Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Constant Random BSODs on a 5 days old system

24 Aug 2010   #11

Windows 7 Professional x64

Microsoft drivers are assumed to be stable, so there is no point in stressing them. It will just slow down your computer.

The way Verifier works, it stresses all drivers checked, in hopes of causing them to BSOD. When it happens, we can look at the dump and hopefully find the cause.

Just use your computer normally while Verifier is running, but don't start anything that you can't afford to lose in a BSOD.

My System SpecsSystem Spec
24 Aug 2010   #12

Windows 7 Home Premium 64bit OEM

"After a reboot, driver verifier should be enabled."

Ok, so what I did last time was what the topic said, and rebooting went fine(is that the clear sign, or am I supposed to use my computer during the time the verifier is on?

What I also did was during the driver selection, I clicked on "show not loaded drivers" and selected them all except the windows and the 2 named.
Then I couldn't reboot. During signing out it gave a BSOD(c1).
My guess is that I wasn't supposed to check the not loaded drivers, so what I'll do NOW is reboot again with only the loaded drivers selected. brb

back after a reboot. No problems so far. What I'll do NOW is play a game with driver verification on until my system crashes.
Or is there something else I should test?

My System SpecsSystem Spec
24 Aug 2010   #13

Windows 7 Professional x64

Just use your system just as you normally would. Play whatever games you normally play, go to the sites you normally do, and pretend Verifier is not running.
My System SpecsSystem Spec

24 Aug 2010   #14

Windows 7 Home Premium 64bit OEM

So the next BSOD is the Data Jackpot :P ?
My System SpecsSystem Spec
24 Aug 2010   #15

Windows 7 Professional x64

If it's a driver issue you're having, then hopefully yes.

If the dump still doesn't point to a specific cause, we can then assume it is either a hardware problem, or low-level driver.
My System SpecsSystem Spec
24 Aug 2010   #16

Windows 7 Home Premium 64bit OEM

Ok, I got my BSOD. Not really at a nice time though:
I was getting ready for bed and wanted to shut my computer down. So I Clicked Shutdown.
And it was shutting down and BOOF, BSOD.

So I can't seem to shutdown xD Because the system will reboot after the BSOD xD

Here are the Files:

Thanks for looking into this again
My System SpecsSystem Spec
24 Aug 2010   #17

Windows 7 64-bit

I've experienced the same BSOD's as you and struggled for a couple months until I found the problem. I suspect the culprit in your case, as it was in mine, is the Gigabyte GA-770TA-UD3 M/B itself!

After 3 weeks of random BSOD's with a new system last Spring, I ended up RMA'ing the RAM, which didn't help. Finally received Gigabyte RMA authorization and returned the board. Week and half later, got it back with no explanantion. After calling, I was told they couldn't find anything wrong with it. Spoke with the manager and convinced them to allow a board replacement. When the new one arrived, it worked fine for a day and half but guess what, starting spitting out BSOD's and random restarts.

Long story short, I just ended up replacing the M/B with a MSI 790X-G45 and have run two weeks of torture tests without a single hiccup... it's been perfect!

Check out the Newegg customer satisfaction reviews and you'll see many reports of the same issue. Some have "fixed" their boards by raising the Northbridge voltage by 0.1 volts (directly from Gigabyte technician), while others have raised their PCIx and Vcor by .15 -.25 volts. But in my particular case, it didn't help.

Always liked their products but will never buy another one of these boards. If you got the resources, run, don't walk and replace the board. You'll hopefully save yourself a lot of headaches down the road.
My System SpecsSystem Spec
25 Aug 2010   #18

Windows 7 Home Premium 64bit OEM

@BWpotter, that sounds very scary! I don't want my mobo to be, well broken

I Decided to stress my system a little by running a benchmark(performance test by And it gave me another 3B crash.
Here are the files
My System SpecsSystem Spec
25 Aug 2010   #19

Windows 7 Professional x64

Looks like Gigabyte's Dynamic Energy Saver Advanced program is the cause here, not the first time by any means.

Please remove it, and see what happens.

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\Jonathan\Desktop\Downloads\Documents\Windows7_BSOD_jcgriff2\082510-21528-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*
Executable search path is: 
Windows 7 Kernel Version 7600 MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02e0a000 PsLoadedModuleList = 0xfffff800`03047e50
Debug session time: Tue Aug 24 18:23:45.054 2010 (UTC - 4:00)
System Uptime: 0 days 3:24:45.083
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck C1, {fffff9802f1c8ff0, fffff9802f1c8ffc, 2d000c, 24}

Unable to load image \??\C:\Windows\gdrv.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for gdrv.sys
*** ERROR: Module load completed but symbols could not be loaded for gdrv.sys
Probably caused by : gdrv.sys ( gdrv+30c7 )

