Bsod's
-
Bsod's
Multiple Bsod's usually on startup
Cyberpower build Preinstalled win 7 x64
did a fresh install from supplied disc
amd phenom x6 t1055
8 gigs ram
2x ati 5770 vid cards
1t hardrive
system is 2 months old and cyberpower wants me to ram it for a third time
seeing as how they didnt fix it the first 2 times around im turning here hopefully someone can help me thanks in advance.
If any other info is needed please ask.
-
-
Seems to be caused by your ATI display driver
Possible causes:bad RAM/PSU, incorrect RAM timings/voltages, bad Graphics card, overheating, outdated driver
Uninstall the ATI driver then use driver sweeper to remove leftover ATI files
Guru3D - Driver Sweeper
Then reinstall your driver: ATI Radeon
Update Realtek driver Realtek
This was likely caused by the following module: atikmdag.sys
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8800491BDF0, 0xFFFFF88005B0B770, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
This was likely caused by the following module: rt64win7.sys
Bugcheck code: 0xD1 (0x160, 0x2, 0x0, 0xFFFFF88003F9AB9F)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
-
will give it a shot unfortunately with the fresh install i used driver sweeper and installed the ati 10.10 drivers but will run it again. and will also do the realtek ones.
Thanks will check back if anything changes.
-