Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Bluescreens


28 May 2009   #11
Microsoft MVP

 
 

The dump file shows that the crash occurred while running Patrician3.exe and it seems to have occurred in the USB drivers.

the presence of a memory device without proper drivers could easily cause this sort of error. So, the first thing to check would be the drivers for the PCI Flash Memory device. First try right clicking on the device and selecting "Update drivers". If that doesn't find anything, right click on the device and select the Details tab. Let us know what the hardware ID is for that device and we'll see about locating drivers for it.

The next thing to check would be what you have plugged into the USB ports. In particular I'd wonder about input devices that are connected (due to the presence of HIDCLASS and hidusb in the stack text).


My System SpecsSystem Spec
.

28 May 2009   #12

Windows 7 Ultimate x64
 
 

Hardware IDs for the PCI Flash Memory
Quote:
PCI\VEN_1524&DEV_0551&SUBSYS_002014C0&REV_01
PCI\VEN_1524&DEV_0551&SUBSYS_002014C0
PCI\VEN_1524&DEV_0551&CC_050100
PCI\VEN_1524&DEV_0551&CC_0501
The only thing that was connected through a USB port was a mouse.
My System SpecsSystem Spec
29 May 2009   #13
Lee

Win 7 Pro x64, VM Win XP, Win7 Pro Sandbox, Kubuntu 11
 
 

Went through what you posted last night then again this morning and just can't figure where your problem is at; have you tested you memory (might be something wrong there). Am looking up some of the problems listed, will try to get back later today.
My System SpecsSystem Spec
.


29 May 2009   #14
Lee

Win 7 Pro x64, VM Win XP, Win7 Pro Sandbox, Kubuntu 11
 
 

Just finished going through all the data you posted and it would appear that there is something wrong with one of your USB ports; haven't been able to determine what it is, however, here is a MS site that might help: USB port may stop working after you remove or insert a USB device. Sorry can't help you further. Hope you are able to get it and running.
My System SpecsSystem Spec
30 May 2009   #15
Microsoft MVP

 
 

The ID's that you posted appear to belong to a company called ENE Technology Inc
and they most likely belong to a flash card reader on your system.

It's conceivable that it's not functioning properly and this could be affecting the rest of the system (but that usually doesn't happen).

I'd suggest going to the system manufacturer's website and downloading the drivers for the card/media reader and installing them. Then see if it still gives the BSOD's - and we'll troubleshoot that further.
My System SpecsSystem Spec
Reply

 Bluescreens




Thread Tools



Similar help and support threads for2: Bluescreens
Thread Forum
I keep getting bluescreens from BC2 BSOD Help and Support
A lot of Bluescreens BSOD Help and Support
Solved Bluescreens all over BSOD Help and Support
Bluescreens BSOD Help and Support
Bluescreens BSOD Help and Support
Bluescreens and even more of them... BSOD Help and Support
Bluescreens on my new PC BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:07 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33