Multiple BSOD's

Hi all,
I'm new to the forums here, thus this is my first post. (yeay)

Alright back to business:
I am getting a lot of BSOD these days. Some days I can run my laptop for hours other days I can't even get into windows.

Here is a (short) list of BSOD I got recently:
- cdd.dll
- The driver is mismatching system PTE's
0x0000001E
- System service expectations
win32.sys
- 0x0000003B
win32k.sys
- 0x000000D1
- HDaudbuss.sys
- Usbuchi.sys
- intelppm.sys
- memory management
- 0x0..01A
- 0x0..07E

My dump files are attached to the post, or follow this link:
*Removed*

My system is about a year an half old now I think.
I reinstalled windows 7 64x several times already and I have replaced my harddisks.
I just reinstalled my graphic card drivers.
I ran memtest86 for a full night (several times), I finished 10 passes minimum each time and no errors found.
I ran OCCTv3.1.0 for my graphic cards and no errors found there.
- It does say, however, that my CPU is overclocked for almost -30% (thus 30% underclocked)

It would help me alot if somebody could help me a bit here.
Let me know if you need more information.

Thanks in advanced,
Ruud

EDIT1:
I created this post really fast because I'm afraid of more BSOD, thus sorry for all my spelling / grammer mistakes.
EDIT2:
I'm also very sorry if this post looks a bit rude to you, again I'm just afraid that I have to redo the whole thing because of a BSOD.

Hold on ...

Edit:

A few of your crashes were caused by NETIO.sys. You have too many outdated drivers that you should do your best to update - visit both your laptop support as well as devices manufacturers' sites directly.


adpu320.sys Kernel 2/27/2007 4:04:15 PM
adpahci.sys Kernel 5/1/2007 10:30:09 AM
adp94xx.sys Kernel 12/5/2008 3:54:42 PM
Adaptec StorPort Ultra320 SCSI Driver

arc.sys Kernel 5/24/2007 2:27:55 PM
Adaptec RAID Controller

BrFiltLo.sys Brother USB Mass-Stora Kernel 8/6/2006 6:51:06 PM
BrFiltUp.sys Brother USB Mass-Stora Kernel 8/6/2006 6:51:02 PM
Brserid.sys Brother MFC Serial Por Kernel 8/6/2006 6:51:11 PM
BrSerWdm.sys Brother WDM Serial dri Kernel 8/6/2006 6:51:05 PM
BrUsbMdm.sys Brother MFC USB Fax On Kernel 8/6/2006 6:51:00 PM
BrUsbSer.sys Brother MFC USB Serial Kernel 8/9/2006 5:11:02 AM
RemovableDisk
Brother Industries, Ltd.

ebdrv.sys Broadcom NetXtreme II Kernel 12/31/2008 8:29:28 AM
Broadcom

iirsp.sys iirsp Kernel 12/13/2005 1:47:54 PM
Intel/ICP Raid Storport Driver

iaStorV.sys iaStorV Kernel 4/8/2009 9:57:17 AM
Intel Matrix Storage Manager driver

netw5v64.sys Intel(R) Wireless WiFi Kernel 3/26/2009 9:21:24 AM
Intel® Wireless WiFi Link Driver

nfrd960.sys nfrd960 Kernel 6/6/2006 2:11:48 PM
IBM ServeRAID Controller

RTL8167.sys Realtek 8167 NT Driver Kernel 2/26/2009 1:04:13 AM
Realtek 8167

SiSRaid2.sys SiSRaid2 Kernel 9/24/2008 11:28:20 AM
SiSRaid4.sys SiSRaid4 Kernel 10/1/2008 2:56:04 PM
SiS AHCI Stor-Miniport Driver
Silicon Integrated Systems

StkCMini.sys Syntek AVStream USB2.0 Kernel 6/27/2007 12:45:40 AM
Syntek Universal Serial Bus 2.0 Video Mini Driver

tifm21.sys tifm21 Kernel 5/2/2007 1:51:57 AM
Texas Instruments PCIxx21 UltraMedia

vsmraid.sys vsmraid Kernel 1/30/2009 5:18:57 PM
VIA RAID DRIVER FOR X86-32

SynTP.sys Synaptics TouchPad Dri Kernel 6/25/2009 6:47:41 PM
Synaptics TouchPad

elxstor.sys elxstor Kernel 2/3/2009 2:52:11 PM
Emulex LightPulse Storport Miniport Driver

Thanks for you reply!

I am trying to find drivers and install them but I can't really find any.
I found the Realtek 8167 driver and updated it, I also found one for Synaptics Touchpad but it didn't update any files whatsoever.

For the rest I can't find any updates nor drivers.

The Adaptext drivers do not have installers, Brother Industries doesn't have any new drivers and Emulex only support Windows Servers as far as my knowledge.
The drivers that I would download from my laptop manufacturar are already installed and thus are these older versions.

