Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD


18 Aug 2010   #1

W7 RTM Ultimate x64
 
 
Random BSOD

For the last couple of weeks ive been having BSOD's at least once a day, it doesn't happen straight away but usually when ive walked away from the PC, or during my daily activities.

I used the instructions from here to get some info.

Windows 7 x64
Retail
bout 8-9 months, GFX card is about a year.
Reinstall was roughly 2-3 months ago.

Any help would be much appreciated.

My System SpecsSystem Spec
.

18 Aug 2010   #2

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Uber Philf View Post
For the last couple of weeks ive been having BSOD's at least once a day, it doesn't happen straight away but usually when ive walked away from the PC, or during my daily activities.

I used the instructions from here to get some info.

Windows 7 x64
Retail
bout 8-9 months, GFX card is about a year.
Reinstall was roughly 2-3 months ago.

Any help would be much appreciated.

Love to help but no DMP file was upload you probably didnt run this as admin. If this fails just take the dmp file from C:\windows\minidump and upload it to us in zip'ped form

Ken
My System SpecsSystem Spec
18 Aug 2010   #3

W7 RTM Ultimate x64
 
 

Don't have a dump in that folder :/

Suppose ill have to wait till it happens again..... euck.
My System SpecsSystem Spec
.


18 Aug 2010   #4

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Uber Philf View Post
Don't have a dump in that folder :/

Suppose ill have to wait till it happens again..... euck.

Enzo

You may need to change your system control panel to reflect the fact that you want DMP files to be generated. See pix

You may also want to do a search now for *.DMP just in cased
My System SpecsSystem Spec
18 Aug 2010   #5

W7 RTM Ultimate x64
 
 

Aww, thanks man, that would explain the no DMP, was set not to...

But ive now set it to the same as your screenshot, will report back if the BSOD returns
My System SpecsSystem Spec
19 Aug 2010   #6

W7 RTM Ultimate x64
 
 

FFS, i have another crash.. and this time i expected a dump, the log even said it made a dump, then when i went to retrive it, it's nowhere to be found... empty.. blank... nothing.

I ran that BSOD program again in hope it may have something...

This may help as well.
Quote:
The computer has rebooted from a bugcheck. The bugcheck was:
0x00000050 (0xffffffffffffff8b, 0x0000000000000001, 0xfffff880012c0221, 0x0000000000000000).
A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 081910-28407-01.
My System SpecsSystem Spec
19 Aug 2010   #7

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium SP1, clean install, upgrade disc
 
 

There is not dump but we have the code 50
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA : Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS


Enzo
Try to uninstall your antivirus and use Microsoft Security Essentials
Go to the website of your hard drive manufacturer and take the test for your hard drive.
Cannot give much help on drivers, which is, potentially, the reason for the problem, without the files. If the other suggestions, do not help, there is a list of outdated drivers, with your file. We can use that list to help install updated drivers, which may help
Run memory test for 6 passes for each stick. Then test the MB sockets with a good stick
http://memtest.org/

Here is a list of outdated drivers that were shown on one of the reports.

iirsp iirsp iirsp
adpu320 adpu320 adpu320
arc arc arc
SiSRaid2 SiSRaid2 SiSRaid2
LSI_FC LSI_FC LSI_FC
BrUsbSer Brother MFC USB Serial Brother MFC USB Serial
BrUsbMdm Brother MFC USB Fax On Brother MFC USB Fax On
BrFiltUp Brother USB Mass-Stora Brother USB Mass-Stora
BrSerWdm Brother WDM Serial dri Brother WDM Serial dri
BrFiltLo Brother USB Mass-Stora Brother USB Mass-Stora
Brserid Brother MFC Serial Por Brother MFC Serial Por
nfrd960 nfrd960 nfrd960
adpahci adpahci adpahci
adp94xx adp94xx adp94xx
SiSRaid4 SiSRaid4 SiSRaid4
Point64 Microsoft IntelliPoint Microsoft IntelliPoint
DXGKrnl LDDM Graphics Subsyste LDDM Graphics Subsyste
iaStorV iaStorV iaStorV
ebdrv Broadcom NetXtreme II Broadcom NetXtreme II
elxstor elxstor elxstor

If no other remedy works, I can help you find updated drivers. We can give so much more help with the dump files, however.
My System SpecsSystem Spec
19 Aug 2010   #8

W7 RTM Ultimate x64
 
 

I'm already running MSE, and what test am i to run on my drive? short test, long test?
My System SpecsSystem Spec
19 Aug 2010   #9

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium SP1, clean install, upgrade disc
 
 

I would go to the website of the hard drive manufacturer and take the most comprehensive test that they offfer (usually offer only one) to test that the Hard Drive is ok.
My System SpecsSystem Spec
19 Aug 2010   #10

W7 RTM Ultimate x64
 
 

Well i have 2 HDD's but the one with my OS on it is a Seagate, and the program offers a heap of tests, SMART, short test, long test.

I've just selected short test for the time being.
My System SpecsSystem Spec
Reply

 Random BSOD




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:20 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33