Frequent BSODs - 30 to 60 minutes apart

TermiNader

New member
Local time
9:54 PM
Messages
6
Location
Yorba Linda, CA
Windows 7 . . .
- x64
- original installed OS on the system
- full retail version

- age of system (hardware) is almost one year (custom built Nov 2009)
- age of OS installation is same as hardware (OS not re-installed)

Everything has been working well for almost a year. Starting about three days ago, my system will barely stay available for 30-60 minutes at a time

I get PFN_LIST_CORRUPT, MEMORY_MANAGEMENT, PAGE_FAULT_IN_NONPAGED_AREA and IRQL_NOT_LESS_OR_EQUAL BSODs and cannot pinpoint the problem.

Have already tried SFC /SCANNOW.

Please help!!!


Nader
 
Last edited:

My Computer My Computer

At a glance

Windows 7 Professional x64i5 750OCZ DDR3 4GBNvidia GT 220
Computer Manufacturer/Model Number
Custom
OS
Windows 7 Professional x64
CPU
i5 750
Motherboard
Asus P7P55D
Memory
OCZ DDR3 4GB
Graphics Card(s)
Nvidia GT 220
Sound Card
Motherboard based
Monitor(s) Displays
Hanns-G 28" 1080p
Hard Drives
1.5TB Seagate Barracuda (2) in RAID 1
PSU
Antec 650W
Case
Cooler Master
Cooling
Antec 120mm
Is this one too difficult to figure out?

Does anyone have a clue about this one?
 

My Computer My Computer

At a glance

Windows 7 Professional x64i5 750OCZ DDR3 4GBNvidia GT 220
Computer Manufacturer/Model Number
Custom
OS
Windows 7 Professional x64
CPU
i5 750
Motherboard
Asus P7P55D
Memory
OCZ DDR3 4GB
Graphics Card(s)
Nvidia GT 220
Sound Card
Motherboard based
Monitor(s) Displays
Hanns-G 28" 1080p
Hard Drives
1.5TB Seagate Barracuda (2) in RAID 1
PSU
Antec 650W
Case
Cooler Master
Cooling
Antec 120mm
Yup, although the dump isn't entirely helpful. It appears that there is some corruption in the dump, likely by a driver, but the dump did not capture the failure, only the corruption after the fact. Please enable driver verifier, and get us another dump.
 

My Computer My Computer

At a glance

Windows 10 Pro x64Intel Core i7 4790K @ 4.5GHz32GB DDR3Nvidia GeForce GTX970
Computer type
PC/Desktop
Computer Manufacturer/Model Number
Custom
OS
Windows 10 Pro x64
CPU
Intel Core i7 4790K @ 4.5GHz
Motherboard
Asus Maximus Hero VII
Memory
32GB DDR3
Graphics Card(s)
Nvidia GeForce GTX970
Sound Card
Realtek HD Audio
Screen Resolution
1920x1200
Hard Drives
1x Samsung 250GB SSD
4x WD RE 2TB (RAIDZ)
PSU
Corsair AX760i
Case
Fractal Design Define R4
Cooling
Noctua NH-D15
Thanks for checking - could not get back into Windows with Verifier ON

Some more clues:

My system appears stable (for at least half a day) after I reloaded my last saved BIOS profile (just thought to give it a try)

When I turn Verifier ON, Windows will not boot
1 - Keep seeing Windows logo and then a quick BSOD before almost showing my desktop or
2 - Windows logo keeps displaying indefinitely or
3 - Disk check is requested then repeat 1 and 2 above

I was only able to get back to Windows during bootup by requesting to load the 'last successful configuration'. Even Safe Mode wouldn't work.

Once I got back into Windows, I created another BSOD file and perfmon report (see attached). I ran Verifier to see if anything had been logged, but there wasn't anything there when I displayed existing settings.

So, I assume there is some driver that is enabled during bootup that is causing my problems.

Do you see any more clues that might help? Thanks for your time!!!
 

My Computer My Computer

At a glance

Windows 7 Professional x64i5 750OCZ DDR3 4GBNvidia GT 220
Computer Manufacturer/Model Number
Custom
OS
Windows 7 Professional x64
CPU
i5 750
Motherboard
Asus P7P55D
Memory
OCZ DDR3 4GB
Graphics Card(s)
Nvidia GT 220
Sound Card
Motherboard based
Monitor(s) Displays
Hanns-G 28" 1080p
Hard Drives
1.5TB Seagate Barracuda (2) in RAID 1
PSU
Antec 650W
Case
Cooler Master
Cooling
Antec 120mm
According to the latest dump, you had a processor error:

Code:
0: kd> .time
Debug session time: Fri Aug 27 18:30:04.970 2010 (GMT-4)
System Uptime: 0 days 0:00:09.438

0: kd> .bugcheck
Bugcheck code 00000124
Arguments 00000000`00000000 fffffa80`06ca9748 00000000`00000000 00000000`00000000

0: kd> kn
 # Child-SP          RetAddr           Call Site
00 fffff880`035c46f0 fffff800`034cba89 nt!WheapCreateLiveTriageDump+0x6c
01 fffff880`035c4c10 fffff800`033ad667 nt!WheapCreateTriageDumpFromPreviousSession+0x49
02 fffff880`035c4c40 fffff800`03315c45 nt!WheapProcessWorkQueueItem+0x57
03 fffff880`035c4c80 fffff800`0328e961 nt!WheapWorkQueueWorkerRoutine+0x25
04 fffff880`035c4cb0 fffff800`03525c06 nt!ExpWorkerThread+0x111
05 fffff880`035c4d40 fffff800`0325fc26 nt!PspSystemThreadStartup+0x5a
06 fffff880`035c4d80 00000000`00000000 nt!KxStartSystemThread+0x16

0: kd> !errrec fffffa8006ca9748
....
===============================================================================
Section 2     : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor    @ fffffa8006ca9858
Section       @ fffffa8006ca99e0
Offset        : 664
Length        : 264
Flags         : 0x00000000
Severity      : Fatal

Error         : Internal unclassified (Proc 0 Bank 5)
  Status      : 0xfa00000000400405
If you enable verifier and you bugcheck, I think you may be right. It's probably useful to do a memtest, Prime95, and FurMark stress tests to verify your hardware really is not showing an issue that could be causing these, but if those pass, you're going to need to take a close look at what you've got installed that would have boot-critical drivers other than the OS itself.
 

My Computer My Computer

At a glance

Windows 10 Pro x64Intel Core i7 4790K @ 4.5GHz32GB DDR3Nvidia GeForce GTX970
Computer type
PC/Desktop
Computer Manufacturer/Model Number
Custom
OS
Windows 10 Pro x64
CPU
Intel Core i7 4790K @ 4.5GHz
Motherboard
Asus Maximus Hero VII
Memory
32GB DDR3
Graphics Card(s)
Nvidia GeForce GTX970
Sound Card
Realtek HD Audio
Screen Resolution
1920x1200
Hard Drives
1x Samsung 250GB SSD
4x WD RE 2TB (RAIDZ)
PSU
Corsair AX760i
Case
Fractal Design Define R4
Cooling
Noctua NH-D15
Back
Top