Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD, Random, Windows 7


03 Jul 2012   #1
ZMan

windows 7 professional x32
 
 
BSOD, Random, Windows 7

Is Windows 7 . . .
- x86 (32-bit) or x64 ? 64Bit System
- the original installed OS on the system? Windows 7
- an OEM or full retail version? OEM
- OEM = came pre-installed on system
- Full Retail = you purchased it from retailer

- What is the age of system (hardware)? 6 Months Old
- What is the age of OS installation (have you re-installed the OS?) 6 Months

This system is randomly rebooting and not sure why try to troubleshoot the issue but I been hitting the wall on the BSOD.Try to look up the more information on the net but not getting anywhere.



My System SpecsSystem Spec
.

03 Jul 2012   #2
ZMan

windows 7 professional x32
 
 

Anybody know
My System SpecsSystem Spec
03 Jul 2012   #3
FredeGail

Microsoft Windows 7 Ultimate: x64 (SP1)
 
 

Hello ZMan.

BSOD Analyse

It's a fact that the hardware identity would be sluggish when the BIOS is older. You're having the 2009 of BIOS. Before we'll proceed, update your BIOS.

ZMan's Computer Model - Bios Update

Choose the first option in the BIOS menu, which is the wizard.

Code:
System Model	HP Compaq 6005 Pro SFF PC
Memory

Once you've done that, check your memory.

Quote:
Looking at your bugcheck it's likely that a memory corruption event were there. Though a driver could be causing the memory to be borked, but we're usually suggesting a memory test before moving forward. Do a scan with Memtest86+. Memtest is a scanner that'll check your sticks for errors. To ensure that we'll know if it's the slots on the motherboard that's broken, or the sticks itself - we have a little procedure we'll recommend. Remove 1 stick, scan the other with Memtest in the current slot. After 7 passes, move the stick to another slot and scan, and so on and so forth until you've scanned all the sticks, and all the slots, one by one.

Memtest86+ - Advanced Memory Diagnostic Tool
BCCode
Code:
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffffa8002c05fb0, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff8000290c575, If non-zero, the instruction address which referenced the bad memory
Best Regards,
Frederik.
My System SpecsSystem Spec
.


Reply

 BSOD, Random, Windows 7




Thread Tools



Similar help and support threads for2: BSOD, Random, Windows 7
Thread Forum
Solved Random BSOD Windows 7 x64 BSOD Help and Support
Solved Random BSOD on windows. BSOD Help and Support
random bsod on windows 7 - f4 03 BSOD Help and Support
Random BSOD - Windows 7 x64 BSOD Help and Support
Windows 7 Random BSOD BSOD Help and Support
Random Windows 7 BSOD BSOD Help and Support
Windows 7 64 Bit Random BSOD BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 05:39 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App