BSOD will not complete minidump!

About a month ago I had posted in this forum with some issues and was told to remove my atheros wireless usb driver.

I just now got a direct connection to a cable modem and have had nothing but trouble since.

I had one instance of a "system service exception" 000000...x3b bsod which would not complete the minidump.

After this occurred when I restarted the computer It would not load windows and required me to repair using the Win7 disc. It said there was some file corrupted. and the disc "repaired" it... while doing this I told the system to scan my memory on the next startup.

No mem errors were reported. I had also run memtest to about 800% 2 months ago. Still a possible culprit though

Now the system will load windows but if I play video on youtube or HULU on fullscreen it will almost immediately Crash.

Whats really strange is that half of the crashes wont even bluescreen. It will go to the gigabyte emblem screen and then load windows again.

When It does bluescreen MOST of the time it will not complete the minidump and it has the 000000...0x1E message. all the other codes are all 000000x0

Today it completed a minidump but the error message was different?

This has been going on since yesterday. Ive been busy studying and have been unable to figure anything else out. I updated my LAN driver and my vid drivers are current... the atheros usb is no longer connected to system.

I am seriously considering doing a clean install of windows.

This has been going on since yesterday. Ive been busy studying and have been unable to figure anything else out.

Please assist,

Mike

SYSTEM: Win7 ultimate 64bit
AMD 955x4
HIS ATI 4870 1gb
gigabyte 880ga-ud3h
4gb adata 1600 ddr3
1tb samsung f3
antec 650W ps
Antec 300 case all fans
CM 212+ HS
LG 21.5 1080p 2ms

MiniDump is attached


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80002D7A9B2
BCP3: FFFFF880031A1A48
BCP4: FFFFF880031A12B0
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1


MiniDump is attached

Another update:

I just got hulu to play a show for like 2 min, then crash again. No bsod just system lock with humming noise coming through speakers. Also Note that it does this when screen is maximized.

Tried to run Starcraft 2 to see if it is flash or some such and about 1.5 min into game it did the same thing, Again no Blue Screen just system Lock with noise.
Note* I am Currently running Furmark without lock up, also I was just searching the web for hrs before trying hulu again. Definite link to.... Audio???

Please Help,

Mike

Ran Memtest for 7 passes. No errors

Could someone please Look at my minidumps and help me out.

Thank you,

Mike

Beast52702 said:

MiniDump is attached


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80002D7A9B2
BCP3: FFFFF880031A1A48
BCP4: FFFFF880031A12B0
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1


MiniDump is attached

It's seem you have driver issue.
Do system file checker
Uninstall speedfan and update your c-media driver

Code:

speedfan speedfan.sys Sun Sep 24 20:26:48 2006 (45168798)
cmudax3  cmudax3.sys  Tue Dec 01 10:31:07 2009 (4B148DFB)

You may try to disable/uninstall ATI Catalyst Control Center for a while and see if the problem still occurs..

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff80002d7a9b2, fffff880031a1a48, fffff880031a12b0}

Probably caused by : ntkrnlmp.exe ( nt!CmpDelayDerefKCBWorker+d6 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80002d7a9b2, The address that the exception occurred at
Arg3: fffff880031a1a48, Exception Record Address
Arg4: fffff880031a12b0, Context Record Address

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".

FAULTING_IP: 
nt!CmpDelayDerefKCBWorker+d6
fffff800`02d7a9b2 4038ae380b0000  cmp     byte ptr [rsi+0B38h],bpl

EXCEPTION_RECORD:  fffff880031a1a48 -- (.exr 0xfffff880031a1a48)
ExceptionAddress: fffff80002d7a9b2 (nt!CmpDelayDerefKCBWorker+0x00000000000000d6)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000000
   Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

CONTEXT:  fffff880031a12b0 -- (.cxr 0xfffff880031a12b0)
rax=fffffa80039eabb0 rbx=0000000000000000 rcx=fffff8a008316458
rdx=0000000000000bf4 rsi=00fff8a00088e010 rdi=fffff8a008316380
rip=fffff80002d7a9b2 rsp=fffff880031a1c80 rbp=0000000000000001
 r8=fffff8a00005dfa0  r9=000000000734b3fc r10=fffff8a0005f6de8
r11=fffffa80039eab60 r12=fffff80002c8cee0 r13=fffff80002c8cf40
r14=0000000000000000 r15=0000000000000001
iopl=0         nv up ei pl zr na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010246
nt!CmpDelayDerefKCBWorker+0xd6:
fffff800`02d7a9b2 4038ae380b0000  cmp     byte ptr [rsi+0B38h],bpl ds:002b:00fff8a0`0088eb48=??
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  0

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  ffffffffffffffff

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002cbf0e0
 ffffffffffffffff 

FOLLOWUP_IP: 
nt!CmpDelayDerefKCBWorker+d6
fffff800`02d7a9b2 4038ae380b0000  cmp     byte ptr [rsi+0B38h],bpl

BUGCHECK_STR:  0x7E

LAST_CONTROL_TRANSFER:  from fffff80002a94961 to fffff80002d7a9b2

STACK_TEXT:  
fffff880`031a1c80 fffff800`02a94961 : fffff800`02d7a8dc fffff800`02c2c5f8 fffffa80`039eab60 00000000`00000000 : nt!CmpDelayDerefKCBWorker+0xd6
fffff880`031a1cb0 fffff800`02d2bc06 : 0000052a`00000000 fffffa80`039eab60 00000000`00000080 fffffa80`03973890 : nt!ExpWorkerThread+0x111
fffff880`031a1d40 fffff800`02a65c26 : fffff880`02f63180 fffffa80`039eab60 fffff880`02f6dfc0 0000052a`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`031a1d80 00000000`00000000 : fffff880`031a2000 fffff880`0319c000 fffff880`031a19f0 00000000`00000000 : nt!KxStartSystemThread+0x16


SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  nt!CmpDelayDerefKCBWorker+d6

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  4c1c44a9

STACK_COMMAND:  .cxr 0xfffff880031a12b0 ; kb

FAILURE_BUCKET_ID:  X64_0x7E_nt!CmpDelayDerefKCBWorker+d6

BUCKET_ID:  X64_0x7E_nt!CmpDelayDerefKCBWorker+d6

Followup: MachineOwner
---------

I have removed speedfan and am updating cmedia driver.

I am reluctant to remove ccc because i have custom fan profile for my vid card. Plus I can run furmark so I do not think that is the issue. The massive amount of system lockups/restarts/BSODs is recent. All these things have been on my computer for over a month. Any other causes?

"Windows resource protection did not find any Integrity violations"

Scannow found no problems...

Just had another bsod... would not complete minidump
error code 000000000x1e again

Also odd but my adio driver is no longer installed??? I had just updated it to see if that was the issue. Went to Hulu and watched part of a show non maximized with sound working. As soon as I chaged to fullscreen it almost immediately BSOD

*audio*

How can I get it to complete minidump?

Have you updated speedfan and cmedia?
If you got any fresh crash dumps feel free to attach them.