Edit01:
I just found an Automatic Driver installer / detecter for the Intell, I keep you posted if this will update anything.
Edit02:
So I installed all the new updates, but it didn't really change any files after running SFDiag Tool, all the affected drivers/files still show the same date, the Intell website says that the drivers have been updated to the latest version though
Edit03:
No drivers for Broadcom and Silicon Intergrates System available either.
Edit04:
I updated some other drivers but I don't think it did make any changes either, I will attach my latest dump files and driver list etc. to this post.
or got to: *Removed*
Edit05:
Sorry for the many updates/edits, this one will probably be the last one. But I am still getting a lot of BSOD, I just cleaned my laptop a bit and swithed the RAM memory (before making SevenForums2.zip), still waiting if this will do anything.

Any suggestions?
Thanks in advanced,
Ruud

Hi Ruud,
It's better to follow this to collect all necessary files:
Blue Screen of Death (BSOD) Posting Instructions

You have a lot of dump files and most of the crash happen just few minutes after your windows booted up.This could be corrupted OS or Hardware failure.

So I would suggest you to perform memory test for at least 7 passes (better overnight)
RAM - Test with Memtest86+

Then perform System file checker:
Right click Command Prompt -> run as admin -> sfc /scannow

Update this driver:

Code:

tifm21.sys   Wed May 02 01:51:57 2007 --> Texas Instruments PCIxx21/PCIxx12 Integrated FlashMedia Controller

Thanks for you reply!
I already did Memtest86 mutliple times each with a minimum of 10 passes if I remember correctly, no errors here.

I never did the System File checker because it didn't work previously (maybe wrong cmd code), but I will give this a try tonight.

Thanks for your help, I appreciate it.
Ruud

Edit01:
I just finished the System File Check:

Code:

C:\Windows\system32>sfc /scannow
Beginning system scan.  This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files and successfully repaired
them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
example C:\Windows\Logs\CBS\CBS.log
The system file repair changes will take effect after the next reboot.
C:\Windows\system32>

So I will reboot now, thanks again..

Edit02:
To respond to you:

You have a lot of dump files and most of the crash happen just few minutes after your windows booted up.This could be corrupted OS or Hardware failure.

Normally I can use the laptop for hours and then I get one blue screen, and then after that one I just get a lot of blue screens right after start up.. Then after a few hours of "rest" I can use the laptop again and same stuff will happen.

Right now I have to say I haven't got a bluescreen in 1.5 days, so thats pretty good (yeah I know kinda pathetic).

Thanks, I will post more BSOD information with help of the link you send me.

Hello Ruud,
I see the same dmp files as before, so it mean you have not encounter any BSOD since last post.
Then perform sfc /scannow once again to see if your windows had repaired completely.
It report must be "...did not find any integrity violations".

So have your BSOD problem solved?

MeRuud said:

The sfc /scannow says that all is fixed (as you can see above).
I haven't had any blue screens in a long tme, so I hope I can safely say that my BSOD are gone..

That's good news

MeRuud said:

But my computer does freeze, or "black-out" these days .. or I would get a message saying that my graphic driver failed and was succefully recovered. I thus assume this is an issue with one of my graphic cards and/or drivers. I have updated them and they are the latest I could find..

It seems you have TDR failure most cause by VGA driver or defective Hardware.
Try reinstall your Graphic driver. When reinstall, it's better to remove the current driver with driversweeper then download and install a fresh copy.

If it doesn't work then it must be hardware related. You may take a look this method.
https://www.sevenforums.com/1056053-post5.html

MeRuud said:

Also I was wondering, and maybe I should place this in a different forum, but the fact that my laptop is 30% underclocked can this be an issue? 30% is a lot, don't know why they sold me this laptop stating that it was on its full capacity and than its 30% underclocked.
Thanks for all the help guys!
Ruud

I don't know much about overclocking nor underclocking.
And the only thing I can suggest is to check again your Bios version.
Go to Bios --> Check your Bios version and Date
Then compare with available Bios from your Laptop Manufacture website.
Eurocom bios

Well I just thought the BSOD where gone but I just got some more ..
The Dump files are attached to the post.

It seems you have TDR failure most cause by VGA driver or defective Hardware.
Try reinstall your Graphic driver. When reinstall, it's better to remove the current driver with driversweeper then download and install a fresh copy.

If it doesn't work then it must be hardware related. You may take a look this method.
https://www.sevenforums.com/1056053-post5.html

It reinstalled my VGA drivers and still not working, I think it might have to the with my SLI - adapter.. anybody any experience with this??

Thanks,
Ruud

Edit01:
I think I see the problems of the BSOD already, just to give you a heads-up this is what the report.html says:

Code:

Symptom:tv_ConfigMgrErr43
Cause:A device has a configuration problem that prevents it from working properly.
Details:The device, NVIDIA GeForce 9800M GT , is reporting "tv_ConfigMgrErr43". This device will not be available until the issue is resolved. The Plug and Play ID for this device is VideoController2.

Code:

Symptom:tv_ConfigMgrErr43
Cause:A device has a configuration problem that prevents it from working properly.
Details:The device, NVIDIA GeForce 9800M GT , is reporting "tv_ConfigMgrErr43". This device will not be available until the issue is resolved. The Plug and Play ID for this device is PCI\VEN_10DE-DEV_060B-SUBSYS_09021558-REV_A2\6-FF6910A-0-00000008.

Edit02:
I'm going to try to install a older version of the graphic driver, I will keep you posted..