Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win 7 x64 and GeForce 7300 LE bsod

23 Oct 2010   #1

Windows 7 Ultimate N 64bit
 
 
Win 7 x64 and GeForce 7300 LE bsod

Good morning all,

System Specs:
mobo: ASUS M2A-VM
cpu: Athlon 64 x2 3800+
psu: 550w
gfx: GeForce 7300 LE
ram: 4gb ddr2 800mhz Patriot
hdd: (1) 500gb (1) 20gb
media: cd/dvd burner, multi card reader
other: 4 fan controller

I have been going back and forth with this pc and I'm finally almost done... For some history...

I originally had this pc (same specs, except a 1tb hdd before) running the same O/S, Windows 7 64bit Ultimate N and it ran great. Then my son came charging through the living room and hit the computer and ultimately got the hdd needle stuck, effectively breaking the hdd...
So I went and bought a new hdd...

I only had cds at the time, so I burned the xp iso (yes all my windows are legit) and installed xp 64bit. Everything worked as expected. All happy I prepared to install Win 7...utter fail. Setup would crash, stall, I would get BSOD and so on...

After some hard searching, I removed the GeForce 7300 LE card and removed 4gb of memory. I finally was able to install Win 7! After boot up, I powered down and install the remaining 4gb, boot up went fine. Powered down after doing all available updates and reinstalled the GeForce7300 LE, boot up fine.

Now Windows 7 goes and installs it's driver for the card and says I need restart, so I do. BAM, I get the BSOD. Luckily, I am able to boot into safe mode, still using that card. So I go to nVidia, have them detect my settings and I download the most current driver package, install, restart...bsod...

Now I am in safe mode and can't find an answer...

I would also like to stress that this system worked perfect before and during xp. Can anyone help me!? Below is the output from the Memory dump file from bsod:


Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Windows\MEMORY.DMP]
Kernel Summary Dump File: Only kernel address space is available
Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
*** ERROR: Symbol file could not be found. Defaulted to export symbols for ntkrnlmp.exe -
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02860000 PsLoadedModuleList = 0xfffff800`02a9de50
Debug session time: Sat Oct 23 01:58:16.129 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:18.345
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
*** ERROR: Symbol file could not be found. Defaulted to export symbols for ntkrnlmp.exe -
Loading Kernel Symbols
...............................................................
........................................................
Loading User Symbols
Loading unloaded module list
....
*** ERROR: Symbol file could not be found. Defaulted to export symbols for dxgkrnl.sys -
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 116, {fffffa8007083010, fffff88004747d0c, 0, 2}
*** ERROR: Symbol file could not be found. Defaulted to export symbols for dxgmms1.sys -
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*** ERROR: Symbol file could not be found. Defaulted to export symbols for nvlddmkm.sys -
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
Probably caused by : nvlddmkm.sys ( nvlddmkm+12ed0c )
Followup: MachineOwner
---------

My System SpecsSystem Spec
.

23 Oct 2010   #2

Windows 7 Ultimate x64 Service Pack 1 (Build 6.1.7601)
 
 

Um if I'm not mistaken 7300 is beta build right?
My System SpecsSystem Spec
23 Oct 2010   #3

Windows 8.1 Pro x64
 
 

My System SpecsSystem Spec
.


23 Oct 2010   #4

Windows 7 Ultimate N 64bit
 
 

doing the bsod utility now, thanks. not sure about the beta build thing, i just know that it worked before. i will attach the output as soon as it finishes, then gotta take daughter to ballet class.
My System SpecsSystem Spec
23 Oct 2010   #5

Windows 7 Ultimate N 64bit
 
 

Alright here is the generated files from the utility for bsod, also the perfmon/report had an error, i placed the screen shot of the error inside. time to take daughter ballet, i will have limited email support, looking to resolve this issue as soon as possible, thanks guys.
My System SpecsSystem Spec
23 Oct 2010   #6

Windows 8.1 Pro x64
 
 

Quote   Quote: Originally Posted by jasonwilczak View Post
Alright here is the generated files from the utility for bsod, also the perfmon/report had an error, i placed the screen shot of the error inside. time to take daughter ballet, i will have limited email support, looking to resolve this issue as soon as possible, thanks guys.

Your BSODs are caused by nvlddmkm.sys, part of your Nvidia drivers

Possible causes:bad RAM/PSU, incorrect RAM timings/voltages, bad Graphics card, overheating, outdated driver

Uninstall your Nvidia drivers then use driver sweeper to remove leftover Nvidia files
Guru3D - Driver Sweeper

Then reinstall your Nvidia drivers: NVIDIA DRIVERS 260.89 WHQL

This was likely caused by the following module: nvlddmkm.sys
Bugcheck code: 0x116 (0xFFFFFA8007083010, 0xFFFFF88004747D0C, 0x0, 0x2)
Error: VIDEO_TDR_ERROR
My System SpecsSystem Spec
23 Oct 2010   #7

Windows 7 Ultimate N 64bit
 
 
Another attempt...

ok, so I followed the instructions: Uninstalled the drivers and used the clean sweep. This reinstalled the MS NVidia 7300 driver. (System did an auto hardware install thing). So then I rebooted...bsod, I then did an uninstall and then installed the newest nvidia drivers (that you posted), reboot, bsod... Not sure what to do from here... I've attached the zip containing the two newest bsods...
My System SpecsSystem Spec
23 Oct 2010   #8

Windows 7 Ultimate x64 Service Pack 1 (Build 6.1.7601)
 
 

Try and reset the bios back to default, if you have another graphic card switch it with 7300 and see if it blue screens.
My System SpecsSystem Spec
23 Oct 2010   #9

Windows 7 Ultimate N 64bit
 
 
bios..

Bios is at default except for RAM voltage which is 1.90 due to the modules i'm using. The onboard graphics works ok, except it is below par... but win 7 will load. However, I must stress that my settings worked fine before and now all of the sudden, (using the same Windows 7 iso) they will not work, I do not understand.
My System SpecsSystem Spec
23 Oct 2010   #10

Windows 7 Ultimate x64 Service Pack 1 (Build 6.1.7601)
 
 

When you say "modules i'm using" you are using what do you mean by this?
My System SpecsSystem Spec
Reply

 Win 7 x64 and GeForce 7300 LE bsod




Thread Tools



Similar help and support threads for2: Win 7 x64 and GeForce 7300 LE bsod
Thread Forum
Geforce 7300 LE - Blue screen of death - Multiple lines down screen. Graphic Cards
geForce 7300 LE w/ Gigabyte NX73L accelerator Graphic Cards
graphic geforce 7300 problem Graphic Cards
Geforce 7300 dedicated video memory Graphic Cards
NVIDIA GeForce 7300 GT Graphic Cards
9600 GSO and 7300 GS together Graphic Cards
Windows 7 7300 - fake General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:44 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33