Thanks for the help so far...
I have run Prime95 for around 3 hours and did not get any errors (and no BSOD).
Temperature and voltages seem OK
CPU temp at idle was 30C, at full load was 58C
DDR volatge was the same at idle and full load (1.504V)
The 3.3V rail was 3.344 at idle and 3.328 at full load.
The 12V rial was 12.048 at idel and 11.858 at full load.
I then ran the driver
verifier, I assume the results for this appear in the DMP file, as I saw no results on screen. I have had a few BSOD since the verifier has been on and have attahced my files.