Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Memory Management BSOD


25 May 2013   #1
marcuslee

Windows 7 Ultimate Edition Service Pack 1 build 7601 (64-bit)
 
 
Memory Management BSOD

I have recently upgraded my Mobo, CPU and RAM. However it BSOD's with memory_management as the error. What can I do to try and diagnose the issue?

Thanks

Marcus


My System SpecsSystem Spec
.

25 May 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Your crash dumps are not showing any probable finite reason.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
  1. Click on the Start button
  2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
  3. Select the “Startup” tab.
  4. Deselect all items other than the antivirus.
  5. Apply > OK
  6. Accept then restart.
Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings. Also set the BIOS to default, too.
How To Clear CMOS (Reset BIOS)

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

If those tests comes good, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

warning   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip   Tip

Let us know the results, with the subsequent crash dumps, if any. Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Also let us know how old the build is.
_____________________________________________________________________________
BSOD ANALYSIS:
Code:
BugCheck 1A, {41287, c3, 0, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+454f5 )

Followup: MachineOwner
-----------------------------------------------------------------------------------------
BugCheck 1A, {41287, 4b000006, 0, 0}

Probably caused by : hardware ( nt! ?? ::FNODOBFM::`string'+454f5 )

Followup: MachineOwner
---------
My System SpecsSystem Spec
25 May 2013   #3
marcuslee

Windows 7 Ultimate Edition Service Pack 1 build 7601 (64-bit)
 
 

Thank you for that, I will go ahead and do these steps.

The system is about 2 days old. I am OCing, but it was done by the company (aria.co.uk) that I purchased the Mobo+CPU+Ram from.

Furmark leveled off at 81-83 degrees. No artifacts.
My System SpecsSystem Spec
.


25 May 2013   #4
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Quote   Quote: Originally Posted by marcuslee View Post
Thank you for that, I will go ahead and do these steps.

The system is about 2 days old. I am OCing, but it was done by the company (aria.co.uk) that I purchased the Mobo+CPU+Ram from.

Furmark leveled off at 81-83 degrees. No artifacts.
Remove the overclocking and follow the suggested steps. Those are just tests. Depending on the results we will suggest you the further steps.

Furmark resulted good
My System SpecsSystem Spec
26 May 2013   #5
marcuslee

Windows 7 Ultimate Edition Service Pack 1 build 7601 (64-bit)
 
 

Ran memtest86+ for 8 passes, no errors. Removed OC.

The PC is not hot, I will upload speccy in a bit. Starting driver verifier.
My System SpecsSystem Spec
26 May 2013   #6
marcuslee

Windows 7 Ultimate Edition Service Pack 1 build 7601 (64-bit)
 
 

OK, been running driver verifier all day, no issues. In fact since removing the OC settings it seems to be stable. Shame, I purchased this package because it was OC'd by people who should know what they were doing, I was hoping to get more performance for my money, rather than spend the extra on an i7.
My System SpecsSystem Spec
26 May 2013   #7
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

It happens. Sometimes overclocking fails. And when it fails, its better to not overclock.

Sorry to know the solution, but happy that it is not crashing ATM
My System SpecsSystem Spec
Reply

 Memory Management BSOD




Thread Tools



Similar help and support threads for2: Memory Management BSOD
Thread Forum
BSOD about Memory Management BSOD Help and Support
Solved Memory Management BSOD BSOD Help and Support
BSOD - Memory Management BSOD Help and Support
BSOD Memory Management BSOD Help and Support
Memory Management BSOD BSOD Help and Support
BSOD, Memory management BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 07:18 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App