Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Eudora and Windows 7

23 Jan 2010   #1

unknown
 
 
Eudora and Windows 7

Recently upgraded our PC to a new model running windows 7. I have been using an old Eudora for our mail for many years -version 7.1.0.9 I am having trouble using the ctrl key to select multiple addresses for mailings. If I click on one address and hold down the control key then click on a second its ok. BUT when i click on a third i lose the first selection. In other words I am only able to select two entries at a time. Eudora forum indicated this is a problem associated with Vista and Windows 7 since it works just fine on the old XP. Any known soluitons for this aside from adding addresses two at a time.

My System SpecsSystem Spec
.

23 Jan 2010   #2

W7x64 Pro, SuSe 12.1/** W7 x64 Pro, XP MCE
 
 

Not knowing the client, I can only make guesses...such as using the Shift key, instead of Ctrl, but that would only work if the items selected were in a continuous sequence. However, on some software, after selecting multiple files via the Shift key, you can unselect individual files within the sequence with the Ctrl key without losing the rest of the selection. If this doesn't work in Eudora, then I would say that the fault is Eudora's, not Windows 7's.

Another possibility if the files not to select are only a couple, it might work if you select them first, then use invert selection...if the client has that option.
My System SpecsSystem Spec
23 Jan 2010   #3

Windows 7 Professional 64-bit
 
 

You might want to give their new version 8 beta a trial, its based on thunderbird apparently.
My System SpecsSystem Spec
.


23 Jan 2010   #4

unknown
 
 

The new beta seems to have the same problem. I have tried doing the Shift control as the previous poster recomended. No. what I don't understand is why I had no problem with this with the old windows XP. The vista/Windows 7 does not want to allow me to use the control key to select more than two entries. I found this posting from Feb 2008 in the Windows Development Forum:
I am facing some issue related to Multiple Selection in Tree-View control on Vista. I am doing the following steps:

Assume there are 3 tree-items.
(1) Select first tree-item.
(2) Press CTRL and select 2nd item. For doing this, I am calling TreeView_SelectItem(SecondItem). So, the FirstItem will be de-selected and SecondItem will be selected as expected. So, I need to set the style for FirstItem to TVIS_SELECTED by using TreeView_SetItemState(tvHwnd, FirstItem, TVIS_SELECTED, TVIS_SELECTED). till this point its fine.
(3) Now, I am trying to select ThirdItem (+CTRL). I am doing that by TreeView_SelectItem(ThirdItem). Now, the real problem comes here. On Window XP SecondItem will be de-selected and FirstItem remain selected. So, I manually set the state of SecondItem to TVIS_SELECTED, and hence all the 3 items become in selected state.
But in Vista, TreeView_SelectItem is deselecting all the previously selected items. Hence, even if I set state for SecondItem as TVIS_SELECTED, only last 2 items become in selected state. (remaining items are getting de-selected).

Hence, on VISTA multiple selection in Tree-View control is not at all getting done. On XP everythingn is working fine.

Can anyone please help me out in this scenario?

I believe this is what I am coming up against. Any ideas out there other than click two addresses at a time.
My System SpecsSystem Spec
23 Jan 2010   #5

W7x64 Pro, SuSe 12.1/** W7 x64 Pro, XP MCE
 
 

You could try this:

Quote:
To select multiple files or folders by using check boxes:

Open Folder Options by clicking the Start button , clicking Control Panel, clicking Appearance and Personalization, and then clicking Folder Options.

Click the View tab.

Select the Use check boxes to select items check box, and then click OK.

To clear a selection, click a blank area of the window.
This is for Windows Explorer, but who knows, it might work.
My System SpecsSystem Spec
24 Jan 2010   #6

unknown
 
 

Thanks but it does not help.
My System SpecsSystem Spec
24 Jan 2010   #7

W7x64 Pro, SuSe 12.1/** W7 x64 Pro, XP MCE
 
 

Of course, you could use a different client and import your old email into it.
My System SpecsSystem Spec
24 Jan 2010   #8

unknown
 
 

old dogs don't like new tricks. Been using Eudora for over 12 to 15 years and am use to the program and its layout.
My System SpecsSystem Spec
Reply

 Eudora and Windows 7




Thread Tools



Similar help and support threads for2: Eudora and Windows 7
Thread Forum
Cannot send email with Eudora 7, Eudora 8 or Thunderbird Browsers & Mail
eudora default Browsers & Mail
Send attachment make Eudora default Browsers & Mail
Eudora--PDF & .WMV Attachments Software

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:07 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33