Followup: MachineOwner

0: kd> !analyze -v
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Special pool has detected memory corruption.  Typically the current thread's
stack backtrace will reveal the guilty party.
Arg1: fffff9802f1c8ff0, address trying to free
Arg2: fffff9802f1c8ffc, address where bits are corrupted
Arg3: 00000000002d000c, (reserved)
Arg4: 0000000000000024, caller is freeing an address where bytes after the end of the allocation have been overwritten

Debugging Details:





PROCESS_NAME:  essvr.exe


IRP_ADDRESS:  fffff9802c380f3b

LAST_CONTROL_TRANSFER:  from fffff80002f81843 to fffff80002e7a740

fffff880`06d0d4f8 fffff800`02f81843 : 00000000`000000c1 fffff980`2f1c8ff0 fffff980`2f1c8ffc 00000000`002d000c : nt!KeBugCheckEx
fffff880`06d0d500 fffff800`02fad356 : fffff800`02e0a000 00000000`20206f49 ffffffff`ffef7148 fffffa80`04e24200 : nt!MmFreeSpecialPool+0x383
fffff880`06d0d630 fffff800`02e99d9e : 00000000`00000000 fffff980`2c380fb0 fffff980`2c380ee0 fffff980`2c380fb0 : nt!ExDeferredFreePool+0xf13
fffff880`06d0d6e0 fffff800`02e7d0dd : fffff980`2c380fb3 fffff800`00000001 00000000`00000001 fffff880`00000005 : nt!IopCompleteRequest+0x5ce
fffff880`06d0d7b0 fffff800`0331a19f : fffff980`2c380ee0 fffffa80`07556400 fffff980`2c380f00 00000000`00000000 : nt!IopfCompleteRequest+0x75d
fffff880`06d0d890 fffff880`07d710c7 : fffff880`07d71a50 00000000`00000008 00000000`00000000 fffff980`2c380fb0 : nt!IovCompleteRequest+0x19f
fffff880`06d0d960 fffff880`07d71a50 : 00000000`00000008 00000000`00000000 fffff980`2c380fb0 00000000`00000001 : gdrv+0x30c7
fffff880`06d0d968 00000000`00000008 : 00000000`00000000 fffff980`2c380fb0 00000000`00000001 00000000`00000000 : gdrv+0x3a50
fffff880`06d0d970 00000000`00000000 : fffff980`2c380fb0 00000000`00000001 00000000`00000000 00000000`00000001 : 0x8


fffff880`07d710c7 ??              ???


SYMBOL_NAME:  gdrv+30c7

FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  gdrv.sys


FAILURE_BUCKET_ID:  X64_0xC1_24_VRF_gdrv+30c7

BUCKET_ID:  X64_0xC1_24_VRF_gdrv+30c7

Followup: MachineOwner
My System SpecsSystem Spec
25 Aug 2010   #20

Windows 7 Home Premium 64bit OEM

Just deinstalled it, didn't need it anyway.
The question is, I have to Reboot now. My guess is I'll get the crash on shutdown again(the C1 one)
I'll let you know in a sec
My System SpecsSystem Spec

 Constant Random BSODs on a 5 days old system

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Experiencing Random BSODs Every Few Days
For the last month I have been experiencing seemingly random BSODs every few days. Initially I thought the Comodo Dragon browser was the cause, however the last two have occurred while the browser was closed. The last two referenced a Bad Pool Caller and a Bad Pool Header respectively. Any...
BSOD Help and Support
Please see my mini DUMP files attached blow. (only the ones form last 2 days are relevant). Bugcheck: 0x00000139 I tried finding more in the DUMPs with BlueScreenView but all point to ntoskernel.exe , parameter 3 and i can't figure much out beyond that. Please help This is winodws 8 x64. ...
BSOD Help and Support
Random BSODs been happening every 2-3 days or so, for 6 months.
I really tried to be patient, but man. It started out as a BSOD every few days or so, but now it's getting more and more frequent. There's all kinds of BSODs, Kernel data inpage error, page default error, and so on. I've lost count on how many kinds I've went through. I even sent it in for...
BSOD Help and Support
Random BSODs for 2 days, system has been stable for 2+ yrs
Random BSODs for the last 2 days, no problems for 2 yrs+ on this system
BSOD Help and Support
3 random bsods the past few days
Just browsing the internet and listening to music each time. Windows 7 Home Premium x64 OEM Only hardware changes are installed a new sound card a few weeks ago (Creative Sound Blaster X-Fi Titanium HD), and just got a new keyboard (Ducky Shining). Attached is a zip containing a...
BSOD Help and Support
Constant random BSoDs
I built a computer around November and it hasn't ever been running perfectly since. I installed a legitimate version of Windows 7 64 bit. I've been using WhoCrashed to figure out what happened but it's not completely clear on the causes. There used to be occasional overheats that I've fixed and...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:41.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App