Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Kernal Power Error 41

13 Oct 2010   #1

Windows 7
 
 
Kernal Power Error 41

hey guys

ill just get straight to the point, this seems to be a prittty common error on widnows 7 at the moment however there seems to be little information on ways of soliving it. the problem is that my computer randomley restarts for no reason. when i look in the event view it says kernal power error and reads 'The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.'

its really strange i had this problem around christmas time last year and then it stopped but now it seems to be bk with avengence. last time it was doing this i replaced the cpu update all the software drivers etc, but it just seems to be doing it for no particular reason. i even took it into a pc speicalist who had no idea why either. my computer has plenty of cooling so its not overheating, its surge protected etc.

i was hoping that anyone out there could help shed some light on the situation

kernal power error 41 task categry 63

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />

<EventID>41</EventID>

<Version>2</Version>

<Level>1</Level>

<Task>63</Task>

<Opcode>0</Opcode>

<Keywords>0x8000000000000002</Keywords>

<TimeCreated SystemTime="2010-10-13T07:11:38.688416100Z" />

<EventRecordID>135448</EventRecordID>

<Correlation />

<Execution ProcessID="4" ThreadID="8" />

<Channel>System</Channel>

<Computer>Kosh-PC</Computer>

<Security UserID="S-1-5-18" />

</System>


- <EventData>
<Data Name="BugcheckCode">0</Data>

<Data Name="BugcheckParameter1">0x0</Data>

<Data Name="BugcheckParameter2">0x0</Data>

<Data Name="BugcheckParameter3">0x0</Data>

<Data Name="BugcheckParameter4">0x0</Data>

<Data Name="SleepInProgress">false</Data>

<Data Name="PowerButtonTimestamp">0</Data>

</EventData>


</Event>

My System SpecsSystem Spec
.

13 Oct 2010   #2

Windows 7 Ultimate 32bit
 
 

This error is not your problem its just telling you that the pc did not shutdown correctly you need to look at the error in event viewer before the critical error 41.. Let me know!!!
My System SpecsSystem Spec
13 Oct 2010   #3

Windows 7 x64
 
 

Submit your crash dumps for analysis from C:\Windows\Minidump, if you have any .dmp files in there, and please follow BSOD posting instructions as outlined in the sticky thread in Crashes and Debugging.
My System SpecsSystem Spec
.


13 Oct 2010   #4

Windows 7
 
 

sorry i am abit computer illiterate to some extenet. there doesnt appear to be a minidump folder in c:\windows
its appear the error before is kernel event tracing event 2???
My System SpecsSystem Spec
13 Oct 2010   #5

Windows 7 x64
 
 

Type it into explorer's address bar, C:\Windows\Minidump, if you haven't had crash dumps the folder should be empty.
My System SpecsSystem Spec
13 Oct 2010   #6

Windows 7
 
 

tried it and its asked me whether ive spelt it right, so im assuming its definatly not there
My System SpecsSystem Spec
14 Oct 2010   #7

Windows 7 Ultimate 32bit
 
 

Are you sure your'e not running xp? - If youre running a ATI graphics card install the Expertool from Radeon and right-click the icon after installation to view the eventviewer in the tool..Take a screen shot and upload it..

I think your overheating,,check your temp status in your bios and if the cpu temp is over 50 degrees i'd say -new thermal paste is the way to go...
My System SpecsSystem Spec
14 Oct 2010   #8

Windows 7
 
 

sorry i should have sed, im running windows 7

Processor: AMD Atholon 64 x2
Motherboard: Gigabyte GA-MA770-DS3
Ram: Corsair 4gb ddr2
Graphics: nVida GedForce 9600 gt

as for overheating im not sure it doesnt appear to be but ill have my mate check the bios and tempertautre for me and ill come back. i had the thermal paste done as christmas.
My System SpecsSystem Spec
14 Oct 2010   #9

Windows 7 x64
 
 

Kosh123,

right-click My computer -> System properties -> Advanced tab -> Startup and Recovery -> In the Write debugging information drop-down box, choose Kernel memory dump.

Enable or Disbale 'Kernel Memory Dump' in Windows Vista or 7

My System SpecsSystem Spec
14 Oct 2010   #10

Windows 7
 
 

yeah thats enabled and syas kernel memroy dump want that turning off?
My System SpecsSystem Spec
Reply

 Kernal Power Error 41




Thread Tools



Similar help and support threads for2: Kernal Power Error 41
Thread Forum
.Kernal Power error ID - 41. BSOD Help and Support
Kernal Power Error 41 BSOD Help and Support
Kernal Power Error - Event 41 BSOD Help and Support
Kernal 41 Power Error BSOD Help and Support
Kernal Processor Power Error 37 BSOD Help and Support
Kernal Power 41 error..please help! BSOD Help and Support
Kernal-Power Error BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:47 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33