Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD on new computer

04 Oct 2010   #11

Windows 7 Professional x64

Unfortunately, that dump seems to be corrupted.

Make sure the minidump is enabled, and then wait for more BSODs.

If you get more, please follow these directions, even if no Minidumps were saved:

My System SpecsSystem Spec

04 Oct 2010   #12

windows 7 ultimate 32 bit

unfortunately i can get it to BSOD but there ait no mini dump created.. i have done it maybe 10 times.

I have change it to minidump but it still creates a memory dump in windows catalog.
How do I get it to end up in windows\minidump??
My System SpecsSystem Spec
04 Oct 2010   #13

64-bit Windows 8.1 Pro

To configure startup and recovery options to use the small memory dump file, follow these steps.

1 . Click Start, point to Settings, and then click Control Panel.
2. Double-click System.
3 . Click the Advanced tab, and then click Settings under Startup and Recovery.
4 . In the Write debugging information list, click Small memory dump (64k).

To change the folder location for the small memory dump files, type a new path in the Dump File box (or in the Small dump directory box, depending on your version of Windows).
My System SpecsSystem Spec

04 Oct 2010   #14

Windows 7 Professional x64

Just make sure it's set to Minidump, and then upload the jcgriff2 report.

Hopefully there is something in that report that tells us why no minidumps are being saved.
My System SpecsSystem Spec
04 Oct 2010   #15

windows 7 ultimate 32 bit

Ok here is the log if this is the tight one..-Attachment 102183

I have done a memory test again, but this time i was doing it for almost 24 hours.. And i found thing that does not belong there..

Since i have 3 different sets of new RAMs and 2 sets of new motherboards it should not be A hardware fault, it must have some other reason like A voltage problem or something in that stile..

Any solotions?? sinse there was no way to save it i have taken some pictures of it if that is something you need.?
My System SpecsSystem Spec
04 Oct 2010   #16

Windows 7 Professional x64

Make sure to upload the entire Windows_NT6_BSOD_jcgriff2 folder. You'll have to compress it in a .zip or .rar file first.
My System SpecsSystem Spec
07 Oct 2010   #17

windows 7 ultimate 32 bit

Here it is - Attachment 102872

I dont understand how could this be everything is new.. I have newer had this problems before and now i have it on two different sets of parts..

It took some time to upload this catalog cause i had to try some things on my own.. hope some of you find something, ells i can use it as a garden plant stand..
My System SpecsSystem Spec
07 Oct 2010   #18

Windows 7 Professional x64

For now, remove Norton with this tool:

Install Microsoft Security Essentials instead:

Uninstall CCleaner as well, at least for the time being.

Post back if that doesn't help...there is more that can be tried!
My System SpecsSystem Spec
10 Oct 2010   #19

windows 7 ultimate 32 bit

Attachment 103622

Attachment 103623

Attachment 103624

Norton and CC cleaner is gone now as you said, nex step is?
I attached some pictures from memtest if that is any help..
I allso uploaded a new memory dump on Rapidshare se if that one is corrupted as well. http://***************/files/424268093/
My System SpecsSystem Spec
18 Oct 2010   #20

windows 7 ultimate 32 bit

Has anyone found anything about the problem? i'm totaly out of ide's.. so I have put my trust in your people..!
My System SpecsSystem Spec

 BSOD on new computer

Thread Tools

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:59 PM.
Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33