Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: DHCP-Client Error causes Crash

02 Nov 2010   #1
Cecil81067

Windows 7 Ultimate x64
 
 
DHCP-Client Error causes Crash

Hello again! I've encountered a new problem that I'm having trouble fixing if you need me to do the zip and all that let me know and I'll work on it but it's pretty specific to this. Even so more info is good so let me know if you need it.

The crashes occur while using FTP to transfer files to anything within my network. I'm currently using FireFox's FireFTP program to do so. I am able to connect to my server but unable to transfer anything since as soon as I do that's when my computer crashes. I looked through the event logs and found this following message:

The IP address lease 192.168.1.2 for the Network Card with network address 0x001A70A37011 has been denied by the DHCP server 192.168.1.1 (The DHCP Server sent a DHCPNACK message).

Apparently this causes a critical error and I get that weird no BSOD but can't do anything type of crash. If anyone can help me out I'd much appreciate it thanks.


My System SpecsSystem Spec
.
02 Nov 2010   #2
reventon

Windows 7 x64, Windows XP SP3, Fedora
 
 

How many computers are on your network? Set them all to static IPs starting from 192.168.1.2 and going up (192.168.1.3 etc...) and see if it makes a difference.
My System SpecsSystem Spec
02 Nov 2010   #3
Cecil81067

Windows 7 Ultimate x64
 
 

I went ahead and tried that and it didn't make a difference the crashes still occur.

We have 2 computers hooked up to the router at all times, one server and one laptop (this one generally not hooked up at all) do you think this might be the DHCP on the router?
My System SpecsSystem Spec
.

03 Nov 2010   #4
reventon

Windows 7 x64, Windows XP SP3, Fedora
 
 

Yes - check the DHCP settings on the router. Reset the router to factory defaults if need be.
My System SpecsSystem Spec
Reply

 DHCP-Client Error causes Crash




Thread Tools




Similar help and support threads
Thread Forum
DHCP Client Service FAILS TO START! (Error 1075)
Hello, On July 12th 2012, my computer installed updates. After rebooting and waiting for me on the login screen, I gave it a hard shutdown to check on the BIOS settings (for a little side project, in the end I did not save any changes). After booting and logging in again, I find that many...
Network & Sharing
What is event ID for dhcp-client IP lease? (Or ia there a better way?)
Hi, I need to do a net use when an IP is assigned via DHCP. The only way that I can find to do this is to schedule a task based on a logged event. To do this I need to specify the log (I picked "Microsoft Windows DHCP Events/Admin") the source (I picked Dhcp-Client) the event ID (this is...
Network & Sharing
DHCP Client cannot be started, Error 5: Access is Denied
As per title, please help? It says Error 5: Access is denied when i try to run it from services.msc, i even opened up services.msc as administrator, same result, any advice please? thank you EDIT: cant get internet, running on static IP now
Network & Sharing
Event 1001 Dhcp client
I've just connected a new PC to my ADSL modem and I get the above error in the event log. Also stating "Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x00etc..... The following error occurred: 0x79. Your computer will...
Network & Sharing
Dhcp-Client
Log Name: Microsoft-Windows-Dhcp-Client/Admin Source: Microsoft-Windows-Dhcp-Client Date: 09/08/2010 00:19:26 Event ID: 1003 Task Category: Address Configuration State Event Level: Warning Keywords: User: LOCAL SERVICE Computer: ...
Network & Sharing
Unable to get IP. No DHCP client
Reference this thread: http://www.sevenforums.com/network-sharing/27738-amazing-network-problem-3.html Router: D-Link d-524 V4000 Ethernet: Nforce via mobo Gigabyte GM-A570SLIv2 I am having similar problems as with the linked thread. What happened with me was I needed to download...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:34.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App