Windows 7: BSOD. When converting raw,dng to jpeg

disgo55 · 15 Sep 2010

Hi, Hope someone can help me out. My Computer keeps BSOD,when i try to convert my 2000 DNG files of my Grandson, to jpeg in lightroom v3.2. It also BSOD While trying to convert .avi files Iv collected to DVD. Attached are log files from last bsod. Thanks.

Lemur · 15 Sep 2010

These drivers are old (going out for lunch. brb)

Capt.Jack Sparrow · 15 Sep 2010

Hello and Welcome !

Seems like some Hardware is causing the problem. Follow this article make sure you cover all the points. http://www.sevenforums.com/crash-loc...-new-post.html

Uninstall ESET ESET Knowledgebase - Uninstallers (removal tools) for common antivirus software and installed MSE i.e. http://www.microsoft.com/security_essentials/

Run a Hardware Diagnostic (Memory and Hard Drive) follow this link for instructions Hardware Diagnostic !! « Captain Debugger

Try this free video stress test: FurMark: Graphics Card Stability and Stress Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net

Quote:

FurMark Setup:
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature"
Click "Go" to start the test
- Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
- Click "Quit" to exit

Try this free stress test: Free Software - GIMPS

Quote:

Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead.
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
The Test selection box and the stress.txt file describes what components that the program stresses.
My System SpecsSystem Spec

Bugcheck:

Code:

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 00000000, Machine Check Exception
Arg2: 86f6a024, Address of the WHEA_ERROR_RECORD structure.
Arg3: b6282000, High order 32-bits of the MCi_STATUS value.
Arg4: 00000145, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------


BUGCHECK_STR:  0x124_AuthenticAMD

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  FabCore.exe

CURRENT_IRQL:  1f

STACK_TEXT:  
807cc8cc 82e24f3f 00000124 00000000 86f6a024 nt!KeBugCheckEx+0x1e
807cc908 82f1bf04 86f69051 86f6a024 82eb54d0 hal!HalBugCheckSystem+0xab
807cc938 82e251f1 86f59368 82e32e40 00002800 nt!WheaReportHwError+0x230
807cca4c 82e252e3 86f59368 86f593b8 00000000 hal!HalpMcaReportError+0x3b
807cca70 82e2554f 00000000 86f593b8 807ccb90 hal!HalpMceHandler+0x8b
807cca80 82e1b5f5 00000000 00000000 f0f0f4f8 hal!HalpHandleMachineCheck+0x3b
807ccb90 82e18261 00000000 807c7750 f8f0f0f0 hal!HalpMcaExceptionHandler+0x87
807ccb90 00000000 00000000 807c7750 f8f0f0f0 hal!HalpMcaExceptionHandlerWrapper+0x89


STACK_COMMAND:  kb

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: hardware

IMAGE_NAME:  hardware

DEBUG_FLR_IMAGE_TIMESTAMP:  0

FAILURE_BUCKET_ID:  0x124_AuthenticAMD_PROCESSOR_CACHE

BUCKET_ID:  0x124_AuthenticAMD_PROCESSOR_CACHE

Hope this helps,
Captain

disgo55 · 19 Sep 2010

Hi thanks for the reply's. I uninstalled ESET Smart Security, & installed Microsoft Security Essentials,plus using Windows 7 firewall. I ran Lightroom v3.2 again to covert my dng`s files to jpeg, 5 to 10 min later, BSOD. Here are the new dump files. Please bare in-mind,that im quite new to all this, please if you can, reply in terms i can understand. Thank you

disgo55 · 22 Sep 2010

OK guys, i done a CPU test using prime95, after 5 to 10 min, i got errors.
Then i used CPU Stability Test 6.0,this time i got BSOD after 10min. Silly question to ask,but do you think my CPU is faulty ? Thanks.

Capt.Jack Sparrow · 22 Sep 2010

Yes it's the CPU. Are you Overclocking ? If so reset the BIOS to default settings. Did you ran the MemTest86+ 6 to 8 passes if not run it. I'm not an expert in hardware. But i would check these settings.

- Captain

Lemur · 22 Sep 2010

Try uninstalling DVDFab

Jacee · 22 Sep 2010

What Lemur said

http://www.finaluninstaller.com/blog...ll-dvdfab.html

Wishmaster · 22 Sep 2010

disgo55,

Running MEMtest at this point would be a good idea.

Do you have a Temprature monitoring utility? Im curious what the Temps are.

Also, would you mind running CPUZ and posting snips of the Memory, SPD, and CPU tabs please.
(Found Here: CPUID - System & hardware benchmark, monitoring, reporting )

disgo55 · 23 Sep 2010

Quote: Originally Posted by Capt.Jack Sparrow

Yes it's the CPU. Are you Overclocking ? If so reset the BIOS to default settings. Did you ran the MemTest86+ 6 to 8 passes if not run it. I'm not an expert in hardware. But i would check these settings.

- Captain

Thank you Captain.
I don't think im Overclocking.Not tried MemTest86+ yet,but will give it a go.

Windows 7: BSOD. When converting raw,dng to jpeg

BSOD. When converting raw,dng to jpeg problems?