recovery the OS.
My System SpecsSystem Spec

 Disk Image Restore Problem

Thread Tools

Similar help and support threads
Thread Forum
How to Restore once I use copy files, or disk image=still confused
Hi everybody! Its me again (XP VM USER) with a new thread which is a followup question so its a new direction from the original thread here::: ignatzatsonic gave me great advice in Post # 41 which I...
Backup and Restore
Can I restore a Windows 7 Disk Image to the second hard drive
1 down vote favorite I am going to have to replace my computer as it has reached the end of its working life. It operates under Windows 7. The new computers I am looking at already have Windows 7 installed and have two hard drives. I have been using my existing computer for a number of...
Installation & Setup
0x80070057 incorrect parameter when trying to restore image new disk
This drove me MAD for almost a weak now. Everytime I tried to restore my system image to another hard drive it would give me this error. As others may have the same issue and searching the internet did not turn up this solution I thought to repost this here. It can be usefull. Basically,...
Backup and Restore
New SSD OS shows as Disk 1 after Image restore Fix?
Why is my SSD (64gb) showing as Disk 1 (and how do I fix it). I used Macrium to image and restore Win 7 from an IDE HDD (a fresh/clean install as the only HDD). I have a dual boot and the 2nd HDD (Sata 1) was unplugged when I created the image. After creating the image, I unplugged...
General Discussion
Recovery image based disk upgrade - can't restore to backup medium
I thought I was being clever, but I've hosed my system! I wanted to upgrade to a bigger disk. The old disk (I'll call it HD80) is an ancient 80Gb SATA I drive. The new one (HD500) is a 500MB SATA II drive. What I did was: 1. Create a partition on HD500, format it to NTFS, label it D: 2. System...
Backup and Restore
Restore Win7 Image to Advanced Format Disk - Not Genuine Windows
I bought some new Seagate hard drives that happened to have this feature . . . but I wasn't reading the fine print when I bought them. "Seagate SmartAlign™ technology1 provides a transition to 4K sectors without the need for software utilities" When restoring Windows 7 disk images to these...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:45.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App