Windows 7: Crashes after installing new RAM

saroy94 · 21 Aug 2010

I have Windows 7 x32 bit and it's a full retail version. I only started to get crashes once I installed new RAM, however I've taken them out now, but I just wanted to know why there were crashes, thanks.

usasma · 22 Aug 2010

The errors point to hardware problems (which is appropriate considering it was the RAM causing your problems).
Most of the errors point to RAM.

BSOD BUGCHECK SUMMARY

Code:


Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Sat Aug 21 09:07:26.419 2010 (UTC - 4:00)
System Uptime: 0 days 0:02:19.525
BugCheck 1, {9199e24d, 0, ffff, 0}
Probably caused by : win32k.sys ( win32k!NtUserRegisterWindowMessage+0 )
BUGCHECK_STR:  0x1
PROCESS_NAME:  ie4uinit.exe
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Sat Aug 21 08:56:06.296 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:59.528
BugCheck A, {96fa24, 2, 1, 82cac258}
Probably caused by : memory_corruption ( nt!MiReplenishPageSlist+149 )
BUGCHECK_STR:  0xA
PROCESS_NAME:  wlmail.exe
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Sat Aug 21 08:46:33.223 2010 (UTC - 4:00)
System Uptime: 0 days 0:02:02.454
*** WARNING: Unable to verify timestamp for SYMEVENT.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEVENT.SYS
BUGCHECK_STR:  0x1a_41790
PROCESS_NAME:  ccSvcHst.exe
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Sat Aug 21 08:43:47.207 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:18.439
BUGCHECK_STR:  0x1a_31
PROCESS_NAME:  WerFault.exe
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Sat Aug 21 06:55:32.684 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:49.666
BUGCHECK_STR:  0x19_20
PROCESS_NAME:  csrss.exe
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Sat Aug 21 06:53:50.630 2010 (UTC - 4:00)
System Uptime: 0 days 0:02:38.612
*** WARNING: Unable to verify timestamp for SYMEVENT.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEVENT.SYS
BUGCHECK_STR:  0x1a_41790
PROCESS_NAME:  WmiPrvSE.exe
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Wed Aug 18 15:38:48.361 2010 (UTC - 4:00)
System Uptime: 0 days 0:25:53.592
*** WARNING: Unable to verify timestamp for xusb21.sys
*** ERROR: Module load completed but symbols could not be loaded for xusb21.sys
BugCheck 1000007E, {c0000005, 9c7a14fd, 89527a34, 89527610}
*** ERROR: Module load completed but symbols could not be loaded for Wdf01000.sys
*** WARNING: Unable to verify timestamp for MijXfilt.sys
*** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys
Probably caused by : xusb21.sys ( xusb21+14fd )
PROCESS_NAME:  System
BUGCHECK_STR:  0x7E
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

saroy94 · 23 Aug 2010

Ok thanks, so it's definatly the RAM that i must get repaired or return it.

Tews · 23 Aug 2010

You cant "repair" ram.. you will need to replace it..

Windows 7: Crashes after installing new RAM

Crashes after installing new RAM problems?