Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Kernel Power Error ID 41

06 Dec 2010   #11
Jonathan_King

Windows 7 Professional x64
 
 

Try running Prime95: http://www.sevenforums.com/tutorials...t-prime95.html

Do you have access to another PSU?


My System SpecsSystem Spec
.

06 Dec 2010   #12
Kyuutoryu

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Jonathan_King View Post
Try running Prime95: http://www.sevenforums.com/tutorials...t-prime95.html

Do you have access to another PSU?
No I don't have another PSU Regarding the Prime95, 5. Keep an eye on your temperatures, and stop the test if the machine starts to overheat. How hot exactly is counted as overheating? And once a error pops out I stop the test?

PS:Can I do other stuff while the test runs? Like game or msn?

PS:I just started it and speedfan is already showing the "fire" icon... http://i211.photobucket.com/albums/b...95speedfan.jpg
My System SpecsSystem Spec
07 Dec 2010   #13
Jonathan_King

Windows 7 Professional x64
 
 

I would be concerned if the CPU went much over 70 C. Don't worry about Speedfan's flame icons.

If an error occurs, you can stop the test.

There is no harm in doing other stuff while the test runs. You may find the system very slow, however.
My System SpecsSystem Spec
.


07 Dec 2010   #14
Kyuutoryu

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Jonathan_King View Post
I would be concerned if the CPU went much over 70 C. Don't worry about Speedfan's flame icons.

If an error occurs, you can stop the test.

There is no harm in doing other stuff while the test runs. You may find the system very slow, however.
Yes I tried gaming but it was so slow I gave up. You came back at the right timing The Prime95 test has ran for almost 12 hours and not a single error. Is that good or bad? :\

http://i211.photobucket.com/albums/b...g/Untitled.jpg
My System SpecsSystem Spec
07 Dec 2010   #15
Jonathan_King

Windows 7 Professional x64
 
 

That's good; I would consider the CPU to be good, as far as we can test it.

I'm interested to see if the network errors are gone yet. Could you upload a new jcgriff2 report for us?

Finally, is it possible that you could purchase a new PSU from a computer components store? Make sure they will allow you to return it, if you don't need it.
My System SpecsSystem Spec
07 Dec 2010   #16
Jonathan_King

Windows 7 Professional x64
 
 

I see another error:
Code:
Event[1056]:
  Log Name: System
  Source: Microsoft Antimalware
  Date: 2010-12-07T08:21:50.000
  Event ID: 3002
  Task: N/A
  Level: Error
  Opcode: Info
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: Jingyu-PC
  Description: 
Microsoft Antimalware Real-Time Protection feature has encountered an error and failed.
     Feature: Behavior Monitoring
     Error Code: 0x80004005
     Error description: Unspecified error 
     Reason: The filter driver requires an up-to-date engine in order to function. You must install the latest definition updates in order to enable real-time protection.
Open MSE, update to the latest definitions, and then run a Full scan.

Carry on with the PSU change, if at all possible. Also, if you can bring yourself to spend the day offline, you might also consider disabling your network adapter in Device Manager.
My System SpecsSystem Spec
07 Dec 2010   #17
Kyuutoryu

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Jonathan_King View Post
I see another error:
Code:
Event[1056]:
  Log Name: System
  Source: Microsoft Antimalware
  Date: 2010-12-07T08:21:50.000
  Event ID: 3002
  Task: N/A
  Level: Error
  Opcode: Info
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: Jingyu-PC
  Description: 
Microsoft Antimalware Real-Time Protection feature has encountered an error and failed.
     Feature: Behavior Monitoring
     Error Code: 0x80004005
     Error description: Unspecified error 
     Reason: The filter driver requires an up-to-date engine in order to function. You must install the latest definition updates in order to enable real-time protection.
Open MSE, update to the latest definitions, and then run a Full scan.

Carry on with the PSU change, if at all possible. Also, if you can bring yourself to spend the day offline, you might also consider disabling your network adapter in Device Manager.
Hmm the MSE is already up to date? o.o I'll run a full scan now. What PSU do you recommend? I bought all my stuff from here...http://fuwell.com.sg/uploads/misc/Fuwell271110.pdf

PS:Strange enough, during the 12 hours of stress testing my com didn't crash o-o
My System SpecsSystem Spec
07 Dec 2010   #18
Jonathan_King

Windows 7 Professional x64
 
 

If the PSU is a little spotty, that may explain why it didn't crash during the 12 hours of testing.
My System SpecsSystem Spec
07 Dec 2010   #19
Kyuutoryu

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Okay MSE done. Nothing came up.

Cousin recommended testing out any 3d game that is cpu and power consuming and see whether it will crash. So I'm downloading crysis demo atm.
My System SpecsSystem Spec
07 Dec 2010   #20
Kyuutoryu

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I found this from another thread...

It is really interesting that so many people experince the same kind of problems, and the other interesting thing is that the configurations with Bsods are all new like mine.I have a Gigabyte P55 chipset board and choosing XMP(Extreme Memory Profile) which automatically adjusts the frequency and voltage of rams and processor seems to work for me since I haven't had bsods till then, it may be worth trying....

Should I try this?
My System SpecsSystem Spec
Reply

 Kernel Power Error ID 41




Thread Tools





Similar help and support threads
Thread Forum
Computer shuts down like power outtage, Kernel Power Error ID 41
Recently I installed a new game on my computer (Far Cry 3), and after a while playing it, my computer suddenly shut down, just like a power outtage (except the power was not out). After debating with friends, I went more towards a hardware problem rather than a software problem, so I thought...
BSOD Help and Support
Getting Kernel Power error ID 41
Hello, Can anyone help me with a constant random Pc reboot error. My event log says it's a kernel Power error ID 41. I really don't know what is wrong with it. Should i re format my pc? I have vital information on my pc for my examinations and i don't want to lose all of them. Plz help me with that...
BSOD Help and Support
Kernel power error
My laptop sometimes shows black screen and than he reboots.....in event wiever i see Kernel power fail ID 41 and don't know how to fix it. I have already repaired my registry by Uniblue registry booster full version. i have W7 HP 64bit, 4GB RAM, Core i3 M350. Often it happens while rendering video...
BSOD Help and Support
Kernel-Power Error 41
Hey everyone, This is my first time posting here, but I have lurked around and read all the threads I could find in regards to this error. I know it's a general error, but I plan to provide as much information as I can. For the past 4 months, my desktop has been shutting down during games. It...
BSOD Help and Support
Kernel-Power Error 41 (63)
Hello, I must preface this requesr for help with the admission that I a virtual novice. I have an HP G71 340 US laptop running Windows 7 Home Premium 64-bit. In the past week, I've returned to my computer unresponsive and with a blank screen and had to manually turn it off and reboot it. The...
BSOD Help and Support
Kernel-Power error (41)???
My Windows 7 . . . - x86 - Full Retail = you purchased it from retailer - What is the age of system (hardware)? nearly 3 years old - What is the age of OS installation (have you re-installed the OS?) around 6 months old I have also attached the required health scan files to be...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App