Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD.... Hi again


03 Nov 2010   #1

Windows 7 Professional x64
 
 
BSOD.... Hi again

Hey. Didn't know if i did need to do a new thread but i did it anyway. Sorry for spamming if i didn't need to but here is the files and i get BSOD when i log on to my computer. Or if i success to login there will be a BSOD after 2 min or when i start something.. Thanks in advance Got windows 7 prof x64. Write back if i missed something with the files

My System SpecsSystem Spec
.

03 Nov 2010   #2

Windows 7 Professional x64
 
 

Ehm.. Forgot the perfmon but it says that i cannot do that. A error came up
Wrote perfmon /report
My System SpecsSystem Spec
03 Nov 2010   #3

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by krille32 View Post
Hey. Didn't know if i did need to do a new thread but i did it anyway. Sorry for spamming if i didn't need to but here is the files and i get BSOD when i log on to my computer. Or if i success to login there will be a BSOD after 2 min or when i start something.. Thanks in advance Got windows 7 prof x64. Write back if i missed something with the files


Doing the, now but one thing I can already tell you . You asacpi.sys is from 2005 and is know to bsod always (used in daemon tools and alcohol) remove it

ASACPI.sys Sun Mar 27 22:30:36 2005
Quote:
The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc.-Support- download_item_mkt
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit " (it's about the 8th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).
Since the driver that crashed you has not been listed you should run driver verifier

Beyond that, please run Verifier with these settings:
[quote]
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like. From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

If that doesn't work, post back and we'll have to see about fixing the registry entry off-line:
Code:
Delete these registry keys (works in XP, Vista, Windows 7):
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDrivers
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDriverLevel

Using Driver Verifier to identify issues with Windows drivers for advanced users


Ken J
My System SpecsSystem Spec
.


Reply

 BSOD.... Hi again




Thread Tools



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:01 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33