Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Error 711

05 Dec 2010   #1

Windows 7 Enterprise x64
Error 711

Hi there,I had to reinstall my windows because ofthis error.It's annoying.
I fallowed these stepts once it worked,but the second time when this error ocured(last Friday) It didn't worked,and I had to reinstall my windows again.
What should I do to prevent this?
-What I've done first to solve the problem:
"Click Start, right-click My Computer, and then click Manage.
Double-click Services and Applications, and then double-click Services.
Right-click Telephony, and then click Properties.
On the General tab, click Manual next to Startup type.
On the General tab, click Start under Service status, and then click OK.
Repeat steps 3 - 5 for the Remote Access Connection Manager service and for the Remote Access Auto Connection Manager service."
2nd time it didn't worked.

My System SpecsSystem Spec
05 Dec 2010   #2

Windows 7 Ultimate (x64)

I am a bit unsure as to what your error is and when does it occur. When you say "2nd time it didn't worked", what exactly "it" was, what were you trying to achieve?

All the three services you mention I have on Manual start-up. This means that these services are not started automatically at the system start-up, but may be started when necessary. You seem to be describing the procedure of how to start them manually using the Services console. Why would you want to do that? Do you have some program that requires them but fails to start them up?
My System SpecsSystem Spec
05 Dec 2010   #3
A Guy

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x64 SP1

The link he is following is for when the services are disabled:

You receive an "Error 711: Cannot load Remote Access Service Connection Manager" error message when you create a network connection

geniulmalefic, were the services indeed diabled when you checked them? What is their status now? Please explain what the whole problem is, and be as specific as possible. Also have a look here:

A Guy
My System SpecsSystem Spec

05 Dec 2010   #4

Windows 7 Enterprise x64

Sorry,for the 1st mesage I wasn't explain my problem detailed.
So:A couple of weeks ago when I tryed to connect the internet,it gave me an error(711),I've tried this steps Help and Support worked.Last Friday,when I tried to connect the internet,it gave me the same error,I've tried those steps again and it didn't worked,so I had to reinstall my OS.
My System SpecsSystem Spec

 Error 711

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Burnt out from error error error! Time to go back to Paper.
Hello there. I have been redirected here by jamanji, whom has been most helpful by the way. My PC crashed a little over a week ago. Rather than retype everything, I would like to give you the link to my post. I am not 'Tech' per se, but I would like to try and resolve my problem myself, To...
System Security
Error 41, Error 1001 and error 6008.
Hello there. Recently my computer have just randomly shutdown meanwhile i'm playing games like CS;GO, League of Legends. The screen will just turn black and it will start to make one hell of annoying noise untill it reboots. I've updated all my drivers. Tested my memory. Tested my RAM. Run a...
BSOD Help and Support
Error copying file: Data error (cyclic redundancy check). CRC Scan ?
Edit: Think my hard drive may be failing and was the cause of my file synchronizing crash. I use it mostly to stream music and video and access the hard drive a lot. Any advice thanks HDDStatus - Tool to check hard disk status, health and reliability Hey, I've been using GoodSync for the...
Backup and Restore
BSOD by ntoskrnl.exe, error d1, error 3b, error 1a
I've just install windows 7 home premium 64bit and got 4 times of BSOD. for the first time error code is 0x0000001a for the 2nd time error code is 0x0000003b for the 3rd time error code is 0x0000003b for the 4th time error code is 0x000000d1 I also attach minidump files and text files that...
BSOD Help and Support
Scan Error Error while Scan::0::LEAD Error: Twain source manager no
hi.... i have promblme , i do not know how to fix it.. i have kodak scnners i1220 plus i have RD Web Access the promblme is.. I have a system based on Oracle has been connted with one scanners( i connected with scanners) When i do a scan shows me this a message (Scan Error Error while...
Hardware & Devices
BSOD error.. Restarts, but power button stays on, graphics card error?
Hey guys, i want to thank you ahead of time for helping me. This BSOD is a pain in the butt. Intel Pentium 2.8GHZ RAM 3.5 32 bit OS Intel GG965 Express Chipset Family I have already reinstalled the operating system multiple times, i think its a faulty graphics card, but i want to be...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:42.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App